Reed-Prentice Reed Prentice 14 & 16 sliding gear head toolroom and engine lathes Lathes

Download

Page 1

INSTRUCTION BOOK

REED-PRENTICE 14" & 16" SLIDING GEAR HEAD TOOLROOM & ENGINE LATHES

ALBION CORPORATION 1601 WANDA AVENUE FERNDALE, MICHIGAN 48220 2/3-2-7490

Kimberly Clark Corporation 400 Mahannah Avenue Memphis, Tennessee 38107

REPERENTICE CORPORATION

т-17277

Page 2

Page	20 R	Page
GENERAL	HEADSTOCK END
Cleaning	Change Gear Box	. 10
Construction Features 4	Driving Clutch	. 8
Installation 4	Headstock	. 7
Leveling 4	Motor Drive	• 9
Lubrication 5	Speed Plate	. 7
Precautions 6	Spindle	• 8
Serial Number 4	e
		-
APRON AND CARRIAGE	TAILSTOCK END	1.48
Apron and Carriage 11	Tailstock	. 13
Micrometer Chasing Stop 12
Thread Chasing Dial 12
	18
ATTACHMENTS	ORDERING	a contra to Secondaria
Taper Attachment	Instructions	• 16
Collet Attachment		1 3 4

21B

PLANS

Foundation 24891 Head 930-4140 . Head 930-4205 End Feedworks 930-4141 Feed Box 930-4142 . Bed 930-4143A . Apron 930-4144 . Carriage 930-4145 ... Compound Rest 930-4146 . Tailstock 930-4147 ... . . Thread Indicator 930-4167 . Steady Rest 930-4165 Follow Rest 930-4166 . Collet Attachment 930-4148. Taper Attachment 930-4149 . Oiling Diagram 15233 .

PARTS LISTS


	Head	20
	Head, Outside	21A
	End Feedworks	22
	Feed Box	24
*	Bed	26
	Apron	28
	Carriage	30
	Compound Rest	32
	Tailstock	34
	Thread Indicator	36
	Steady Rest	38
	Follow Rest	40
	Collet Attachment	42
	Taper Attachment	44
		100

Page 3

PRINCIPAL FEATURES OF CONSTRUCTION

Reed-Prentice Sliding Gear Head Lathe

11	Headstock	20	Lead Screw Split Nut Lever
2	Speed Change Levers	21	Feed Rod and Lead Screw
3	Back Gear Lever in Headstock		Safety Lever (Prevents En-
4	Lever for Controlling Series		gaging Both Feeds)
	of Feed Change	22	Apron
5	2nd Lever for Controlling	23	Thread Chasing Dial
	Series of Feed Change	24	Steady Rest 🐊
6	Sliding Tumbler Gear Lever	25	Dead Center
7	Lever for Controlling Feed	26	Tailstock Spindle Bind-
	to Lead Screw or Feed Rod		ing Lever
8	Spindle Start, Stop and	27	Tailstock
	Brake Lever (2 Locations)	28	Tailstock Handwheel
- 9	Face Plate	29	Tailstock Clamping Screws
104	Live Center	30	Screw for "Setting Over"
11	Micrometer Carriage Stop		Tailstock (For Taper Turn-
12	Saddle or Carriage		ing)
13	Tool Post	31	Leadscrew Reverse Lever *
14	Compound Rest	32	Bed Ways
15	Compound Rest Feed Screw	33	Lead Screw
	Handle	34	Feed Rod
16	Carriage Cross Feed Handle	35	Chip and Oil Pan
17	Power Cross Feed Clutch	36	Bed
	Lever	37	Collet Attachment Lever
18	Power Longitudinal Feed	38	Collet Cabinet
	Clutch Lever	39	Electric Motor Control Switch
19	Hand Wheel for Longitudinal
	Carriage Travel		8

* Located on AA Lathes beneath lever #4.

Page 4

GENERAL

The Serial Number is stamped on the front surface of the bed at the tailstock end of each lathe. This number identifies the machine and serves as a key to the manufacturer's record.

Cleaning: To prevent rust during shipment the exposed bright parts of the machine are given a coating of heavy grease or slushing compound. This may be washed off with kerosene or naphtha or some of the non-inflammable cleaning agents if preferred. The cleaning operation should be careful and thorough. Remove cover over rear part of cross slide in order to clean the carriage slide and screw.

Correct installation is essential to successful operation and satisfactory performance. Accurate work can only be obtained when lathe rests on a solid foundation. Once the lathe is placed on a firm foundation it should be leveled.

Leveling: For accurate and successful lathe operation the lathe must be absolutely level at head and tail ends, assuring no twist in the bed. Incorrect leveling will eventually cause twist with the result that the lathe will fail to bore or turn true.

Reed-Prentice Lathes are furnished with leveling screws, four for each leg. The location for these leveling screws may be found on the foundation plan.

It is advisable to place a steel plate not less than 1/2" thick under each screw to act as a non-yielding resistance surface.

Page 5

After the lathe has been placed with screws resting on plates a sensitive precision level should be placed across the flats of the carriage (See cut Page 14) as close as possible to the headstock. When headstock end of lathe is perfectly level, then move carriage to tailstock end. Without moving the level, check tailstock end of lathe and adjust with leveling screws. Repeat this procedure until both ends register perfectly level.

When lathe has third leg it also should be leveled longitudinally. Place level on flat scraped surface of the bed between head and center leg and also between center leg and tailstock, and adjust center leg adjusting screws to remove any "hump" or "sag".

When lathe is part of marine equipment, leveling should take place when ship is in calm water or in dry dock.

The lathe alignment should be checked regularly.

Lubrication: After the lathe has been set up it should .be gone over and all bearings flooded with oil while running at a slow speed. (See oiling diagram on following page.)

The headstock operates in a bath of oil, with oil pump and filtration to main spindle bearings. Automatic oiling of the apron and carriage ways is provided by a pump and distributing system.

The apron oil reservoir and the headstock should be drained, flushed out and refilled with oil as specified at least twice a year. At this time the filters over the main spindle bearings and those in the bottom of the oil pumps should be replaced.

Page 6

LUBRICATION SYSTEM

PRECAUTIONS

Keep the machine clean and well oiled. Avoid putting tools or wrenches and files across the bed of the lathe. If you must keep tools on the bed, a board should be provided so as to protect the finished surfaces of the vees.

Remember that the manufacturer has built precision into the machine and that the bed and carriage "flats" are not intended for use as anvils and that such use is detrimental.

Always use wrenches that are a proper fit on the various bolts and screws so as to avoid turning over the corners and finally getting a condition where a pipe wrench is necessary to get a grip. Suitable wrenches are provided with machine.

Page 7

HEADSTOCK

Changes in spindle speeds are effected through sliding gears operated by levers on the outside of the headstock. The speeds available and the lever positions necessary to produce each speed required are shown on plate attached to the headstock, as shown in the drawings below.

Proper operation requires disengagement of the driving clutch before moving the shifting levers. A clutch operating lever is placed at the headstock end of the machine so as to be convenient for this operation. The headstock gears are made of Chrome Molybdenum SAE 4150 electric furnace steel properly heattreated, shaved and lapped. Engaging teeth are rounded to permit the gears to mesh easily. The gears slide upon multiple splined shafts mounted on non-friction bearings.

RENTICE CORP 560 PDM

14" Speed Plate

PRENTICE CORP

16" Speed Plate

Page 8

REMOVE THIS COVER TO ADJUST CLUTCH TO TIGHTEN LOOSEN SCREW WITHDRAW LOCK PLATE FROM NOTCH - TURN NUT ONE NOTCH REPLACE PLATE & TIGHTEN SCREW

An extremely powerful driving clutch is provided. When properly adjusted it will not slip even under extremely heavy cuts. The discs are of steel, faced with "Raybestos" There is but one point of adjustment, easily accessible and consisting of a nut and lock plate. Adjustment is effected

by removing the lock plate and turning the adjusting nut. Turn to the right to tighten and to the left to release. Re-engage the lock plate in one of the slots provided for the purpose.

DETUTNO OTHEOR

A brake is provided for quickly stopping the machine. The clutch and brake are both operated by the clutch levers, one of which is provided at the quick change gear bank and the other at the right hand side of the apron. Both levers are attached to the same operating shaft and operate simultaneously.

SPINDLE

Due to its rugged construction and the ample size bearings

Page 9

used, the spindle will seldom, if ever, require bearing adjustment. All thrust is taken by the two front bearings, which are adjusted by means of locking collars. Rear bearings are fitted in a snugly fitting floating sleeve, allowing compensation for varying headstock and spindle temperatures. Adjustment of the rear bearings is made by releasing the set screw and turning the adjusting collar which is threaded onto the spindle.

The spindle is SAE 6140 Chrome Vanadium alloy steel, heattreated and hardened to Rockwell C36-40. The long taper keydrive spindle nose is standard #L-1, Hardened to Rockwell G55-58. The taper spindle bore is a #15 Jarno. A sleeve is provided as standard equipment to supply a #4 Morse taper. Care should be taken, when inserting centers or bushings into the taper spindle bore, to see that the bore is clean and that the piece to be inserted is clean and free from burrs. Spindles may be ruined by battering of the taper bores due to carelessness.

MOTOR DRIVE

Adjustment of the driving motor to suit the driving element, whether it be chain, flat belt or multiple vee belt is by movement of a hinged plate upon which the motor is mounted. This adjustment is through a screw and nut at the front of the motor plate. To obtain access to adjusting screw remove door of cabinet leg at head end of the lathe. In the case of belt drives it is necessary to avoid getting oil or grease on the belts when oiling the motor, as oil has a detrimental effect on this type of drive.

Page 10

CHANGE GEAR MECHANISM

Power is transmitted to the apron and carriage through the feedworks unit. The rate of feed is controlled by connecting the feedworks gears directly to the spindle. End gears are mounted on anti-friction bearings with "Alemite" system of lubrication and the lower gears run in a bath of oil in an oil tight case provided with a sight oil level gauge.

Three levers D, E, & F control the selection of any particular rate of feed. Obtainable rates are listed on index plate. The sliding tumbler lever D is moved directly under the column in which the desired rate is listed. Levers E and F are moved as required to obtain the exact rate.

Lever G moved to the right will transmit the rate of feed in thousandths to the feed rod. Moved to the left, the rate of feed in threads per inch is transmitted to the lead screw.

The screw is mounted in radial ball bearings and is provided with hardened steel and bronze thrust washers.

Feeds from .0025" to .160" per revolution of spindle and threads from 1-1/2 to 96 per inch can be obtained. Special threads, including metric, can be secured by using special gearing in the endworks.

Page 11

APRON AND CARRIAGE

The apron and carriage receive power from either the feed rod or the lead screw. The feed rod transmits power through gearing in the apron. Lever A controls friction disc clutch for longitudinal feed and lever B for cross feed. Lever C engages and disengages all of the gearing in the apron. The lead screw reverse lever D will reverse the feed rod rotation, making it possible to change the direction of feed.

For Model AA Lathes not equipped with this feature the lever C is arranged to move in a full arc to reverse the direction of feed.

The lead screw is engaged by a split nut operated by Lever E. The direction of movement of the apron is controlled by lever D which reverses the lead screw. Lathes not equipped with this leadscrew reverse lever mounted on the apron will have a reverse lever mounted directly under the oil gauge on the end feedbox. An interlock prevents engagement of the feed rod and the lead screw simultaneously.

The carriage lock screw F is used when it is desired to maintain the position of the carriage for such operations as "facing".

Adjustable dogs are provided on the control shaft under the feed rod and may be set to disengage the feed rod or lead screw

Page 12

at a predetermined point when the carriage is moving in either difection. A fixed collar acts as a safety at the limit of travel.

Lubrication of apron and carriage bearings is by means of a small oil pump immersed in an oil reservoir at the bottom of the apron. Oil tubes lead from this pump to the various lubrication centers.

Adjustment of the feed clutch is made by releasing a set screw and turning the adjusting collar G to the right to tighten and to the left to release.

THREAD CHASING DIAL

When threading a piece of work, the thread chasing dial is used to determine the exact moment to engage the split nut with the lead screw. Thus the successive cuts will follow the same path. Any of the lines on the dial are used as indicators except when work has a fractional number of threads, such as 3-1/2, 6-1/2, 11-1/2. For these fractional pitches the short lines on the dial serve as indicators. When the fraction is not 1/2 the dial cannot be used. It will then be necessary to reverse the lead screw to bring the tool back to the starting point.

MICROMETER CHASING STOP

When making successive cuts on a thread the tool is withdrawn and returned to the identical position as for the preceding cut by using the micrometer chasing stop. This device is incorporated into the carriage cross screw.

Page 13

First the tool is set with respect to the work and then the micrometer stop is engaged. The set screw in the stationary casting is tightened and the set screw in the revolving section is loosened. Set screws and instructions on dial are plainly visible.

The carriage screw is used to remove the tool from the work at end of one threading cut. Upon starting the successive cuts, turning the carriage screw until the "stop" is reached will locate the tool in the same position. The depth of the new cut is governed by turning the top-slide handle.

TAILSTOCK

The tailstock is of the massive two bolt type and is so designed as to permit setting the compound rest parallel with the bed of the lathe. Spindle is carefully fitted and is provided with an equalizing type of binder. A single movement, forward or back, of a convenient lever at the top of the barrel, locks or releases the spindle without affecting alignment.

Lateral adjustment is provided for turning tapers by offsetting the tailstock. When the tailstock is to be offset, it is of course necessary to release the two clamping bolts so as to avoid inaccurate setting due to strains.

Page 14

TAPER ATTACHMENT

The taper attachment provides a method for turning tapers that is much more convenient than "setting over" the tailstock. A taper is turned by holding the taper slide "A" stationary as the carriage moves longitudinally. The bed clamp "B" rests on the back vee of the bed and fits over the rod "C" extending from the taper slide "A". The nut "D" is tightened to securely fasten the rod to the bed clamp which in turn is then clamped to the bed.

The angle of taper is controlled by the setting of the taper bar "E". The angle at which this bar is set is duplicated on the work. Two scales at each end of the bar allow quick setting of the taper. One scale reads in degrees of included angle, the other in inches per foot.

A telescoping feed screw is provided in the carriage so that the full range of the taper may be turned without further adjustment.

However, when setting up the taper attachment, it is essential that the carriage slide be set so that it will move freely throughout the length of taper to be cut.

Page 15

COLLET ATTACHMENT

The collet attachment consists mainly of a spindle nose piece, a pusher tube, and the operating lever. The operating lever is attached permanently to the machine. The pusher tube may or may not remain in the spindle.

This tube is a long length of narrow walled steel tubing and is not placed in the spindle until the collet attachment is to be used. With the pusher tube in place, the collet is inserted in the spindle. The nose piece is assembled to the spindle nose in the same manner as a face plate or chuck.

