Page 1
APHETA 3
Important information
Avoid touching the stylus or cantilever. Ensure the cartridge is wired correctly. Always ensure the correct playing weight is set. Always
turn off the amplier when connecting a cartridge. For best performance, use a Rega torque wrench for tting the cartridge. Incorrect
mounting hardware will destroy the internal wires inside the cartridge. Failure to follow these guidelines may invalidate your warranty.
Only use the supplied mounting hardware. The front
third xing is for use on Rega tonearms only.
Using incorrect bolts will destroy the ne wires
inside the cartridge.
Carefully re-t the stylus guard after each use.
Avoid touching the stylus.
Never attempt to adjust the cantilever.
Specications
Tracking pressure 1.9 g - 2.0 g
Input load impedance 100 Ω
Output impedance 10 Ω
Nominal output voltage 350 μV
www.rega.co.uk
Loading...