Regin ED9200, ED9200IP65 User Manual

ED9200

ED9200

External display unit

• Can be used in combination with EXOflex,

Corrigo E* or EXOcompact*

• Background illuminated LCD-display, 4 rows with 20
characters a row

• User-friendly keypad

External display unit for controlling EXOflex, Corrigo E
or EXOcompact. The display offers full external control
when the controller is mounted in a panel or similar.
ED9200 can also be used as a portable hand terminal.

• Durable keypad, protection class IP41
When front mounted with sealant kit, IP65

• Built-in beeper (only with EXOflex)

• The unit is compatible with EP9040

Description

ED9200, external display, is an independent display &
configuration unit which can be connected to either
EXOflex, Corrigo E* or EXOcompact* via two different
electrical interfaces. When it is connected to EXOflex,
it is a free-standing PIFA which can be connected to a
processor house via the EFX-channel.
The display can be connected in two ways, either
temporarily in the front panel of the Power PIFA via
a quick cable connection, or permanently via screw
connectors.

ED9200 is delivered with a drill template for easy
installation on a panel front or similar.

Software requirements

* EXOreal 2.8-1-26 or later for EXOflex
* EXOreal 2.8-1-29 or later for EXOcompact and

Corrigo E
* EXOdesigner or EXOapt 2004 with software patches
For full advantage of the four row display in older

systems, a software patch for EXOapt 2004 is required or
EXOdesigner must be used.

Compatibility with EP9040 (LOT)

ED9200 can be connected to an EXOflex configured for
EP9040 (not meeting the software requirements above).
The display will work but only the two upper text rows
will be displayed.

For correct function with EXOcompact and Corrigo E,
the software requirements above must be fulfilled.

Wiring

There are a number of cables for fast connection, see
overleaf. For connection to Corrigo E or EXOcompact, an
EK12 or EK14 cable should be used.

Indication lamps

The indication lamps have the following functions:

Symbol Function Colour

%

There is one or more
unacknowledged
alarm(s)

Flashing red

There is one or
more remaining,
acknowledged alarm(s)

Fixed red

!

You are in a dialog box
where it is possible to
switch to change mode

Flashing
yellow

Change mode Fixed yellow

P Power supply Green

C Communication with

process station

Green

* Only possible with Corrigo E and EXOcompact
without display.

revision

10 2010

Head Office Sweden

Phone: [phone]
Web: www.regin.se
Mail: [e-mail]

Sales Offices

France: [phone]
Germany: [phone]
Spain: [phone]

Hong Kong: [phone]
Singapore: [phone]

ED9200

Models

ED9200

Basic model

ED9200IP65

Same as basic model but with higher protection class

Connections

Connection terminal ED9200

Terminal Connection to EXOflex

1 + 24 V

2 N (0 V)

3 A (EFX-channel)

4 B (EFX-channel)

Terminal Connection to Corrigo E/EXOcompact

5 SDO - Yellow

6 SDI - Orange

7 SCL - Red

8 N (0 V) - Brown

9 + 5 V - Black

Connection for permanent connection to EP1011

ED9200 Function Terminal EP1011

1 + 24 V 4

2 N (0 V) 3

3 A 2

4 B 1

Connection for fast connection to front of EP1011

ED9200 Function Cable colour USB EP1011

1 + 24 V Red 1

2 N (0 V) Black 4

3 A Green 3

4 B White 2

Dimensions & wiring

Dimensions (w x h x d)

180 x 134 x 23 mm

Wiring

Wiring for connection to EXOflex

EK10, Four-wire cable with connection to EXOflex Main
Power PIFA for use via EFX-channel. (USB type A male
connector and stripped free end).

EK10 - Connecting cable, display unit ED9200, 1.5 m
For other cable lengths, use type CAT-5.

Wiring for connection to Corrigo E* or EXOcompact*

EK12...14, Four-wire cable with connection to Corrigo E/
EXOcompact.

EK12 - Connecting cable, display unit ED9200, 3 m
EK14 - Connecting cable, display unit ED9200, 10 m

At the bottom of Corrigo E/EXOcompact, there is an RJ12
modular jack for fast connection.

* Only possible with EXOcompact without display.

With Corrigo E or EXOcompact With EXOflex

Power supply internal supply via communication cable 24 V DC, via the EFX-channel

Tolerance - 18...30 V DC

Power consumption - 50 mA

Communication port serial, special The EFX-channel

Max cable length 10 m 200 m

Technical data

134

180

Protection class IP41(ED9200), IP65 (ED9200IP65)

Character height display 4,75 mm

This product conforms with the requirements of European EMC standards CENELEC
EN61000-6-1 and EN61000-6-3 and carries the CE-mark.