The lever operates toggles that force the collet into the taper nose causing it to close up and grip the work.

Page 16

PARTS ORDERING INSTRUCTIONS

When ordering any repair parts please supply the following information:

1 Serial number of machine (Stamped on Speed Plate)
2 Model number of machine
3 Part number if possible
4 When ordering gears specify
- (a) Outside Diameter
- (b) Number of teeth
  - (c) Width of teeth
- (d) Diameter of Hole
5 Description and location of part. Reference to the plans listed in table of contents will help identify parts required.

Supplying of complete details as listed will prevent unnecessary delays in filling orders.

Page 17

de:

Page 18

16-SPEED HEADSTOCK

Parts List

No.	Part	Quan.	No .	Part	Quan.
- H - 1	Headstock	1	H 63	#6 Fafnir Locknut & Washer	3
H 2	Spindle	1	H 64	Inter. Shaft Bearing Spacer	1
H 3	Spindle Nose Nut	a 16 🛫	H 65	Drive Shaft Gear	1
H 4	Spindle Bearing Cover Front	1.	H 66	Timken Bearing #368-362A	•••• 1
H 5	Gasket - Front Sp. Bearing Cover	- 분기	H 67	Drive Shaft Retainer	•••• 1
H 6	Spindle 011 Slinger	1	H 68	Timken Bearing #3190-3120	•
H 7	Timken Bearing #592A-595	: 휴지	H 09		•••• †
HO	Miniton Bearing #590W - 579	1 1 1	H 70	3/8" x 3/4" Hey Heyd Can Screw	4
н Э н Э	1" x 3/A" Allen Headless Screw - Oval Point	ំដំ ំ	H 72	3/8" Shakeproof Washer	4
. H 11	Snindle Bearing Adjusting Collar	៍រើង	H 73	Drive Shaft	î î
H 12	Adjusting Key	2	- H 74	Sliding Gear	1
H 13	3/8" x 3/4" Allen Headless Screw - Dog Point.	3	H 75	lst Reduction Shifter Shoe	1
H 14	Spindle Bearing Nut	- 1 -	H 76	Clutch Drive Shaft Gear Spool	1
H 15	Nut Key	2	H 77	Clutch Shaft Gear Shoe	1
H 16	3/8" x 2" Allen Headless Screw - Oval Point .	2	H 78	Timken Bearing #17118-17244	· 1
H 17	Face Gear	1	H 79	Timken Bearing - Cone & Rollers #1380	• · 1
H 18	Face Gear Key - 3" X 3" X 7/8"	1	H 80	Pulley Bracket	• +
H 19		1	H 81	Double Gear Shart	••••
H 20	Spindle Silding Gear	2	H Q3	Timken Bearing - Cone & Bollers #09078
H OO	Spindle Sliding Geer Lever Fork	ĩ	H 84	#3 Fafnir Locknut & Washer	íí
H 23	OIL Pump Cam	51 8	H 85	Clutch Shaft
H 24	Pump Cam Key - 5/16" x 5/16" x 1"	2	H 86	Cork Gasket	1
H 25	Timken Bearing #394A-399A	2	H 87	Timken Bearing #387-382A	1
H 26	Spindle Bearing Sleeve - Rear	· 1	H 88	Inter. Shaft Bearing Spacer	1
H 27	Spindle Oil Slinger - Rear	1.	H 89	Bearing Spacer - Short	· 1
H 28	Spindle Bearing Cover - Rear	1	Н 90	Bearing Retainer Plate
H 29	Spindle Bearing Spacer - Rear	1	H 91	#3-L-11 New Departure Ball Bearing .
H 30		24 T	H 92	Bearing Spacer - Long
H 31	Spindle Gear Nut	11 A	H 95	Pulley Locknut	•••••
и 32 и 32	5/16" - 5/9" Allen Socket Hd. Can Sonews	11	, п 94	579 Sprocket
H 34	1" T 1 Allen Hdls. Set Screw - Flat Point	1	H 96	Sprocket Key = 3/8" x 3/8" x 2"	iiii i
H 35	2-3/8" Welch Plug	1	H 97	Clutch Plate	1
H 36	Oil Basin Covers	2	H 98	Clutch Disc	1
H 37	Wool Felt Strainer - Front	is, 1 ≡ y,	Н 99	Clutch Disc - Toggle Carrier	1
H 38	Wool Felt Strainer - Rear	1	-н 100	O Clutch Lining	2
H 39	5/16" x 5" Allen Socket Hd. Cap Screws	11	- н 10	1 Tubular Rivets	12
H 40	Center Collet	1	H 102	2 Clutch Release Springs	• ·
H 41	Center - Std. #4 Morse	1	H 100	5 Drill Rod Pin - 1/8" x 1-1/8"
H 42		2	H 104	4 TOggio
	T I 5/6" ALLEH SOCKED Hu. Cap Screw	า จั เ	H 10	6 Clutch Spool
H 45	1" x 3/4" Allen Socket Ed. Cap Screw	4	H 10	7 Clutch Fork	î
H 46	Inter, Shaft Bearing Housing Cover	1	H 108	8 Clutch Shoe
H 47	ALLPAX Packing	5 y 1 h 1	H 10	9 Clutch Shoe Pins - 2" x 12" Drill Rod	2
H 48	Inter. Shaft Bearing Housing Screw	1	H 11	0 Abutment Collar	1,
H 49	Inter. Shaft Bearing Housing	1	H 11	1 R-140 Norma-Hoffman Bearing	1
H 50	#306 Fafnir Ball Bearing	1 .	. – н ш	2 Bearing Retainer Ring	1
H 51	Back Gear Stop Collar	1.	H 11:	3 Pulley Outboard Bracket	•••• 1
H 52	Back Gear Pinion	1	H 114	E Clutch Adjusting Nut	100 1
H 53	Back Gear Pinion Fork	1	H 11	6 Clutch Spool Asy = 1/4" X 3/8" X 1-9/.	10. • • 2
H 54	TRUS Farnir Ball Bearing	1	1 110	7 Pulley Sheft Cover	• 1
H 55	#y Farnir Locknut and Washer	1	H 110	3 H x 5/8" Allen Headless Screw - Dog 1	Point 1
H 67	Intermediate Sheft	ĩ	H 110	9 5/16" x #" Allen Socket Head Can Sore	7.
H 58	Inter, Shaft Double Gear Bushing - Plain	. î	H 120	O Spindle Face Gr. Lock Washer	1
H 59	Inter. Shaft Double Gear Bushing - Flanged .	1	H 12:	1 1 x 11 Allen Socket Head Cap Screw	13
H 60	Inter. Shaft Double Gear	1	H 122	2 3/8" x 7/8" C. R. Pin	1
H 61	3/16" x = C. R. Pin	1	H 123	3 3/8" x 1/2" Allen Hdls. Screw - Dog Po	oint 2
H 62	#206 Fafnir Ball Bearing	1		알 물건을 했는 것이 같아.

Page 19

.......................................

Page 20

16-SPEED HEADSTOCK

Parts List


H 124 H 125 H 126 H 127 H 128 H 129 H 130 H 131 H 132 H 133 H 134 H 135 H 135 H 136 H 137 H 138 H 137 H 138 H 137 H 138 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 137 H 138 H 136 H 136 H 136 H 136 H 135 H 136 H 136 H 135 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 136 H 146 H 146 H 146 H 146 H 146 H 146 H 146 H 146 H 156 H 156 H 156 H 156 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166 H 166	Head Cover Spindle Sliding Gear Lever Gear Shifter (Pulley) Small Face Plate - 11" Diameter Large Face Plate - 16" Diameter Pulley Clutch Fork Lever Locating Block "A" Lever Locating Block "C" Back Gear Hand Lever Back Gear Shifter Cam Back Gear Shifter Lever Clutch Shaft Sliding Gear Lever Spindle Sliding Gear Lever Spindle Sliding Gear Lever Inter. Shaft Sliding Gear Lever Inter. Shaft Sliding Gear Lever Shifter Hand Lever Shifter Hand Lever Inter. Shaft Sliding Gear Fork Oil Pump Bracket Shifter Hand Lever Late Gear Shifter Shaft Back Gear Shifter Shaft Back Gear Shifter Shaft Back Gear Shifter Shaft Shifter Hand Lever Shifter Gear Lever Shaft Back Gear Shifter Shaft Back Gear Shifter Shaft Derating Lever Lock Plunger Shifter Lever Collar Drive Shaft Retainer Screw Gear Shaft Lever Link Screw Oil Window Seat Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shifter Lever Collar Shift			H 177 H 178 H 179 H 180 H 181 H 182 H 183 H 184 H 185 H 185 H 185 H 185 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 187 H 188 H 186 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 199 H 198 S 200 H H 199 H H 199 H H 199 H H 199 H H 199 H H 198 H H 199 H H 199 H H 198 H H 199 H H 198 H H 199 H H 198 H H 199 H H 198 H H 199 H H 198 H H 199 H H 198 H 198 H H 197 H 198 H	3/8" x 2" Allen Hdls. Screw - Oval Point 1" x 1/2" Allen Hdls. Screw - Oval Point 3/4" x 5/8" Allen Hdls. Screw - Cup Point 3/8" Thin Hex. Nut 3/8" Std. Hex. Nut 3/4"-10 Special Hex. Nut 5/16" x 1" Allen Hdls. Screw - Dog Point #4 x 1-3/4" Taper Pin 5/2" Taper Pin 5 x 2-5/8" Taper Pin 3/8" x 2" Taper Pin 3/8" x 2" Taper Pin 3/8" x 2" C. R. Pin 3/8" x 2" C. R. Pin 3/8" x 1" C. R. Pin 3/4" x 2-1/8" Drill Rod Pin 3/16" x 3/16" x 14" Round End Key 3/16" x 3/16" x 14" Round End Key 3/16" x 3/16" x 14" Round End Key 3/16" x 3/16" x 14" Round End Key 3/16" x 3/16" x 14" Bound End Key 3/16" x 3/16" x 14" Diameter Head Cover Gasket 011 Window 1-1/8" Welch Plug Model 824 Cinn. Handle Spring Lock Plunger Spring 011 Window Gasket 011 Window Gasket 011 Window Gasket 011 Window Adapter 5/32" Compression Bushing 5/32" Compression Sleeve 5/32" Elbow Adapter Junction - 3-Way Drip Plug FJB5E2500 5/32" Compression Nut #1 Bowen Oiler 14" Sole" Plug 4" Shakeproof Lock Washer #4 x 5/16" Parker Drive Screws #4 x 3/8" Reducing Bushing -/a" 3/8" Reducing Bushing -/a" 3/8" Reducing Bushing
H 165 H 166	a" x 14" Allen Socket Hd. Cap Sc. 5/8" x 1-3/4" Allen Socket Hd. Ca	rew	8	H 217 H 218	5/32" x 9" Tubing	1
H 167	5/8" x 2" Allen Socket Hd. Cap So	orew	2	H 219	5/32" x 16 ¹ / ₂ " Tubing	i
H 168 H 169 H 170 H 171 H 172 H 173 H 174 H 175 H 176	7/16" x 1-3/4" Allen Socket Hd. 7/16" x 1-3/4" Allen Socket Hd. 1" x 5/8" French Hd. Screw 3/8" x 3/8" Allen Headless Screw 1" x 1" Allen Socket Head Cap Scr 3/8" x 3/8" Allen Hdls. Screw - Cup 5/16" x 5/16" Allen Hdls. Screw - Cup 5/16" x 1-1/2" Allen Hdls. Screw - 3/8" x 1-1/2" Allen Hdls. Screw	- Dog Point rew Dval Point Dog Point Oval Point	1 3 3 6 4 1 3 3 1	H 220 H 221 H 222 H 223 H 223 H 224 H 225 H 226 H 227 H 229	Speed Plate Caution Plate ALLPAX Packing - 3/8" Coil Form 3/8" x 1" Close W. I. Nipple 3/8" x 18-1/8" W. I. Nipple 3/8"- 90° M. I. Elbow 3/8" Allen Pipe Plug 0il Pump Bracket Gasket	24" 1 2 1 1

21 a

Page 21

Page 22

END FEEDWORKS ASSEMBLY

Parts List

Quan.

