Reese 38735 User Manual
Chassis
(Not Supplied)
Hitch (Not Supplied)
3” – 2” Adapter
Installation Instructions
3” to 2” ADAPTER
Part Numbers:
38735N
Adapter Shown In Position
Equipment Required:
Fastener Kit: N/A
Wrenches: N/A
Drill Bits: None
Clip
20K or 25K
Hitch
Ball Mount
(Not supplied)
Do Not Exceed Lower of Towing Vehicle
Manufacturer’s Rating or
12,000 LB (11340 Kg) Max Gross Trailer Weight
1,200 LB (1814.4 Kg.) Max Tongue Weight
2” Ball Mount
3” Receiver
Opening
3” – 2” Adapter
¾” Hitch Pin
(See Note 2)
3” – 2” Adapter Shown Assembled
INSTALLATION INSTRUCTIONS
1. Insert 3” – 2” Adapter into the 3” receiver opening.
2. Install the ¾” pin supplied with your 20K or 25K hitch or 25K ball mount and clip.
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. A hitch or ball which has been damaged should be removed and replaced.
Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.
z
2007 Cequent Towing Products
Rev. A7-27-0738735NSheet 1 of 1
Form F206 Rev A 5605
Loading...