Reelcraft B5005 User Manual

Operating Instructions

Series B4000 / B5000 / B5005
Spring Driven Reels

Low, Medium and High Pressure Model Numbers:

B4425 OLP B5450 OLP B4625 OLP B5650 OLP
B5825 OLP B5850 OLP B5435 OMP B5630 OMP
B5835 OMP B5435 OHP B5625 OHP

Dimensions - Size Index

1 2 3

A 12 7/8” 14 3/8” 17 5/8”

B 12 3/8” 14” 16 1/2”

C 8” 9 3/4” 9 3/4”

D 2 1/2” 2 1/2” 2 1/2”

E 5 5/8” 6 1/8” 5 7/8”

SAFETY

1. Do not use reel at higher pressures or temperatures than
listed on the back of this bulletin.

2. Remove all spring tension before beginning dissassembly
process.

*Refer to chart on page 2 for size index numbers.

INSTALLATION:

MOUNTING:

LUBRICATION:

REPLACING HOSE:

ADJUSTMENTS:

REPAIRS:

A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible
misalignment and binding.

The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or
ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing
the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the
reel at the desired position and replace the screws.

Hose reel spring and bearings are factory lubricated and require no further lubrication.

1. Wind spool flange clockwise-facing swivel-until spring is tight.

2. Back off three turns and latch.

3. Insert hose through roller guide.

4. Connect hose fitting to swivel joint and secure hose with clamps.

To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is
obtained.

Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may
void your warranty. Remove all spring tension before beginning disassembly process.

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: [phone]
Customer Service: 855-634-9109 • [e-mail] • www.reelcraft.com

Form# 1236-1122 Rev: 4/2013

Series B4000 / B5000 Spring Driven Hose Reels

Item

#

Description

#

B4425 OLP B4435 OLP B5450 OLP B4625 OLP B5635 OLP B5650 OLP B5825 OLP

Req.

1 Swivel 1 S600886 S600886 S600886 S600886 S600886 S600886 S600915
2 Swivel Union 1 None None None None None None 300010
3 Swivel Union 1 None None None None None None 300010
4 1/4-10 Self Tapping Screw 3 S295-102 S295-102 S295-102 S295-102 S295-102 S295-102 S295-102
5 Sheave Flange 1 400005 400005 260022 400005 260022 260149 260022
6 Sheave Disc 1 400006 400006 500006 400006 500006 260151 500006
7 1” External Snap Ring 1 300031 300031 300031 300031 300031 300031 300031
8 1” I.D. Spacing Washer 2 300034 300034 300034 300034 300034 300034 300034

9 Ratchet Arbor 1 262008 262008 262008 262008 262008 262008 262008
10 10-32 x 3/8 Machine Screw Noted 300001 (5) 300001 (5) 300001 (6) 300001 (6) 300001 (5) 300001 (6) 300001 (6)
11 Base Assembly 1 400101 400101 500101 400101 500101 602505 500101
12 Drive Spring Assembly 1 S400030 S400030 S503755 S404230 S504240 S600050 S505740
13 Main Shaft & Snap Ring Assembly 1 602555 602555 602555 602555 602555 602555 602305
14 Spring Case Assembly 1 S400103 S400103 S500103 S400103 S500103 S600094 S500103
15 10-32 Sarrated Hex Lock Nut Noted 300011 (7) 300011 (7) 300011 (7) 300011 (7) 300011 (7) 300011 (8) 300011 (7)
16 3/8-16 x 1/2 Set Screw 1 300006 300006 300006 300006 300006 300006 300006
17 Spring Case Stud 1 S261360 S261360 S261360 S261360 S261360 S261360 S261360
18 10-32 x 1/2 Machine Screw 2 300002 300002 300002 300002 300002 300002 300002
19 Hose Assembly 1 601001-25 601001-35 601001-50 601013-25 601013-35 601013-50 601020-25
20 Hose Bumper Assembly 1 1-HR1004-A A1-HR1004-A 1-HR1004-A 1-HR1004 A1-HR1004 1-HR1004 2-HR1004-3
21 Guide Arm Assembly 1 S602546 S602546 S602547 S602546 S602547 S602548 S602547
22 1/4-20 Hex Flange Lock Nut 2 261650-1 261650-1 261650-1 261650-1 261650-1 261650-1 261650-1
23 U-Bolt 1 3-117440 3-117440 3-117440 3-117440 3-117440 3-117440 3-117440

Dimension - Size Index # 1 1 2 1 2 3 2

Page 2

www.reelcraft.com