EW 1 EW 2 EW 3 EW 4 EW 5 EW 6 EW 7 EW 8 EW 7 EW 8 EW 9 EW 10	Top Housing Top Housing Cover Housing . Housing Cover End Sweep Clutch Shifter Sweep Bearing Sliding Gear Shifter Lever - inner Sliding Gear Shifter Lever - outer Change Gear 30T			EW 56 EW 57 EW 58 EW 59 EW 60 EW 61 EW 62 EW 63	5/16" x 7/16" Allen Hdls.Scr Sl.Gr. Shift Lev inner 5/16" x 1/2" Allen Hdls. Scr Top Housing . 3/8" x 1/2" " - Plunger Plate 3/4" x 1" " - Housing . 5/16" x 5/8" " - Cl.Shifter Sh. 1/4" x 1/2" Hdls. Set Scr Bearing Nut . 3/8" x 1-3/4" Hdls. Set Scr Top Housing . 5/16" x 1/2" Hdls. Set Scr Sl. Gr. Shift Lev outer
EW 11 EW 12 EW 13 EW 14 EW 15 EW 16 EW 16 EW 17 EW 18 EW 19 EW 20 EW 21	Change Gear 70T Sweep Dumb Bell Gear Reversing Pinion Back Gear Pinion Sliding Clutch Small Clutch Gear Large Clutch Gear Dumb Bell & Rev. Pinion Shaft Clutch Shifter Shaft		1 1 1 1 1 1 1 1 1 2 1 2	EW 64 EW 65 EW 66 EW 67 EW 68 EW 69 EW 70 EW 70 EW 71 EW 72	#0 x 1/4" Farker Drive Scr. Fd. No. Plates Feed Plate #1 Feed Plate #2 3/8" Std. Hex. Nut Cl. Shifter Stop Screw 5/8" Std. Hex. Nut Sliding Clutch Shaft 5/8" Std. Hex. Nut Sweep Binder Stud 5/8" Std. Hex. Nut Inter. Ch. Gear Bolt 5/8" Std. Hex. Nut Change Gear Pinion 1/4" x 1/4" x 1-3/8" Rd. End Key Sl. Cl. Sh.& Chg. Gr. Pin. 1/4" x 1/4" x 0/16" Pd. Frd. Key Sl. Ch. Sh.
EW 22 EW 23 EW 24 EW 25 EW 26	Vertical Shaft Plunger Plate Stud Dumb Bell Gear Spacer Reverse Pinion Shaft Sleeve		1111111	EW 75 EW 75 EW 76	1/4" x 1/4" x 9/16" Rd. End Key - Vertical Sh. 1/4" x 1/4" x 1" Rd. End Key - Vertical Shaft 3/16" x 3/16" x 3/4" Rd. End Key - Back Gear Pinion 3/16" x 3/16" x 3/4" Rd. End Key - Shifter Lever Stud .
EW 27 EW 28 EW 29 EW 30 EW 31 EW 32 EW 33 EW 33 EW 35 EW 35 EW 35 EW 35 EW 35 EW 35 EW 39 EW 39 EW 40	Reverse Plate Stud Back Gear Change Gear Pinion Sliding Clutch Shaft Brg. Cover Sliding Clutch Shaft Brg. Spacer Sliding Clutch Shaft Brg. Washer Detent Plunger Plunger Plate Reverse Pinion Spacer Inter. Change Gear Washer Inter.Change Gear Bearing Shifter Lever Stud Bearing Filler Sliding Gear Shifter			EW 77 EW 78 EW 79 EW 80 EW 81 EW 82 EW 83 EW 83 EW 84 EW 85 EW 85 EW 86 EW 87 EW 88 EW 89	Tit Key - Sliding Clutch Bearing #0 x 1" Taper Pin Sl. Gear Shifter Lever HdL. 5/16" x 7/8" C. R. Pin Sweep Bearing 3/8" x 1" C. R. Pin - Housing 7/16" x 1" C. R. Pin - Top Housing 1/8" Std. Pipe Plug Dumb Bell & Rev. Pin. Sh. 1/4" Std. Pipe Plug - Housing 011 Window - Housing SC-403 Hyatt Brg. Change Cear (sweep) #205-J Fafnir Felt Seal Brg Sl. Clutch Sh. #204-J Fafnir Felt Seal Brg Sl. Clutch Sh. #5205W Fafnir Double Row Brg Sl. Clutch Sh. #204 Fafnir Single Row Brg Dumb Bell & Rev. Pinion Sh.
EW 41 EW 42 EW 43 EW 44 EW 45 EW 46	Bearing Nut Clutch Gear Spacer Bearing Spacer Sliding Gear Shifter Lever Handle Sliding Gear Shifter Lever Lock Pin		1 1 1 1	EW 90 EW 91 EW 92 EW 93	#202 Fafnir Brg Back Gear Pinion
EW 40 EW 47 EW 48 EW 49 EW 50 EW 51 EW 52 EW 53	Oil Window Frame Oil Window Screws 5/8" x 5-1/2" Allen Fil. Hd. Scr Housing 3/8" x 4" Allen Fil. Hd. Scr Housing Cov 3/8" x 3/4"" " " - Top Hsg. Co 5/16" x 3/4"" " " - Sweep Brg. 1/4" x 1/2"" " - Sl.Cl.Sh.Br		1 3 2 3 3 4	EW 94 EW 95 EW 96 EW 97 EW 98 EW 99 EW 99 EW 100	1/8" Alemite Fitting Inter. Ch. Gr. Belt & Sl. Cl. Sh. 1/8" Alemite Fitting - Top Housing #404 Gits Oiler - Housing Alemite Grease Gun Spring - Plunger Spring - Sl. Gr. Sh. Lever Lock Pin. 11/16" x 1-3/4" x 9/64" Th. Washer - Sweep
EW 54 EW 55	5/8" x 5 ¹ / ₂ " - Top Housing 5/16" Hex. Allen Scr. Wrench Housing Cov.Sc	rs.	4 3 1	EW 101	Binder Stud. 41/64" H x 1-1/2" O.D. x 3/16" Th. Washer Ch. Gr. Pin. & Sl. Cl. Shaft

No.

