Reese 44141 User Manual

SERIES 51®

Hitch Shown In Proper Position

Equipment Required:

Fastener Kit: 51068F

Wrenches: 3/4

Drill Bits: None

Installation Instructions

Ford Super Duty

F-Series Truck

Hitch type

Weight Distributing

Weight Carrying

Ball Mount

1

Wiring Access Location: PU1, PU2

2

4
5
2

Part Numbers:

51068
44141

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Max Gross

Trailer WT (LB)

Frame rail

Max Tongue

1000 (454 Kg)10,000 (4540 Kg)

600 (272 Kg)6000 (2724 Kg)

WT (LB)

3
4

2
1

1

2

3

1. Lower spare tire to allow for access to existing slots in vehicle frame rails.

2. Remove existing electrical bracket from vehicle if present and relocate as required.

3. Raise hitch into position and install fasteners as shown above.

4. Raise and position spare tire to allow for clearance between the receiver tube and the hex bolts coming through the frame rails.

Hex Bolt 1/2-13 X 1.75Qty. (8)

SpacerQty. (4)

Conical Washer 1/2Qty. (8)

4

5

Hex Nut 1/2-13Qty. (8)

Lock Washer 1/2Qty. (2)

Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.

z 2004, 2006 Cequent Towing Products

Form: F205 Rev A 5-6-05

Rev. B6-27-0651068NSheet 1 of 1