Part

Page 23

Page 24

FEED BOX ASSEMBLY

Parts List

F 1 Feed Box 1 F 30 Feed Bod Qitch Shifter 1 F 30 Feed Bod Qitch Shifter 1 F 31 Feed Bod Qitch Shifter 1 F 32 Feed Bod Qitch Shifter 1 F 32 Feed Bod Qitch Shifter 1 F 35 Shifting Qitch Iterer 1 F 35 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 36 Shifting Qitch Iterer 1 F 37 Shifting Qitch Iterer 1 F 37 Shifting Qitch Iterer 1 F 37 Shifting Qitch Iterer Shifting Qitch Iterer 1		Tat' C		Quan.
F 2 Feed Rod Clutch Shifter 1 F 51 Body Pit Sorew - Short F 3 Slading Clutch Housing 1 F 52 Body Pit Sorew - Long F 4 Feed Rod Clutch Housing 1 F 53 Large Clutch Gear Bushing F 5 Slading Tumbler 1 F 55 Hand Gear Shart 1 F 6 Slading Clutch Housing 1 F 55 Hand Gear Shart 1 F 7 Slading Tumbler Hale Gear Shart 1 F 56 Hand Gear Shart 1 F 10 Tumbler Hale Gear Shart 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 12 Gone Gear Shacer 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 13 Clutch Gear Galar 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 14 Clutch Gear Shacer 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 14 Clutch Gear Shact Washer 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 14 Clutch Gear Shact Washer 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 14 Clutch Gear Shact Washer 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1 F 14 Tumbler Shatt Shacer 1 F 56 S/Le ⁶ x 3/d ⁶ Allen Hale. Sorew 1	Fl	Feed Box		1	F 50	Tumbler Pinion Bushing
F 3 Sliding Clutch Housing 1 F 52 Large Clutch Gear Bunking F 4 F 63 Large Clutch Gear Bunking 1 F 53 Large Clutch Gear Bunking F 6 Sliding Clutch Lever 1 F 54 Smalle Pin Smalle Pin F 7 Shifter Rod 1 F 56 F 64 Smalle Pin Smalle Pin F 7 Shifter Rod 1 F 57 Statue Scare 1 F 7 Shifter Rod 1 F 56 F 64 Rod X. T Scare F 10 Cone Gear Nut 1 F 56 F 67 Scare Scare 1 F 12 Cone Gear Shate 1 F 56 Scare 1 F 63 Scare 1 F 13 Tumbler Planger 1 F 64 Scare 1 F 64 Scare 1 F 65 Scare 1 F 65 Scare 1 F 65 Scare 1 F 65 Scare 1 F 65 Scare 1 F 65 Scare 1 F 65 Scare 1 F 65 Scare	F 2	Feed Rod Clutch Shifter		1	F 51	Body Fit Screw - Short
P 4 Feed Rod Clutch Housing 1 F 5 Inter Transform P 5 Sliding Tumbler 1 F 5 Inter Transform P 6 Sliding Tumbler 1 F 5 F 6 Stall Clutch Gear Dualing P 7 Sliding Tumbler 1 F 5 F 7 F 7 Stall Clutch Gear Shall Clutch F 7 Stall Clutch Gear Shall Clutch F 7 Stall Clutch Gear Shall Clutch F 7 Stall Clutch Gear Shall Clutch F 7 Stall Clutch Gear Shall Clutch F 7 Stall Clutch Gear Shall Clutch F 7 Stall Clutch Gear Shall Clutch	F 3	Sliding Clutch Shifter		1	F 52	Body Fit Screw - Long
P 5 Sliding Tumbler 1 P 54 Sliding Clutch Lever P 7 Shifter Rod 1 P 55 FRI Clutch Cear Fundle Pln P 7 Shifter Rod 1 P 55 FRI Clutch Cear Shaft 1 P 7 Shifter Rod 1 P 55 FRI Clutch Cear Shaft 1 P 10 Tumbler Shift Gear Shaft 1 P 56 S'' X 1 ⁴ Allen Pil. Kd. Sor. P 11 Cone Gear Shaft 1 P 56 S'' X 1 ⁴ Allen Pil. Kd. Sor. P 13 Tumbler Plniper 1 P 56 S'' X 1 ⁴ Allen Bils. Sorew P 14 Coutch Gear Shaft Washer 1 P 56 S'' X 2 ⁴ X 1 ⁴ Allen Bils. Sorew P 14 Cutch Gear Shaft Washer 1 P 56 Y' X 1 ⁴ Allen Bils. Sorew P 16 Tumbler Shaft Sleave 1 P 56 Y' X 1 ⁴ Allen Bils. Sorew P 14 Tumbler Shaft Sleave 1 P 56 Y' X 1 ⁴ Allen Bils. Sorew P 17 Tumbler Shaft Sleave 1 P 56 Y' X 1 ⁴ Allen Bils. Sorew P 15 Tumbler Shaft Sleave 1 P 56 Y' X 1 ⁴ Allen Bils. Sorew P 10	F 4	Feed Rod Clutch Housing			F 53	Large Clutch Gear Bushing
P 6 Sliding Olution Lever 1 F 65 Feed Rod Cl. Eco. Lever Handle Pin. P 7 Shifter Rod 1 F 65 Feed Rod Cl. Roc. Lever New Feed Rod Cl. Roc. Lever P 6 Cone Gear Shaft 1 F 55 A" x 14" Allen Fil. Hd. Sor. P 10 Tumbler Gear Shaft 1 F 56 A" x 14" Allen Fil. Hd. Sor. P 11 Cone Gear Shaft 1 F 56 A" x 14" Allen Hils. Sorew P 11 Cone Gear Shaft 1 F 56 A" x 14" Allen Hils. Sorew P 13 Tumbler Shaft Macher 1 F 57 A" Allen Hils. Sorew P 14 Cone Gear Shaft Wacher 1 F 56 A" x 14" Allen Hils. Sorew P 14 Tumbler Shaft Wacher 1 F 56 A" x 14" Allen Hils. Sorew P 14 Tumbler Shaft Wacher 1 F 66 A" x 14" Allen Hils. Sorew P 14 Tumbler Shaft Wacher 1 F 66 A" x 14" Allen Hils. Sorew P 14 Tumbler Shaft Wacher 1 F 66 A" x 14" Allen Hils. Sorew P 20 Clutch Gear Shaft Wacher 1 F 76 A" x 14" Allen Hils. Sorew	F 5	Sliding Tumbler		ii i	F 54	Smell Clutch Geen Bushing
F 7 Shifter Rod 1 F 66 Feed Red Ci. Ecc. Larger F 8 Cone Gear Shaft 1 F 67 Feed Red Ci. Ecc. Larger F 9 Clutch Geer Shaft 1 F 65 F' x 1" Allen Fil. Hd. Sor. F 10 Tumbler Idler Gear Shaft 1 F 65 F' x 1" Allen Fil. Hd. Sorew F 11 Cone Gear Spacer 1 F 61 S/G" x 5/G" x 1" Allen Hdle. Sorew F 13 Tumbler Shaft Washer 1 F 65 S/G" x 2'A" Allen Hdle. Sorew F 14 Clutch Geer Collar 1 F 65 S/G" x 2'A" Allen Hdle. Sorew F 14 Tumbler Shaft Washer 1 F 65 S/G" x 2'A" Allen Hdle. Sorew F 16 Tumbler Shaft Mashing 1 F 65 S/G" x 2'A" Allen Hdle. Sorew F 14 Tumbler Shaft Masher 1 F 65 S/G" x 2'A" Allen Hdle. Sorew F 17 Tumbler Shaft Masher 1 F 65 S/G" x 2'A" Allen Hdle. Sorew F 14 Tumbler Shaft Masher 1 F 76 Y 2'A" x 2'A" C R. Fln. F 10 Tumbler Shaft Masher 1 F 73 Y 2'A" x 2'A" Tapper Pin. F 25	F 6	Sliding Clutch Lever			T 01	Ed Ed Cl Lower Handle Pin
F B Cone Gear Shaft 1 F 00 F 10 F 11	F 7	Shifter Rod			T 55	Fast Red Cl. Fast Laway
F 9 Clutch Gear Shaft 1 F 06 S ⁰ x 1 ^d Allon Fil. Hi. Soc. F 10 Tumbler Glace Gear Shaft 1 F 06 S ¹ /2 x 1 ^d Allon Hile. Sorew F 11 Cone Gear Spacer 1 F 06 S ¹ /2 x 1 ^d Allon Hile. Sorew F 12 Cone Gear Spacer 1 F 06 S ¹ /2 x 3 ^d Allon Hile. Sorew F 13 Tumbler Shaft 1 F 06 S ¹ /2 x 3 ^d Allon Hile. Sorew F 14 Clutch Geer Collar 1 F 06 S ¹ /2 x 3 ^d Allon Hile. Sorew F 16 Tumbler Shaft Washer 1 F 06 S ¹ /2 x 1 ^d Allon Hile. Sorew F 16 Tumbler Shaft Washer 1 F 06 S ¹ /2 x 1 ^d Allon Hile. Sorew F 16 Tumbler Shaft Washer 1 F 06 S ¹ /2 x 1 ^d Allon Hile. Sorew F 13 Tumbler Shaft Washer 1 F 06 S ¹ /2 x 1 ^d A ^d Allon Hile. Sorew F 20 Tumbler Shaft Washer 1 F 06 S ¹ /2 x 1 ^d A ^d Allon Hile. Sorew F 21 Tumbler Shaft Masher 1 F 06 S ¹ /2 x 1 ^d X 1 ^d Al ^d Allon Hile. Sorew F 21 Tumbler Shaft Masher 1 F 06 S ¹ /2 x 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d X 1 ^d	F 8	Cone Gear Shaft		• • +	F 50
P 10 Tumbler laler Geer Shart 1 F 05 5 / A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹ , A ¹	F 9	Clutch Gear Shaft		1	F 07
Pill Cone Gear Nut 1 75 50/16 % % Allen Hiles, Sorew Pilz Cone Gear Shaft Washer 1 760 50/16 % % 7/4 Ållen Hiles, Sorew Pild Cone Gear Shaft Washer 1 760 50/16 % % 7/4 Ållen Hiles, Sorew Pild Cone Gear Shaft Washer 1 760 50/16 % % 7/4 Ållen Hiles, Sorew Pild Clutch Gear Collar 1 760 50/16 % % 7/4 Ållen Hiles, Sorew Pild Tumbler Shaft Washer 1 765 50/16 % % 7/4 Ållen Hiles, Sorew Pild Tumbler Shaft Washer 1 765 7/4 % 7/4 % Allen Hiles, Sorew Pild Tumbler Shaft Suscer 1 767 74 % 7/4 % Allen Hiles, Sorew Pild Tumbler Shaft Masher 1 765 7/4 % 7/4 % Allen Hiles, Sorew Pild Tumbler Shaft Suscer 1 767 74 % 74 74 % 74 % 74 Pild Tumbler Shaft Suscer 1 767 74 % 74 74 % 74 % 74 74 % 74 Pild Tumbler Shaft Washer 1 773 74 % 74 % 74 74 % 74 % 74 74 % 74 % 74 74 % 74 % 74 74 % 74 % 74 74 %	F 10	Tumbler Idler Gear Shaft			F JO	Z X L ALLEH FIL, NU, SCL,
P 12 Cone Gear Spacer 1 F 60 57.65 Allen Holls. Sorew P 13 Tumbler Plunger 1 F 60 368 x 5/16 Allen Holls. Sorew P 14 Clutch Gear Shaft Washer 1 F 65 568 x 3/8 x 3/8 Allen Holls. Sorew P 16 Clutch Gear Shaft Washer 1 F 65 568 x 3/8 Allen Holls. Sorew P 16 Tumbler Shaft Washer 1 F 65 566 x 3/8 Allen Holls. Sorew P 16 Tumbler Shaft Spacer 1 F 65 566 x 3/8 Allen Holls. Sorew P 17 Tumbler Shaft Spacer 1 F 65 566 21.72 x 1/8 Lg. Copper Plug P 10 Tumbler Shaft Washer 1 F 66 7.52 N. x 1/8 Lg. Copper Plug P 21 Clutch Gear Shaft Washer 1 F 72 3/16 x 2/16 D. R. Pln P 23 Staft gusting 1 F 73 40 x 2/16 D. R. Pln P 24 Staft gusting 1 F 74 40 x 2/16 D. R. Pln	F 11	Cone Gear Nut			T CO
P 13 Tumbler Plunger 1 F 05 3/6" x 3/4" Allen Holls. Sorew P 14 Oluteh Geer Shaft Washer 1 F 65 3/6" x 3/4" Allen Holls. Sorew F 15 Oluteh Geer Shaft Washer 1 F 65 3/6" x 3/4" Allen Holls. Sorew F 16 Tumbler Shaft Shaft Washer 1 F 65 3/6" x 3/4" Allen Holls. Sorew F 16 Tumbler Shaft Washer 1 F 65 3/6" x 3/4" Allen Holls. Sorew F 18 Tumbler Shaft Washer 1 F 66 3/6" x 3/4" Allen Holls. Sorew F 18 Tumbler Shaft Washer 1 F 66 3/6" x 3/4" Allen Holls. Sorew F 20 Clutch Geer Shaft Sheere 1 F 77 3/4" x 1/6" C.R. Pin F 22 Detent 1 F 72 3/16" x 2/16" C.R. Pin F 23 Sliding Clutch Lever Stud 1 F 73 3/0" x 1/8" Enger Pin F 24 Sliding Clutch Lever Stud 1 F 74 4% x 1/3" Taper Pin F 24 Sliding Clutch Sort Kart Staper 1 F 74 4% x 1/3" Taper Pin F 25 Oli Plunger Filson 1 F 74 4% x 1/3" Taper Pin F 2	F 12	Cone Gear Spacer		• •	F OU	J/10" X J/8" Allen Hols, Screw
F 14 Clutch Gear Schaft Washer 1 F 63 5/6* Allen Hdus. Sorew F 15 Clutch Gear Schaft Washer 1 F 64 4* x allen Hdus. Sorew F 16 Tumbler Shaft Hashing 1 F 65 5/6* x 5/6* Allen Hdus. Sorew F 17 Tumbler Shaft Washer 1 F 65 5/6* x 4* Allen Hdus. Sorew F 18 Tumbler Shaft Washer 1 F 65 5/6* x 4* Allen Hdus. Sorew F 18 Tumbler Shaft Washer 1 F 65 5/7* x 4* Allen Hdus. Sorew F 14 Tumbler Shaft Washer 1 F 67 x 4* x 1.2/6* CR. Pin F 22 Olutch Gear Shaft Washer 1 F 71 x 2-1/8* CR. Pin F F 23 Silding Clutch Lever Stud 1 F 71 x 2-1/8* CR. Pin F F 24 Silding Clutch Lever Stud 1 F 77 # 2-1/8* CR. Pin F F 25 Silding Clutch Lever Stud 1 F 76 Allen Hdus. F 26	F 13			•• -	F OL	5/8" x 5/16" Allen Hals, Screw
P 15 Clutch Gear Shaft Washer 1 F 63 5/8 % Allen Hölls. Sorew P 16 Tumbler Shaft Jushing 1 F 64 % Allen Hölls. Sorew P 16 Tumbler Shaft Jushing 1 F 65 5/8 % Allen Hölls. Sorew P 16 Tumbler Shaft Jushing 1 F 65 5/8 % Allen Hölls. Sorew P 18 Tumbler Shaft Sleeve 1 F 65 5/8 % % Å % Å Å %	F 14	Clutch Gear Collar			F OZ	5/0" - 1" Allen Hals. Screw
P 16 Tumbler Shart 1 F 62 7, X X 1.1161 Holls. Sorew P 17 Tumbler Shart F Washing 1 F 66 3 ⁴ x X Trench Hd. Sore. P 16 Tumbler Shart F Washer 1 F 66 3 ⁴ x X Trench Hd. Sore. P 16 Tumbler Shart Spacer 1 F 66 3 ⁴ x X Trench Hd. Sore. P 20 Clutch Gear Shart Spacer 1 F 68 7/38" D. x 1/8" L. COpper Flug P 21 Clutch Gear Shart Spacer 1 F 70 4 ⁴ x C. R. Pin P 22 Sliding Clutch Lever Stud 1 F 72 5/16" x 2-1/8" D. R. Pin 1 P 24 Silding Clutch Lever Strad 1 F 74 4 x 1 Reper Pin P 24 Silding Clutch Lever Strad 1 F 74 4 x 1 Reper Pin P 24 Silding Clutch Lever Strad 1 F 74 4 x 1 Reper Pin P 25 Oil Plunger Histon 1 F 74 4 x 1 Reper Pin P 26 Oin Retainer 1 F 76	F 15	Clutch Gear Shaft Wesher		·•• •	F 65	5/8" X Z" Allen Hals' Screw
p if Tumbler Shaft Bashing i f 65 6/10° X 5/8° Allen Holls. Sorew F 18 Tumbler Shaft Shaft Space i f 67 f x X * Ternch Holls. Sorew F 18 Tumbler Shaft Space i f 67 f x X * Ternch Holls. Sorew F 20 Clutch Gear Shaft Masher i f 68 f 7/32° D, x 1/8° Lg. Copper Plug F 20 Clutch Gear Shaft Masher i f 69 f 7/32° D, x 1/8° Lg. Copper Plug F 21 Clutch Gear Shaft Masher i f 70 x 1/1/16° C. R. Pin F 22 Detent	F 16	Tumbler Shaft			1.04
P 16 Tumbler Shaft Washer 1 F 66 F x 37 French Hd. Sort. P 19 Tumbler Shaft Spacer 1 F 67 f x 1.3/8" Th Key. P 10 Tumbler Shaft Spacer 1 F 68 7/32" D. x 1.3/8" Th Key. P 20 Clutch Gear Shaft Spacer 1 F 68 7/32" D. x 1.3/8" C. R. Pin P 21 Clutch Gear Shaft Spacer 1 F 70 3" x 1.1/16" C. R. Pin P 22 Clutch Lever Stud 1 F 72 3/16" x 2.1/8" D. R. Pin P 24 Silding Clutch Lever Sorew 1 F 74 # X x 1.3/4" Taper Pin P 25 Cil Plunger Knob 1 F 74 # X x 1.3/4" Taper Pin P 25 Oil Plunger Maton 1 F 76 # X x 1.3/4" Taper Pin P 26 Oil Retainer. 1 F 76 # X x 1.3/4" Taper Pin P 20 Cone Gear Shaft Collar 1 F 78 # 204 Fafnir Erg. Single Row F 30 Lutch Shaft Bearing Nut 1 F 78 # 205 Fafnir Erg. Single Row F 31 Pull Pin Handle 1 F 80 # 940792-05185 Timkon Brg. F 35	ም 17	Tumbler Shaft Bushing		•••	F 65	5/16" X 5/8" Allen Hols, Screw
P 13 Tumbler Shaft Sleeves. 1 F 67 T X L-3/8" Lift Rey e.g. F 20 Olutch Gear Shaft Spacer 1 F 68 7/32" D, X 1/8" Lift Rey e.g. F 21 Olutch Gear Shaft Washer 1 F 69 1/8" X 2" C. R. Pin F 22 Detent 1 F 73 X 2 - 1/16" C. R. Pin F 23 Sliding Clutch Lever Stud 1 F 73 X 2 - 1/8" D. R. Pin F 24 Sliding Clutch Lever Stud 1 F 73 X 2 - 1/8" D. R. Pin F 24 Sliding Clutch Lever Stud 1 F 74 X 1/8" Taper Pin F 25 Oll Plunger fiston 1 F 75 #4 x 1/3" Taper Pin F 26 Oll Plunger fiston 1 F 76 #4 x 1/3" Taper Pin F 28 Oll Retainer 1 F 76 #4 x 1/3" Taper Pin F 29 Cone Gear Shaft Collar 1 F 76 #4 x 1/3" Taper Pin F 29 Cone Gear Shaft Collar 1 F 76 #2 x 1/4" Taper Pin F 30 Clutch Bearing Nut 1 F 76 #2 x 1/4" Taper Pin F 31 Full Pin Handle 1	FIR	Tumbler Shaft Washen		••	F 66	The second Hall Scr.
P 50 Olutch Gear Shaft Spacer 1 F 68 7/82 D, x 1/8 Lg. Copper Fulg F 20 Olutch Gear Shaft Spacer 1 F 68 7/82 D, x 1/8 Lg. Copper Fulg F 21 Dittch Gear Shaft Spacer 1 F 67 x 1 - 1/16 C. R. Fin F 21 Dittch Gear Shaft Spacer 1 F 71 x x 1 C. R. Fin F 22 Dittch Lever Stud 1 F 72 3/16 x 2 - 1/8 D. R. Fin F 24 Silding Clutch Lever Screw 1 F 74 # 6 x 1 2 maper Pin F 25 Oil Plunger Fiston 1 F 74 # 6 x 1 2 maper Pin F 25 Oil Plunger Fiston 1 F 76 # 4 x 1 2 maper Pin F 26 Oil Plunger 1 F 76 # 2 x 14 maper Pin F 25 Oil Retainer 1 F 76 # 2 x 14 maper Pin F 28 Oone Gear Shaft Collar 1 F 76 # 2 x 14 maper Pin F 29 Jone Gear Shaft Collar 1 F 77 # 2 x 14 maper Pin F 30 Clutch Shaft Bearing Mut 1 F 77 # 2 x 14 maper Pin F 31 Fuil Pin Inandle 1 F 80	F 19	Tumbler Shaft Sleeve			F 67	4 X 4 X 1. 5/8" Tit Mey
P 21Clutch Gear Shaft Washer1F 00 $\frac{1}{4}$ No $x = 1/16^{\circ}$ C. R. PinP 22Detert1F 71 $\frac{4}{7}$ x $\frac{1}{4}$ C. R. PinFP 23Sliding Clutch Lever Stud1F 71 $\frac{4}{7}$ x $\frac{1}{4}$ C. R. PinP 24Sliding Clutch Lever Stud1F 73 $\frac{4}{7}$ Taper PinF 25Oil Flunger Knob1F 74#6 x $\frac{1}{4}$ Taper PinF 26Oil Flunger Aston1F 74#6 x $\frac{1}{4}$ Taper PinF 27Oil Flunger Aston1F 76#4 x $1-5/4$ Taper PinF 28Oin Gear Shaft Collar1F 77#204 Fafnir Erg. Single RowF 30Clutch Shaft Bearing Nut1F 79#205 Fafnir Erg. Single RowF 31Pall Pin Handle1F 79#205 Fafnir Erg. Single RowF 31Fald Tubler Tinton1F 78#204 Fafnir Erg. Single RowF 33Sliding Tumbler Finion1F 80#94712 Hyatt Brg.F 34Sliding Tumbler Finion1F 82#1986-1932 Tinken Brg.F 35Sliding Clutch Gear1F 84#4 Fafnir Locknut & WasherF 35Sliding Clutch Gear1F 85#5 fafnir Locknut & WasherF 35Sliding Clutch Gear1F 85#5 fafnir Locknut & WasherF 36Saul Clutch Gear1F 86SpringF 40Cone Gear 28T1F 89SpringF 42Cone Gear 32T1F 93#4 x 5/16" O.D. Erass TubeF 42	F 20	Clutch Gear Shaft Spacer			F 68
P 22 Detent 1 F 70 7 x 14/16 R. Fin P 22 Sliding Clutch Lever Stud 1 F 72 3/16" x 2-1/8" D. R. Pin P 24 Sliding Clutch Lever Screw 1 F 73 4/0 x 4" Taper Pin F 25 Oil Plunger Nnob 1 F 74 #6 x 14" Taper Pin F 26 Oil Plunger Piston 1 F 74 #6 x 14" Taper Pin F 27 Oil Retainer. 1 F 76 #4 x 14" Taper Pin F 28 Oil Retainer. 1 F 76 #4 x 14" Taper Pin F 29 Cone Gear Shaft Collar 1 F 76 #4 x 14" Taper Pin F 30 Clutch Bart Bearing Nut 1 F 78 #204 Fafnir Brg. Single Row F 31 Pill Pin Handle 1 F 78 #205 Fafnir Brg. Single Row F 31 Pill Pin Handle 1 F 78 #205 Fafnir Brg. Single Row F 33 Sliding Tumbler Filnion 1 F 82 #1966-1932 Timken Brg. F 34 Sliding Tumbler Pinion 1 F 82 #1966-1932 Timken Brg. F 35 Sliding Tumbler Filnion 1	F 21	Clutch Gear Shaft Washer			F 69
P 25 Sliding Clutch Lever Stud 1 F 72 X/16" x 2-1/8" D. R. Pin F 24 Sliding Clutch Lever Screw 1 F 73 #0 x 14" Taper Pin F 25 Gil Plunger Knob 1 F 74 #6 x 14" Taper Pin F 26 Gil Plunger Knob 1 F 74 #6 x 14" Taper Pin F 26 Gil Plunger Platon 1 F 76 #4 x 1-3/4" Taper Pin F 27 Oil Retainer 1 F 76 #4 x 1-3/4" Taper Pin F 28 Oil Retainer 1 F 76 #4 x 1-3/4" Taper Pin F 29 Cone Gear Shaft Collar 1 F 76 #4 x 1-3/4" Taper Pin F 30 Clutch Shaft Bearing Nut 1 F 78 #204 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 78 #205 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 81 #06079-05185 Timken Brg. F 32 Fped Rod Clutch Gear 1 F 83 #07098-07204 Timken Brg. F 34 Sliding Tumbler Idler Gear 1 F 84 #1 Fafnir Locknut & Washer F 33 Sliding Clutch Gear 1 F	F 22	Detent	, .	•••	F 70
F 24 Sliding Olutch Lever Sorew 1 F 72 5/16 K 2=1/6 D. K 2=1/6 D. K 11 F 25 Oil Plunger Knob 1 F 74 K 2 Taper Pin F 26 Oil Plunger Piston 1 F 74 K 2 Taper Pin F 26 Oil Plunger Piston 1 F 74 K 4 X 12 Taper Pin F 27 Oil Retainer 1 F 76 # 4 X 12 Taper Pin F 28 Oil Retainer 1 F 77 # 204 Fainir Brg. Single Row F 30 Clutch Shaft Bearing Nut 1 F 77 # 204 Fainir Brg. Single Row F 31 Pull Pin Handle 1 F 77 # 204 Fainir Brg. Single Row F 33 Sliding Tumbler Pinion 1 F 82 # 1086-1932 Timken Brg. F 34 Sliding Clutch Gear 1 F 85 # 607090-05185 Timken Brg. F 35 Sliding Clutch Gear 1 F 84 # 4 Feinir Lockmut & Washer F 35 Sliding Clutch Gear 1 F 85 # 50716 0.D. Brass Tube Var	F 23	Sliding Clutch Lever Stud		••	F 71
P 25 011 Plunger Knob 1 F 75 # 6 x 1 ⁴ / ₂ Taper Pln F 26 011 Plunger Knob 1 F 75 # 4 x 1 ⁴ / ₂ Taper Pln F 26 011 Plunger Liston 1 F 76 # 4 x 1 ⁴ / ₂ Taper Pln F 27 011 Plunger 1 F 76 # 4 x 1 ⁴ / ₂ Taper Pln F 28 011 Plunger 1 F 76 # 4 x 1 ⁴ / ₂ Taper Pln F 29 Cone Gear Shaft Collar 1 F 77 # 2 x 1 ⁴ / ₂ Taper Pln F 30 Clutch Shaft Bearing Nut 1 F 78 #204 Fafnir Brg. Single Row F 31 Pull Pln Handle 1 F 78 #205 Fafnir Brg. Single Row F 31 Pull Pln Handle 1 F 80 #04712 Hyatt Brg. F 34 Sliding Tumbler Plnion 1 F 80 #05070-07204 Timken Brg. F 33 Sliding Clutch Gear 1 F 83 #07098-07204 Timken Brg. F 35 Sliding Clutch Gear 1 F 86 #100 Look 04 Washer F 34 Sliding Clutch Gear 1 F 86 Spring - F 35 Sliding Clutch Gear 1	F 24	Sliding Clutch Lever Screw		•
F 26 011 Plunger Platon 1 F 75 #4 x 14 Taper Pln F 27 011 Plunger 1 F 76 #4 x 1-3/4" Taper Pln F 28 011 Retainer 1 F 77 #2 x 14" Taper Pln F 28 011 Retainer 1 F 77 #2 x 14" Taper Pln F 30 Clutch Shaft Bearing Nut 1 F 77 #2 x 14" Taper Pln F 31 Pull Pin Handle 1 F 78 #204 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 79 #205 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 79 #205 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 78 #204 Fafnir Brg. Single Row F 32 Stiding Tumbler Pinion 1 F 84 #405079-05185 Timken Brg. F 33 Sliding Tumbler Filler Gear 1 F 84 #4 Fafnir Locknut & Washer F 35 Sliding Clutch Gear 1 F 84 #4 Fafnir Locknut & Washer F 35 Soring 1 F 86 Spring Var F 36 Con	F 25	011 Plunger Knob	* •	•••	F 70
F 27 011 Plunger 1 F 76 ## X 12 Haper Pin F 28 011 Retxiner 1 F 76 ## X 12 Laper Pin F 28 011 Retxiner 1 F 76 ## 2 x 14" Taper Pin F 29 Cone Gear Shaft Collar 1 F 78 #204 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 78 #204 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 80 #94712 Hyatt Brg. F 33 Sliding Tumbler Pinion 1 F 82 #1986-1932 Timken Brg. F 35 Sliding Tumbler Idler Gear 1 F 83 #07098-07204 Timken Brg. F 34 Stading Tumbler Idler Gear 1 F 84 #4 Fafnir Locknut & Washer F 36 Shiding Clutch Gear 1 F 86 Spring F 36 Cone Gear 26T 1 F 86 Spring F 30 Cone Gear 28T 1 F 86 Spring F 40 Cone Gear 36T 1 F 93 5/16" o.D. Brass Tube Var F 42 Cone Gear 36T 1 F 93 5/16" o.D. Brass Tube	F 26	011 Plunger Piston	•		10 17 E
F 28 011 Retainer 1 F 70 #2 x 14 ^o Tapper Pin F 29 Cone Gear Shaft Collar 1 F 77 #2 x 14 ^o Tapper Pin F 30 Clutch Shaft Bearing Nut 1 F 78 #204 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 78 #205 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 80 #94712 Hyatt Brg. F 33 Sliding Tumbler Finion 1 F 81 #05079-05185 Timken Brg. F 34 Sliding Tumbler Teller Gear 1 F 83 #07098-07204 Timken Brg. F 34 Sliding Clutch Gear 1 F 83 #07098-07204 Timken Brg. F 35 Sliding Clutch Gear 1 F 84 #4 Fafnir Locknut & Washer F 35 Cone Gear 24T 1 F 86 Spring F 35 Cone Gear 26T 1 F 89 Spring F 40 Cone Gear 32T 1 F 89 Spring Var F 42 Cone Gear 36T 1 F 91 4 ⁿ Gits Wicking Var F 42 Cone Gear 36T 1 F 93 Yar x 5/16 ⁿ	F 27	011 Plunger		•••	F 70	#4 x 1 3 / 4 menon Pin
F 29 Cone Gear Shaft Collar 1 F 76 #204 Fafnir Brg. Single Row F 30 Clutch Shaft Bearing Nut 1 F 78 #205 Fafnir Brg. Single Row F 31 Pull Pin Handle 1 F 80 #94712 Hyatt Brg. F 32 Feed Rod Clutch Ecc. 1 F 80 #94712 Hyatt Brg. F 33 Sliding Tumbler Pinion 1 F 82 #1986-1932 Timken Brg. F 34 Sliding Tumbler Idler Gear 1 F 83 #07098-07204 Timken Brg. F 35 Sliding Tumbler Gear 1 F 84 #4 Fafnir Locknut & Washer F 36 Small Clutch Gear 1 F 86 Spring F 36 Cone Gear 24T 1 F 86 Spring F 30 Cone Gear 24T 1 F 90 $/16" O.D. Brass Tube Var F 41 Cone Gear 32T 1 F 90 $/16" O.D. Brass Tube Var F 42 Cone Gear 36T 1 F 93 #4 x 5/16" Parker Dr. Scrs. 1 F 42 Cone Gear 40T 1 F 94 #102 Gias Oiler - Fd. Rod Cl. Housing 1 F 44 Cone Gear	F 28	0il Retainer			E 70	#9 r 111 monon Din
F 30 Clutch Shaft Bearing Nut 1 F 70 #205 Fainir Brg. Single Now F 31 Pull Pin Handle 1 F 79 #205 Fainir Brg. Single Row F 32 Feed Rod Clutch Ecc. 1 F 81 #05079-05185 Timken Brg. F 33 Sliding Tumbler Pinion 1 F 82 #1986-1932 Timken Brg. F 34 Sliding Tumbler Idler Gear 1 F 83 #07098-07204 Timken Brg. F 34 Sliding Clutch Gear 1 F 84 #4 Fainir Locknut & Washer F F 36 Small Clutch Gear 1 F 85 #5 Fainir Locknut & Washer F F 36 Cone Gear 26T 1 F 86 Spring F 40 Cone Gear 28T 1 F 86 Spring F 41 Cone Gear 36T 1 F 88 Spring F 42 Cone Gear 36T 1 F 86 Spring F<	F 29	Cone Gear Shaft Collar	••••••		F 70	#ON Howing Day Single Day
F 31 Pull Pin Handle 1 F 75 #043 Failling Trighter Row F 32 Feed Rod Clutch Ecc. 1 F 80 #94712 Hyatt Brg. 1 F 33 Sliding Tumbler Pinion 1 F 82 #1986-1932 Timken Brg. 1 F 34 Sliding Tumbler Idler Gear 1 F 82 #1986-07204 Timken Brg. 1 F 35 Sliding Clutch Gear 1 F 84 #4 Fafnir Locknut & Washer 1 F 35 Sliding Clutch Gear 1 F 85 #5 Fafnir Locknut & Washer 1 F 36 Cone Gear 247 1 F 87 Spring - - F 30 Cone Gear 267 1 F 88 Spring - - F 40 Cone Gear 267 1 F 89 S/16" 0.D. Brass Tube Var F 41 Cone Gear 367 1 F 90 S/16" 0.D. Brass Tube Var F 42 Cone Gear 407 1 F 92 #1702 Gits Wicking Var F 42 Cone Gear 447 1 F 93 #4 x 5/16" Parker Dr. Sors 1 F 44 Cone Gear 467 1	F 30	Clutch Shaft Bearing Nut		* • ·	F 70	#204 Faintr Drg. Single Row
F 32 Feed Rod Clutch Ecc. 1 F 30 Hydrt Bygt Byg	F 31	Pull Pin Handle		•	F 79	#205 Fainir Drg. Single now
F 35 Sliding Tumbler Pinion 1 F 82 #1986-1932 Timken Brg. F 34 Sliding Tumbler Idler Gear 1 F 83 #07098-07204 Timken Brg. F 35 Sliding Clutch Gear 1 F 84 #4 Fafnir Locknut & Washer F 35 Sliding Clutch Gear 1 F 84 #4 Fafnir Locknut & Washer F 36 Small Clutch Gear 1 F 85 #5 Fafnir Locknut & Washer F 37 Large Clutch Gear 1 F 87 Spring F F 40 Cone Gear 24T 1 F 87 Spring F F 40 Cone Gear 26T 1 F 88 Spring F F 41 Cone Gear 32T 1 F 90 3/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 91 4" Gits Wicking Var F 43 Cone Gear 46T 1 F 92 #1702 Gits 0il Cage Var F 44 Cone Gear 46T 1 F 93 #4 x 5/16" Parker Dr. Sers 1 F 44 Cone Gear 46T 1 F 94 Bushing - Pull Pin F F 45 <	F 32	Feed Rod Clutch Ecc			F OU
F 34 Sliding Tumbler Idler Gear 1 F 32 #19302-1932 FImken Brg. F 35 Sliding Clutch Gear 1 F 83 #07098-07204 Fimken Brg. F 36 Small Clutch Gear 1 F 84 #4 Fafnir Locknut & Washer F 36 Small Clutch Gear 1 F 85 #5 Fafnir Locknut & Washer F 37 Large Clutch Gear 1 F 86 Spring F 38 Cone Gear 24T 1 F 87 Spring F 40 Cone Gear 28T 1 F 88 Spring Var F 42 Cone Gear 36T 1 F 90 3/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 91 4" Gits Wicking Var F 43 Cone Gear 40T 1 F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 44T 1 F 93 #4 x 5/16" Parker Dr. Sors. 1 I F 45 Cone Gear 46T 1 F 94 Bushing - Pull Pin	F 33	Sliding Tumbler Pinion	•	•• -	F OL	#JOPG JOZO Edultan Drg
F 35Sliding Clutch Gear1F 85#07090-07204 Timmen Brg.F 36Small Clutch Gear1F 84#4 Fafnir Locknut & WasherF 37Large Clutch Gear1F 85#5 Fafnir Locknut & WasherF 38Cone Gear 24T1F 86SpringF 39Cone Gear 26T1F 88SpringF 40Cone Gear 32T1F 88SpringF 41Cone Gear 36T1F 903/16" O.D. Brass TubeVarF 42Cone Gear 36T1F 914" Gits WickingVarF 43Cone Gear 40T1F 92#1702 Gits 0il GageVarF 44Cone Gear 46T1F 93#4 x 5/16" Parker Dr. Scrs.1F 45Cone Gear 46T1F 95#302 Gits 0iler - Fd. Rod Cl. Housing1F 46Cone Gear 48T1F 96#2C Bowen 0iler - Fd. Box & Fd.Box Cl. Hsg.1F 480il Reservoir Cover1F 98Sliding Gear Index Plate - Feed Box1F 49Sliding Gear (See 930-4141)1F 98Sliding Gear Index Plate - Feed Box5	F 34	Sliding Tumbler Idler Geen		•••	F OS	#1900-1902 Timken Drg.
F 36Small Clutch GearIF 34#4 Fainif Locknut & WasherF 37Large Clutch GearIF 85#5 Fafnir Locknut & WasherF 38Cone Gear 24TIF 86SpringF 39Cone Gear 26TIF 88SpringF 40Cone Gear 28TIF 895/16" O.D. Brass TubeF 41Cone Gear 32TIF 903/16" O.D. Brass TubeF 42Cone Gear 36TIF 91½" Gits WickingF 43Cone Gear 40TIF 92#1702 Gits Oil GageF 44Cone Gear 44TIF 93#4 x 5/16" Parker Dr. Scrs.F 45Cone Gear 48TIF 94Bushing - Pull PinF 46Cone Gear 48TIF 95#302 Gits Oiler - Fd. Rod Cl. HousingF 47Lead Screw ClutchIF 96#2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg.F 48Oil Reservoir CoverIF 98Sliding Gear Index Plate - Feed BoxF 49Sliding Gear (See 930-4141)IF 98Sliding Gear Index Plate - Feed Box	F 35	Sliding Clutch Gear			F OJ
F 33 Large Clutch Gear 1 F 35 #5 Fainif Decknut & Washer F 33 Cone Gear 24T 1 F 86 Spring F 39 Cone Gear 26T 1 F 88 Spring F 40 Cone Gear 28T 1 F 89 5/16" O.D. Brass Tube Var F 41 Cone Gear 32T 1 F 90 3/16" O.D. Brass Tube Var F 42 Cone Gear 36T 1 F 90 3/16" O.D. Brass Tube Var F 43 Cone Gear 40T 1 F 91 4" Gits Wicking Var F 44 Cone Gear 46T 1 F 93 #4 x 5/16" Parker Dr. Scrs. 1 F 44 Cone Gear 48T 1 F 94 Bushing - Pull Pin 1 F 45 Cone Gear 48T 1 F 94 Bushing - Pull Pin 1 F 46 Cone Gear 48T 1 F 96 #302 Gits 0iler - Fd. Box & Fd.Box Cl. Housing 1 F 48 0il Reservoir Cover 1 F 96 #302 Gits 0iler - Fd. Box & Fd.Box Cl. Hsg. 1 F 49 Sliding Gear (See 930-4141) 1 F 98 Sliding Gear Index Plate	F 36	Small Clutch Gean		• • ·	F 04
F 38 Cone Gear 24T 1 F 86 Spring F 39 Cone Gear 26T 1 F 87 Spring F 40 Cone Gear 28T 1 F 89 Spring F 41 Cone Gear 32T 1 F 89 Spring F 42 Cone Gear 36T 1 F 90 3/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 91 4" Gits Wicking Var F 43 Cone Gear 40T 1 F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 46T 1 F 93 #4 x 5/16" Parker Dr. Scrs. 1 F 44 Cone Gear 46T 1 F 94 Bushing - Pull Pin Var F 45 Cone Gear 46T 1 F 94 Bushing - Fd. Rod Cl. Housing I F 46 Cone Gear 48T 1 F 94 Bushing - Fd. Rod Cl. Housing I F 47 Lead Screw Clutch 1 F 96 #2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg. F 48 0il Reservoir Cover 1 F 98 Sliding Gear Index Plate - Feed Box F 49 Sliding Gear (See 930-414	F 37	Large Clutch Gear		• •	F OO	#5 Fainir Locknut & Washer • • 2
F 39 Cone Gear 26T 1 F 87 Spring F 40 Cone Gear 28T 1 F 88 Spring F 41 Cone Gear 32T 1 F 89 5/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 90 3/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 91 4" Gits Wicking Var F 43 Cone Gear 40T 1 F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 44T 1 F 93 #4 x 5/16" Parker Dr. Scrs. 1 F 45 Cone Gear 48T 1 F 94 Bushing - Pull Pin 1 F 46 Cone Gear 48T 1 F 95 #302 Gits 0iler - Fd. Rod Cl. Housing 1 F 47 Lead Screw Clutch 1 F 96 #2C Bowen 0iler - Fd. Box & Fd.Box Cl. Hsg. 1 F 48 0il Reservoir Cover 1 F 98 Sliding Gear Index Plate - Feed Box 1 F 98 Sliding Gear (See 930-4141) 1 F 98 Sliding Gear Index Plate - Feed Box 1	F 38	Cone Gear 249		•• -	F OO	Spring
F 40 Cone Gear 28T 1 F 36 Spring Var F 41 Cone Gear 32T 1 F 89 5/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 90 3/16" 0.D. Brass Tube Var F 42 Cone Gear 36T 1 F 91 4" Gits Wicking Var F 43 Cone Gear 40T 1 F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 44T 1 F 93 #4 x 5/16" Parker Dr. Scrs. I F 45 Cone Gear 46T 1 F 94 Bushing - Pull Pin I F 46 Cone Gear 48T 1 F 95 #302 Gits 0iler - Fd. Rod Cl. Housing I F 47 Lead Screw Clutch 1 F 96 #2C Bowen 0iler - Fd. Box & Fd.Box Cl. Hsg. I F 48 Oil Reservoir Cover 1 F 97 Feed Index Plate - Feed Box I F 49 Sliding Gear (See 930-4141). 1 F 98 Sliding Gear Index Plate - Feed Box I F 99 Oil Instruction Plate - Feed Box I F 99 Oil Instruction Plate - Feed Box I	F 39	Cope Gear 26T	•	••	100
F 41 Cone Gear 32T I F 89 5/16" 0.D. Brass Tube Var F 42 Cone Gear 36T I F 90 3/16" 0.D. Brass Tube Var F 42 Cone Gear 36T I F 91 4" Gits Wicking Var F 43 Cone Gear 40T I F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 44T I F 93 #4 x 5/16" Parker Dr. Scrs. I F 45 Cone Gear 46T I F 94 Bushing - Pull Pin I F 45 Cone Gear 48T I F 95 #302 Gits 0iler - Fd. Rod Cl. Housing I F 47 Lead Screw Clutch I F 96 #2C Bowen 0iler - Fd. Box & Fd.Box Cl. Hsg. I F 48 0il Reservoir Cover I F 97 Feed Index Plate - Feed Box I F 49 Sliding Gear (See 930-4141) I F 98 Sliding Gear Index Plate - Feed Box I F 99 0il Instruction Plate - Feed Box F 99 0il Instruction Plate - Feed Box I	F 40	Cone Gear 28T	•	••	F OO	F/16ll O.D. Dunger White
F 42 Cone Gear 36T I F 90 5/16" 0.D. Brass Tube Var F 42 Cone Gear 36T I F 91 4" Gits Wicking Var F 43 Cone Gear 40T I F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 44T I F 93 #4 x 5/16" Parker Dr. Sers. I F 45 Cone Gear 46T I F 94 Bushing - Pull Pin I F 46 Cone Gear 48T I F 95 #302 Gits 0iler - Fd. Rod Cl. Housing I F 47 Lead Screw Clutch I F 96 #2C Bowen 0iler - Fd. Box & Fd.Box Cl. Hsg. Hsg. F 48 0il Reservoir Cover I F 97 Feed Index Plate - Feed Box F 49 Sliding Gear (See 930-4141) I F 98 Sliding Gear Index Plate - Feed Box	F 41	Cone Gear 32		°∙•	F 69	Z/16W O.D. Brass Tube
F 43 Cone Gear 40T 1 F 91 F Gits Wicking Var F 43 Cone Gear 40T 1 F 92 #1702 Gits 0il Gage Var F 44 Cone Gear 44T 1 F 93 #4 x 5/16" Parker Dr. Sers. 1 F 45 Cone Gear 46T 1 F 94 Bushing - Pull Pin 1 F 46 Cone Gear 48T 1 F 95 #302 Gits 0iler - Fd. Rod Cl. Housing 1 F 47 Lead Screw Clutch 1 F 96 #2C Bowen 0iler - Fd. Box & Fd.Box Cl. Hsg. 1 F 48 0il Reservoir Cover 1 F 97 Feed Index Plate - Feed Box 1 F 49 Sliding Gear (See 930-4141) 1 F 98 Sliding Gear Index Plate - Feed Box F 99 0il Instruction Plate - Feed Box 1 F 99 0il Instruction Plate - Feed Box	F 42	Cone Gear 36T	•	• • 1	F 90	11 ofte Western
F 44Cone Gear 44T1F 92 #1702 Gits Oil GageF 45Cone Gear 46T1F 93 #4 x 5/16" Parker Dr. Scrs.F 45Cone Gear 48T1F 94 Bushing - Pull PinF 46Cone Gear 48T1F 95 #302 Gits Oiler - Fd. Rod Cl. HousingF 47Lead Screw Clutch1F 96 #2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg.F 48Oil Reservoir Cover1F 97 Feed Index Plate - Feed BoxF 49Sliding Gear (See 930-4141)1F 98 Sliding Gear Index Plate - Feed BoxF 99Oil Instruction Plate - Feed Box	F 43	Cone Gean AOT		• •	F. AT	T Gits wicking Various
F 45Cone Gear 46T1F 93#4 x 5/16" Parker Dr. Sers.F 45Cone Gear 46T1F 94Bushing - Pull PinF 46Cone Gear 48T1F 95#302 Gits Oiler - Fd. Rod Cl. HousingF 47Lead Screw Clutch1F 96#2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg.F 48Oil Reservoir Cover1F 97Feed Index Plate - Feed BoxF 49Sliding Gear (See 930-4141).1F 98Sliding Gear Index Plate - Feed BoxF 99Oil Instruction Plate - Feed Box	F 44	Cone Gear 44T		•••	F 92
F 46 Cone Gear 48T 1 F 94 Busning - Full Pin F 46 Cone Gear 48T 1 F 95 #302 Gits Oiler - Fd. Rod Cl. Housing F 47 Lead Screw Clutch 1 F 96 #2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg. F 48 Oil Reservoir Cover 1 F 97 Feed Index Plate - Feed Box F 49 Sliding Gear (See 930-4141). 1 F 98 Sliding Gear Index Plate - Feed Box F 99 Oil Instruction Plate - Feed Box 1 F 99 Oil Instruction Plate - Feed Box	F 45	Cone Gear 46T		• • 1	F 93	#4 X 5/16" Parker Dr. Scrs. 10
F 47 Lead Screw Clutch 1 F 95 #302 Gits Oller - Fd. Rod Cl. Housing F 48 0il Reservoir Cover 1 F 96 #2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg. F 49 Sliding Gear (See 930-4141). 1 F 98 Sliding Gear Index Plate - Feed Box F 99 0il Instruction Plate - Feed Box 1 F 98 Sliding Gear Index Plate - Feed Box	F 46	Cone Gear 48T	•	•• 1	F 94	Jushing - Full Fin
F 48 0il Reservoir Cover 1 F 96 #2C Bowen Oiler - Fd. Box & Fd.Box Cl. Hsg. F 48 0il Reservoir Cover 1 F 97 Feed Index Plate - Feed Box F 49 Sliding Gear (See 930-4141). 1 F 98 Sliding Gear Index Plate - Feed Box F 99 0il Instruction Plate - Feed Box 6	F 47	Lead Screw Clutch	•	••• +	F 95	#BUZ GITS ULLER - Fa. Roa CL. Housing
F 49 Sliding Gear (See 930-4141).	F 48	Oil Reservoir Cover	•	•• 1	F 96	#20 Bowen Uller - Fd. Box & Fd. Box Cl. Hsg 2
F 98 Sliding Gear Index Plate - Feed Box	F 49	Sliding Geer (See 030-4141)	·	•	F. A.	reed index fiate - feed Box
F 99 OIL Instruction Plate - Feed Box	~			•••	F. 98	Sil Tratavation Distance - Feed Box
	8				т. АА	Oil instruction Plate - Feed Box 1

24 •

BT -

Page 25

Page 26

Drawing #930-4143A

BED

Parts List

No.	Part	Quan.
B 1 B 2 B 3 B 4 B 5 B 7 B 8 B 13 B 13 B 15 B 16 B 17 B 18 B 19 B 20 B 21 B 22 B 23 B 25 B 28	Bed Lead Screw Bracket - Tail End Lead Screw Bracket - Head End Lead Screw Feed Rod Feed Rod Clutch Collar Lead Screw Thrust Washer Lead Screw Thrust Washer Lead Screw Thrust Washer Lead Screw Thrust Washer Lead Screw Gear Rack Pin Rack Rack Rack Feed Rod Bushing Feed Rod Clutch Bushing 3/8" x 1 ¹ / ₂ " Allen Fil. Hd. Cap Screw - Rack 3/8" x ¹ / ₂ " Allen Hdls. Set Screw Dog Pt Lead	1 1111112211***2 1
B 29 B 30 B 33 B 35 B 37 B 40 B 43 B 44 B 45 B 46 B 47 B 48	Screw Gear 3/8" x 3/8" Allen Hdls. Set Scr. Dog Pt Feed Rod Clutch Collar 1/8" x 3/8" C.R. Pin - Lead Screw Bracket 1" x 1" x 2" Round End Key - Feed Rod 1" x 1" x 11" Center Tit Key - Lead Screw Gear 4" x 11" Center Tit Key - Lead Screw Gear 42 Bowen Oiler - Lead Screw Bracket #6 Fafnir Lock Nut & Washer - Lead Screw #204J Fafnir Ball Bearing - Lead Screw Lead Screw Bushing - Tail End Lead Screw Bushing - Head End 1" x 11" Allen Fil.Hd.Cap Scr Lead Scr.Brkts. 1" x 12" Threaded Taper Pin with Nut- Lead Scr.	1 2 1 1 8 1 2 2
B 49 B 50 B 51 B 52 B 53 B 53 B 54	#7 x 2 ¹ / ₄ " Threaded Taper Pin with Nut- Lead Scr. Brackets Bed Cover Plate #10-24 x ¹ / ₄ " Button Head Screw - Bed Cover Plate #4 x 2" Taper Pin - Feed Rod Clutch Collar 3/16" x 3/8" C. R. Pin - Lead Screw 5/32" x 11/16" C. R. Pin - Lead Scr.Thr.Washer	2 2 1 2 1 1 1

* Quantity varies. Give bed length when ordering.

Page 27

Page 28

930-4144 APRON ASSEMBLY

Parts List

110.	rart		Quan.
- A 7	Apron		٦ ٨	51 Deals Distance Const
A 2	011 Pan			51 Rack Pinion Gear
- A 3	Hand Lever Bracket			52 Gear Bushing
Δ Δ	Hand Lover Bracket Cover		Z A	53 011 Window Frame
1 5	Each Red Presidet		Z A	54 Fafnir Lock Nut
AG	Pool Rou Drackets		Z A	55 Bevel Gear
AD	Rack Finion Drg. Cap - Outer		A A	56 Cross Feed Clutch Gear - plain
A 7	ack Pinion Brg. Cap - inner		1 A.	57 Long. Feed Clutch Gear
AO	Cr. Fu. CL. Sn. Brg. Retainer		1 A	58 Cross Feed Clutch Gear - splined
A 9	Pump Lever		l A	59 011 Window Screws - 1/4" x 1/2" French Hd. 3 A 101 5/16" x 1/0" C P Inter Antawneet
A 10			2 A	60 7/16" x 3/4" Allen Fil. Scr. Hand Lev. Bracket 8 A 102 1/4" x 5/8" C. R. Pin - Apron
ALL	Bevel Gear Shart Cap	en an e state e	1 A	61 1/2" x 1" " " Feed Rod Bracket 4 A 103 3490-3420 Timken Brack Pipeler Shares
A 12	Reverse Lever		1 A (	62 5/16" x 1" " "Hand Lev. Br. Cov. 4 A 104 2689-2631 Timber Brg Reak Finiton Shert.
A 13	Reverse Crank & Shart	െ രിയാം പെ	l A (	63 5/16" x 3/4" " " Rack Pinion Brg. A 105 #207K For Inter Ball Brg Rack Pinion Shart.
A 14	Bevel Pinion Shifter R. H.		1	Cap - inner - 4 A 106 #2056 Fainin Ball Brg Devel Gear Shart -
A 15	Bevel Pinion Shifter L. H.	e e se se e se e e	1. A (	64 5/16" x 1" " " Bey Gr Shaft Cap 3 A 107 #2056 Failer Ball Brg. = Long. Fd. Cl. Shaft.
A 16	Open & Shut Nut Cam Lever		, 1 A 6	65 5/16" x 1" " " 011 Pan 2 A 107 #2056 Fainir Ball Brg Bevel Gear Shaft .
A 17	Open & Shut Nut Cam	e e se se sére a se	1 Å (	66 5/16" x 24" " " Oil Pan
A. 18	Open & Shut Nut		1 A 6	67 5/16" x 3/4" " " Rack Pinion Brg. A 100 ## 20015 Matthe Moller Brg Fd. Cl. Shaft.
A 19	Handwheel Bushing		1	Cap = outer
A 20	Cross Feed Clutch Disc		1 A 6	68 3/8" x 7/8" " Cr. Ed. Cl. Sh. A 112 #5 Farmin Locknut & Washer - Rack Pin. Shaft.
A 21	Long. Feed Clutch Disc - inner		1	Brg. Betainer - 2 A 112 #5 Fainir Locknut & Washer - Bevel Gr. Shaft.
A 22	Long. Feed Clutch Disc - outer	• •	l A e	69 1/4" x 5/8" " Oil Pump
A 23	Hand Wheel.		1 A 7	70 #10-24 x 1/2" Flat Hd. Cap Sor, Feed Sh. Brg.
A 24	Rack Pinion			Retainer 6 A 115 #5 Fainir Lock Washer - Long. Fd. Cl. Shaft
A 25	Bevel Pinion		1 A 7	71 1/2" x 3/4" Allen Hdls, Scr. Handwheel Babg. ]
A 26	Bevel Gear Shaft		1 A 7	72 5/16" x 5/8" " Camshaft Bushing ] A 117 7 Way Tweether The Bijur #B-3481
A 27	Long. Feed Clutch Shaft		1 ° A 7	73 3/8" x 1 ¹ / ₁ " Gib
A 28	Cross Feed Clutch Shaft		1 A.7	74 3/8" x 1/2" " " Clutch Adi, Nut. 2 A 110 3/32" x 010 Wall x 19-1/2" Copper Tubing
A 29	Clutch Lever		2 A 7	75 5/16" x 1/2" " " Open & Shut Nut
A 30	Clutch Lever Shaft		2	Cam Lever
A 31	Yoke Shaft		2 A 7	76 1/4" x 1/2" " Open & Shut Mit A 121 Cork Washer = Apron = Bijur #A-4115
A 32	Bevel Pinion Shifter Rod		1	Cam - A 122 5/52 Compression Busning Oil Tubing -
A 33	Toggle Abutment		2 A 7	77 5/16" x 1/2" " " Reverse Lever . ] A 123 5/30" Commendan Slow All #B-1371 .
A 34	Pump Cam		1 A 7	78 3/8" x 3/4" " " Handwheel
A 35	Feed Shaft Brg.Retainer		2 A 7	79 Caution Plate - Apron
A 36	Spacer		1 A 8	80 3/8" x 1-1/2" C.R. Pin - Pump Lever
A 37	Spacer		2 A 8	81 7/16" x 2-1/2" C.R. Pin - Apron to Carriage
A 38	Spacer		1 A 8	82 5/16" x 7/8" C.R. Pin - Feed Rod Brackets 4 A 126 Drin Plan MTC #5 #D 2200
A 39	Handwheel Pinion Washer		1 A 8	83 3/8" x 13/16" D.R. Pin - Clutch Yoke
A 40	Handwheel Pinion		1 a A 8	84 1/4" x 1" D.R. Pin - Toggle Carrier
A 41	Toggle		4 A 8	85 5/16" x 7/8" D.R. Pin - Apron
A 42	Clutch Adjusting Nut		2 A 8	86 1/2" x 1-3/4" D.R. Pin - Open & Shut Nut
A 43	Clutch Shifter Spool		2 A 8	87 1/2" x 1-3/8" D.R. Pin - Rev. Crank Shaft
A 44	Toggle Carrier		2 Å 8	88 1/4" x 1/2" C.R. Pin - Feed Clutch
A 45	Open & Shut Nut Cam Shaft		1 A 8	89 1/8" x 3/16" C.R. Pin - Handwheel Pinion
A 46	G1D	te é a la séa a l	1 A 9	90 #2 x 1-1/2" Taper Pin - Clutch Yoke
A 47	Open & Shut Nut Cam Shaft Bushi	ng	1 A 9	91 #4 x 1-1/2" Taper Pin - Bevel Pinion Shifter
A 48	Reverse Lever Handle		1	R. H. A 136 O'LUGON DINES - FOOD CULTON - IZ903-A
A 49	Reverse Lever Lock Pin	and a second area	1 A 9	92 #4 x 1-1/2" Taper Pin - Bev. Pin. Sh. L.H.
A 50	Clutch Shifter Shoe		4 A 9	93 #0 x 1" Taper Pin - Reverse Lever Handle
	- K			A 139 #4 x 5/16" Perkon Drive Same Could a Distance
				A LOU WE A OVID FARMER DELVE SCIPS. = CAUCION PLACE

Page 29

Page 30

CARRIAGE ASSEMBLY

Parts List

NO.	Part		Quan.
No C 1 2 3 4 5 6 7 8 1 12 2 <	Carriage . Cross Feed Screw Bushing . Cross Feed Screw Thrust Bracket . Carriage Clamp . Carriage Wiper Plate . Carriage Wiper Plate . Carriage Wiper Plate . Bed Flat Wiper Plate - Right . Bed Flat Wiper Plate - Left . Flat Bearing Gib . Front Carriage Gib Plate . Gib Adjusting Screw . 2" x 14" Allen Fil.Ed.Scr.Front Carriage Git Cross Feed Screw Pinion Shaft . Mod.#727 Cinn.Ball Crank, Cross Feed Screw . 3/4"-16 SAE Dble.Chamfer Check Nut,Fd.Scr.St 3/4"-16 SAE Single " Cross Feed Screw Dial . Cross Feed Screw Dial . Cross Feed Screw Dial Thumb Screw . 4" x 1/16" Copper Plug Cr.Fd.Screw Dial . Pinion Shaft Sleeve . 1/8" x 1/16" Copper Plug, Finion Shaft Sleeve . 3/8" x 5/8" Hdls.Set Scr.Pinion Shaft Sleeve . 3/8" x 1/16" Copper Plug, Finion Shaft Sleeve . 1/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/8" x 1" Rd. End Key, Stop . 3/8" x 1/8" x 1" Rd. End Key, Stop . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug, Cr.Fd.Scr.Bushing . 3/8" x 1/16" Copper Plug . 3/8" x 1/16" Copper Plug . 3/8" x 1/16" Copper Plug . 3/8" x 1/16" Copper Plug . 3/8" x 1/16" Copper Plug . 3/8" x 1/16" Copper . 3/8" x 1/16" Coppe		Quan.	14 7/16" x 15 Cross F 16 3/8" x 17 9/32" x 18 12" 0.D 19 Cr.Fd.S 10 Cross F 12 #2 x 12 13 7/16" x 14 3/8" x 15 #3 Bowes 16 Carriag 17 Bijur 3 18 Clamp S 19 Cross F 10 #2 x 12 12 #2 x 12 13 7/16" x 14 3/8" x 15 #3 Bowes 16 Carriag 17 Bijur 3 18 Clamp S 19 Apron t 19 Apron t 10 1/2" x 17 Bed "V" 18 Bed "V" 16 Bed Fla 17 Junction 18 Junction 19 5/32" C 31 3/32" C 33 3/32" C
-C 42 C 43	Compensating Nut Wedge 7/16" x 12" Allen Fil.Hd.Scr.Compensating Nu	ut.	1 1	94 5/32" T 95 Stop Sc 96 5/32" 0
				70 57.52" []


С	44	7/16" x 1" Allen Fil.Hd.Scr.Compensating Nut .	1
č	45	Cross Feed Screw Dirt Shield	-
ž	16	3/01 - 3/01 Allon Udla Son Dist Shiold	1
0	40	o/o" x o/o" Allen Huis-Scr., Dirt Shield	÷
C	41	9/32" x 1/8" Copper Plug, Dirt Shield
С	48	1g" 0.D. 3/4" I.D. x 3/16" Felt, Dirt Shield .
×C	49	Cr.Fd.Screw Thrust Bearing Nut	1
C	50	#N-1804 Fafnir Bearings, Cross Feed Screw	2
24	51	Cross Feed Screw Thrust Bearing Seat Nut	-
ä	E0.	HO r 11th Manon Din Ground Road Canor	-
Š	20		-
G	53	7/16" X 17" C.R. Pin Cr.Fd.Scr. Thrust Bracket .	4
С	54	3/8" x 3/8" Allen Hdls.Scr.Cr.Fd.Scr.Thr.Brkt.	-
С	55	#3 Bowen Oiler Thrust Bracket
C	56	Carriage Gib Stud	ŧ
C	57	Bijur 3-way Junction	-
č	58	Clown Sonew	-
ä	50	Annon to Complete Canon	1
	29	Apron to carriage, Screw	1
С	60	1/2" x 12" Hex Hd.Screw Thrust Bracket	2
С	70	t"-20 x to" French Hd.Scr.Wiper Plates ]	12
С	71 -	5/16" Allen Hdls.Scr.Front Carriage Gib	4
C	72	1/2" Hex Jam Nuts, Hardened	2
Ċ	73	#4 x 5/16" Parker Drive Screws	5
ā	74	Red "W" Oil Felt (round)	Ę
č	75	Bod Bull Winon	1
ă
U	70	Bed Flat wiper	ł
C	77	Junction, 6-way Double	-
С	78	Junction, 5-way	Ĵ
C	79	5/32" Compression Bushing	Ĩ
C	80	5/32" Compression Sleeve	8
č	81	3/32" Compression Bushing
č	82	3/39" Compression Nut	$
ä	02	7/701 Compression Gleane	( \| 1
C	00		Ļţ
С	84	3/32" Straight Adapter	4
С	85	3/32" Drive Bushing	ļ
С	86	3/32" Elbow Adapter	2
C	87	1/8" Std. Pipe Plug. Carriage	1
č	88	Thread Indicator Instruction Plate	F
2	80	Annon Ail Plate	1
ä	00
U a	90	Special Dijur Fitting	1
C	9T	Drip Plug M.J.CUU-B3364	ľ
C	92	Drip Plug M.J.A00-B2629	2
С	93	3/32" Tubing Variou	21
С	94	5/32" Tubing Variou	1
Ċ	95	Stop Screw Plug
č	96	5/32" Compression Nut	ę
~	~~		- 4

Page 31

Page 32

COMPOUND REST ASSEMBLY

Parts List

Part

No.

Quan.


CR	1	Bottom Slide
CR	2	Mon Slide
an	27
GR	3
CR	4	Bottom Slide Gib
CR	5	Chip Guard
CR	6	Ton Slide Screw Nut
0D	N
UR	7	Top Silde Gear Scua Busning
CR	8
CR	9	Swivel Slide Stud
CR	10	Ton Slide Dial Bushing
(D)	11
dn	10
GR	12	Top Slide Dial Thumb Screw
CR	13	Top Slide Diel
CR	14	Top Slide Thrust Screw
CR	15	Ton Slide Geer Stud
(TD	16
OR	TO	TOP STIGE NUC DOWEL
CR	Τ.	Swivel Bolt
CR	18	Top Slide Gear
CR	19	Top Slide Gear Stud
CR	20	3/8"-16 x 1" Allen Socket Hd. Can Ser. Top
VIL	~ ~	Clide Com Stud Bushing
an	01
CR	21	5/16"-18 x 5/4" Allen Socket Hd. Cap Scr. Top
		Slide Screw Nut
CR	22	3/8" Spec. Fil. Hd. Scr. Chip Guard 2
CR	23	5/16" Spece Gib Scr. Bottom Slide & Swivel
OIC	20

CR	24	5/8"-11 x 1" Allen Hdls. Scr. Bottom Slide 1
CR	25	1/2"-20 Spec. SAE Nut Swivel Bolt 2
CR	26	9/16"-18 SAE Single Chamfer Check Nut Top
-	~~	glide Geor Stud
an	077	1 OF OG ANT Check Nut Man Alda Manuet Sanar 1
UR	21	1/2 -20 SAE CHECK NUL TOP STILL THRUSE SCREW . 1
CR	28	#2 x 1" Taper Pin Top Slide Gear Stud Bushing 2
CR	29	9/16"-18 SAE Dbl. Chamfer Check Nut Top
17		Slide Gear Stud
CR	30	#0 Bowen Oilen Ton Slide Gean Stud Bughing ]
OIL	71
UR	51	#2 Bowen Uller Top Slide
CR	32	#3 Bowen Uller Bottom Slide and Chip Guard . 2
CR	33	5/16" x 1/2" Allen Hdls. Set Scr.Bottom Slide. 1
CR	34	#3 Woodruff Key Top Slide Screw and Gear Stud. 3
CR	35	Wesher Ton Slide Screw
OR	20	Wabitor Toh Dirde Dorow
UR	20	#2 X 1-1/8" Taper Pin Top Slide Gear 2
CR	37	1/4" Dia. x 3/8" Lg. Copper Plug Top Slide
		Dial
CR	-38	7/32" x 1/4" Copper Plug Bottom Slide 2
(D)	30	#9 x 1/All Danken Dnive San Man Glide Oil
UR	09	How The Larver DLING BOL! TOD BILD OIL
-
CR	40	Mod. 766 Cinn. Compound Rest Handle 1
CR	41	J. H. Williams Finished Wrench #605 1
CR	42	5/16"-18 x 3/4" Allen Hdls. Scr. Stud Bushing, 1
CD	13	Mon Slide Ail Plate
OR	40	TOD DITAG ATT LIARD
CR	44	5/16"-18 X 7/8" Allen Hals. Scr. & Swivel
		Slide

Page 33

Page 34

TAILSTOCK ASSEMBLY

Parts List

No.	Part			Quan.
T 1	Tailstock Top	•		. 1
TZ	Talistock Base	•	•
TO		•		• 1
T 4	5/8" - 11 x 4" Set Over Screw			• 2
T 5	Spindle (English)			·
T 6	Std. #4 Morse Taper Center		•	• 1
T 7	3/8" x 3/8" x 1-3/4" Tit Key	•		. 1
т 8	Binder Handle	•	8 8 TA	. 1
т 9	Binder Screw			. 1
T 10	Binder (in 2 pieces)			. 1
T 11	3/8" Bowen Oilers			. 2
T 12	Screw			. 1
т 13	7/8" Std. Hex. Nut			2
T 14	Clamp Stud Washer			2
m 15	7/8" x 8" Std. Coupling Bolt Hex.	Heed		2
T 16	3/8" x 1" Allen Hole Set Screw	noau
	Spindle Nut	•		• 2
1 17	End Duching	•	•	• 1
		•		• 1
T 19	#9 WOOdrull Key	•		* - \
T 20	Box Type Wrench	•	• * •	· ·
T 21	5/8"-18 SAE Jamb Nut			• 1
T 22	Handwheel & Handle	* * •	•	. 1
T 23	5/16" x 1/2" Allen Cone Pt. Screw			. 1

Page 35

Page 36

Drawing #930-4167 THREAD INDICATOR

Parts List

No. Part Quan. TI 1 Stand . • Ξ. Indicator Gear ... TI 2 ٠ . . • . • 1 • . • TI 3 Dial Shaft . • TI 4 Indicator Dial . . 1 • • . . ٠ • ٠ • = • Shoulder Screw . TI 5 ī • TI 5 Shoulder Screw TI 6 Washer TI 7 #2 x 1-3/4" Taper Pin - Indicator Dial TI 8 #2 x 1-1/4" Taper Pin - Indicator Gear TI 9 #0 Bowen Oiler (style "C") - Stand • . ī 1 1

Page 37

Page 38

STEADY REST

Parts List

No	Pont
NO .	rare	uan
SR 1 SR 2 SR 3 SR 4 SR 5 SR 6 SR 7 SR 8 SR 9 SR 10 SR 10 SR 11 SR 12 SR 13 SR 14 SR 15	Steady Rest Base Steady Rest Top Shoe Stud Jaw Jaw End Plug Adj. Screw Bearing Adj. Screw Steady Rest Bolt Washer Kandknob Eye Bolt Jaw Tightener Screw 7/8" x 7-1/8" Hex.Hd.Bolt (steady rest) 5/16" x 3/8" Allen Hdls. Set Scr. (eye bolt) 5/16" x 1" Allen Hdls. Set Scr. (steady rest	11123333161311
SR 16 SR 17 SR 18	7/8" Std. Hex. Nut (steady rest bolt) 5/8" Std. Hex. Nut (eye bolt) #5 x 2-1/4" Taper Pin (steady rest top &	1 1 1
SR 19 SR 20	#3 x 1" Taper Pin (handknob) 1/2" Dia. x 3/16" Thick Copper Plug (jaw tightener scr.)	6 3
SR 21	1-3/8" Dia. x 11/16" Hole x 1/8" Thick Washer (eye bolt) .	l

Page 39

Page 40

FOLLOW REST

Parts' List

No .	Part	Quan.
FR 1 FR 2 FR 3 FR 4 FR 5 FR 5 FR 6 FR 7 FR 8 FR 9 FR 10 FR 11	Follow Rest Jaw Jaw End Plug Adj. Scr. Bearing Adjusting Screw Handknob Jaw Tightener Screw 5/8" x 2" Hex. Hd. Scr. (follow rest) #5 x 2-1/4" Taper Pin (follow rest) #3 x 1" Taper Pin (adj. scr. handknob) 1/2" Dia. x 3/16" Thick Copper Plug (jaw	12224244
FR 12	1-3/8" Dia. x 11/16" Hole x1/8" Thick Washer (follow rest)	2

Page 41

Page 42

COLLET ATTACHMENT ASSEMBLY

Parts List

No	0 .	Pa	ırt										Quan .
CA	1	Yoke					8		• •			•	2
CA	2	Yoke Lever		• •		•	• •	• •	•. •	• •		•	1
CA	3	Hand Lever		• •	• •	• •	•	• •	• •	•	•	•	1
CA	4	End Cover	•	• •		•	• •	• •	• •	• 8	•	٠	1 a
CA	5	Housing .		• •		•	• •	• •	• •		• •	٠	L
CA	6	Toggle		• •	--	• 2		• •	•	•	•	٠	и Г
CA	7	Closer Body		• •	• •	• •	•	•	• •	•	• •	٠	1
CA CA	8	COLLEC CLOS		• •	• •	-	• •	• •	• •	•		.	า้
CA CA	10	Spool		• •		•		• •					1
CA	11	Toggle Carr	ier .	•••									ī
CA	12	Toggle Bear	ing .										1
ČA	13	Lock Nut .		• •									2
CA	14	Yoke Lever	Shaft	• •						•	•		1
CA	15	Sleeve										•	1
CA	16	글" x 1½" A]	len Fi	1. I	Id.S	cr.	- (	011	et C	los	er	٠	6
CA	17	3/8" x 3	Allen 1	Fil.	, Hd	. Sc	cr.	- H	ousi	ng		٠	1.
CA	18	3/8" x 1" A	llen F	11.	Hd.	Sci	? e .	- Ho	usin	g		•	2
CA	19	幸 " エ壹" A11	len Fil	• Ho	1. S	cr.	- 1	ind	Cove	r		٠	3
CA	20	5/16" x 2"	Allen .	Hals	3. S	et t	scr.		Toke	Le	ver	•	1 1
CA	ST ST	5/16" X 5/8	Allen A	n Ho	ILS.	501	5 50	er.	= ha	na .	reve	r	1
CA	22	3/011 - 111 AT	Allen .	nals	G of	90 2	ber.	91	nous	ing	٠	٠	÷
CA CA	20	5/161 - 11	Do R	LS.	Din	- 中CI			eeve	07		٠	2
CA	25	11 7 7/81 0	B. Pi	n _	Hou	sind	166.	10 0	а г т т	OT-		•	2
CA	26	III x III x 7	/8" Rd	Er	nd K	ev .	Y	ke	Leve	rSI	haft		ĩ
CA	27	· 자 ·	5/4" Rd	Er	nd K	ev .	- Ye	oke	Leve	r SI	haft		ī
ĊA	28	Bunting Bus	hing #	E 52	- 65	Hou	ısir	ıg .					ī
CA	29	1" x 3/8" I	r. Rod	Pir	1 - I	Tog	le	Car	rier				2
CA	30	H Bowen Oi	ler - 1	Hous	ing	•						• •	З
CA	31	1/8" Collet		• •		• •						•	1
CA	32	3/16" Colle	tee									•	1
CA	33	쉽 Collet				• •	•					•	- 1
CA	34	5/16" Colle	et		0 0	0.0				•		٠	1
CA	35	3/8" Collet			• •	•	•			•	•	٠	1
CA	36	7/16" Colle	t	• •	• •	• •			• •	•	• •	٠	1
CA	37	意" Collet					•			۰	• •	٠	1
CA	38	9/16" COTTO	T e e i	• •	• •	• •	•	• •		•		٠	L.
CA	39	5/8" COLLET		• •	• •	• •				•		٠	1 1
CA CA	40	3 All Collet			• •	• •			• •	•		٠	1
CA	42	13/16" Coll	et		• •	•			0 0	•		•	1
CA	43	7/8" Collet											i

Page 43

Page 44

TAPER ATTACHMENT ASSEMBLY

Parts List

N	o .	Part	Quan.
TA	1	Taper Slide	l
TA	2	Taper Bar	1
TA	3	Bed Clamp	1
TA	4		1
TA	5	Cross Feed Screw Inrust Bracket	1
TA MA	6		÷
MT.	0		- +
TA MA	0		1
ጠል	in	Tanan Slide Holding Collen	2
TA	ii	Taper Shoe Gib	1
TA	12	Taper Bar Pivot	1
TA	13	Pointer	î
ΤА	14	Taper Bar Adj. Scr. Nut	ĩ
ТА	15	Bed Clamp Stud	2
TA	16	Taper Slide Holding Rod	1
TA	17	Bed Clamp Plate	l
TA	18	Taper Bar Adj. Scr. Pivot	l
TA	19	Thrust Bracket Support Pin	2
TA	20	Taper Shoe Stud	1
TA mA	21 ZT	Taper Bar Adj. Scr. Knob	1
TA mA	22	E/Oll w 1.7/All How Hd Som Mode Decelet	1 A
ΠA	24	$3/8^{"}$ x $3/8^{"}$ Allen Hdls Son - Cn Ed Son	9 4
TU	DI	The Bracket	1
ТА	25	3/8" x 1" Allen Hdls, Scr Taper Shoe	- 1
TA	26	1" x 3/8" Flat Hd. Scr Scale	2
TA	27	3/8" Std. Hex. Check Nut Taper Shoe Gib Scr.	4
ТА	28	5/8" Std. Hex. Nut Taper Slide Holding Rod.	ī
ΤA	29	5/8" Std. Hex. Nut Taper Shoe Stud	1
TA	30	5/8" Std. Hex. Nut Taper Bar Bolt	2
TA	31	5/8" Std. Hex. Nut Taper Bar Adj.Scr. Pivot	1
TA	32	5/8" Std. Hex. Nut Bed Clamp Stud	2
'T'A	33	3/8" Std. Hex. Check Nut - Gib Screw	7
ΤA	34	3/8" x 3/4" Allen Fil. Hd. Scr Chip
ΠA	75	Guard	2
TA	36	Do A 13 nex. nu. Scr Main Bracket	2
ΨΔ	37	Scale - Tener Slide	2
ΨA	38	Spring - Pointer	1
TA	39	#2 Bowen Oiler - Cr. Ed. Son. Thm Breakst	1
TA	40	#4 x 5/16" Parker Dr. Scr 011 Plate	4
TA	41	5/16" x 1/8" Copper Plug - Cr. Fd. Scr.	-35
		Thr. Bracket	1
TA	42	#2 x 14" Taper Pin - Taper Bar Adj. Scr.
		Knob	1
TA	43	#2 x 1-3/8" Taper Pin - Taper Slide Holding
		Rod Collar .	1
TA	44	#5 x 12" Taper Pin - Main Bracket	2
TA.	45	^★ x 1-3/8" C. R. Pin - Main Bracket	2
TA	46	41/64" x 3/16" x 1출" Steel Washer - Taper
m۸	417	Bar Bolt	2
TA	47	41/04" X 3/16" X 13" Steel Washer - Taper
ΨΔ	48	Al/64" = 3/16" = 31" Steel West	1
TU	ŦŪ	TAL A U/10 X 12 STOOL Washer - Taper	-
ΤA	49	41/64" x 3/16" x 14" Steel Washin Bad	- T
		Clamp Stud	0
TA	50	21/32" x 5/32" x 1-7/8" Steel Washer -	4
		Taper Shoe	1
ТА	51	Oil Plate - Chip Guard	ī

Page 45

REMOVE PIPE PLUG AND POUR III FOR CROSS FEED SCREW THRUST BEARING HEAVY MACHINE OIL UNTIL UP TO MARK ON WINDOW IN FRONT OF FOR TAILSTOCK SCREW NUT HEADSTOCK MARKED OIL LEVEL FOR THILSTOCK SCREW BEARING FOR SPEEDS UP TO 536 RPM. USE SAE FOR SPEEDS OVER 536 RPM USE SAE FOR CLUTCH SHIFTER SHOE FOR CROSS FEED SCREW THRUST BEARING FOR CROSS FEED SCREW NUT A PLACES MARKED THUS USE S.A.E. 60 PLACES MARKED THUS USE S.A.E. 20 OILER FOR COLLET ATTACH YOKE OIL WITH COLLET IN CLOSED POSITION 1 The WHEN TAPER ATTACHMENT IS SUPPLIED USE ALEMITE SOLIDIFIED OIL OR EQUIVALENT WITH ZERK GUN FOR STOP BUSHING YOR BEARING THREAD CHASING DIAL FOR REVERSE GEAR BEARINGS. FOR CROSS FEED SCREW NUT AREEP OIL WELL FILLED TO LEVEL OF FILLER CUP FOR CHANGE GEAR BEARING FOR TOP SLIDE SCREW NUT HEADSTOCK OIL LEVEL TOR IDLER GEAR SHAFT BEARING FOR TOP SLIDE SCREW BEARING, SFILL HERE WITH OIL UNTIL UP TO OIL LEVEL MARK ON THIS WINDOW FOR BEARINGS YOKE LEVER SHAFT -t-WHEN COLLET ATTACHMENT IS SUPPLIED FOR OUTBOARD BEARING. FOR LEAD SCREW BEARING FOR FEED ROD BEARING FOR CONTROLLER ROD BEARING FOR LEAD SCR. REV. ROD BEARING. AFILL HERE WITH OIL UNTIL PIPE PLUG / UP TO OIL LEVEL MARK ON FOR DRAININ PIPE PLUG FOR DRAINING APRON RESET THIS WINDOW FROM HEAD. 4 PIPE PLUG FOR TOR LEAD SCR BRG DRAINING OIL FROM GEAR HOUSING FOR FEED ROD BRG STAR CONTROLLER ROD BEARING FOR CONTROLLER ADD BEARING FOR LEAD SCR. REV. ROD BEARING TO OIL SLIDING TUMBLER SET IT IN PLACE UNDER ARROW AND DEPRESS FUNGER OILING LATHE

AMPLE LUBRICATION IS ESSENTIAL. TO SECURE GOOD RESULTS AND PRESERVE THE BEARINGS.

Sec.

IT IS FALSE ECONOMY TO USE ANY BUT THE BEST OILS. AFTER BEING CLEANED AND SET-UP THE LATHE SHOULD BE GONE OVER AND ALL BEARINGS FLOODED WITH OIL WHILE RUMINING IDLE AT A SLOW SPEED.

DRAMM	C.H.S.	DATE 5-15-35	NAME OF PIECE OILING DIAGRAM	MITERAL	CHIA USE STREET
the Charp			UNIT	SUPERSEDES No. 13508	DEED-DEENTIGE CO. D.D.
Thic mp	B	5-16-35.	USED ON MACHINE		THEN THEN TIPE CORP.
RHCING THECKED			14-16 MODEL B SLIDING GEAR HEAD LATHE	SCALE IS = I FOOT.	WORCESTER, MASSUSA.	233

Page 46

Reed-Prentice Reed Prentice 14 & 16 sliding gear head toolroom and engine lathes Lathes

INSTRUCTION BOOK

TABLE OF CONTENTS

PRINCIPAL FEATURES OF CONSTRUCTION

GENERAL

LUBRICATION SYSTEM

PRECAUTIONS

HEADSTOCK

REMOVE THIS COVER TO ADJUST CLUTCH TO TIGHTEN LOOSEN SCREW WITHDRAW LOCK PLATE FROM NOTCH - TURN NUT ONE NOTCH REPLACE PLATE & TIGHTEN SCREW

SPINDLE

MOTOR DRIVE

CHANGE GEAR MECHANISM

APRON AND CARRIAGE

THREAD CHASING DIAL

MICROMETER CHASING STOP

TAILSTOCK

TAPER ATTACHMENT

COLLET ATTACHMENT

PARTS ORDERING INSTRUCTIONS

Parts List

END FEEDWORKS ASSEMBLY

Parts List

Quan.

FEED BOX ASSEMBLY

Parts List

Drawing #930-4143A

BED

Parts List

930-4144 APRON ASSEMBLY

COMPOUND REST ASSEMBLY

Parts List

Part

TAILSTOCK ASSEMBLY

Parts List

Drawing #930-4167 THREAD INDICATOR

STEADY REST

Parts List

FOLLOW REST

Parts' List

COLLET ATTACHMENT ASSEMBLY

Parts List

TAPER ATTACHMENT ASSEMBLY

Parts List