R5003
AC Voltage/Current
Datalogger
Instruction
Manual
www.GlobalTestSupply.com
Table of Contents
Introduction ................................................................................................ 2
Product Quality ........................................................................................... 3
Safety ......................................................................................................... 3
Features ...................................................................................................... 4
Included ...................................................................................................... 4
Specications ............................................................................................. 5
Instrument Description ............................................................................ 6-7
LCD Description ..................................................................................... 6
Meter Description .................................................................................. 7
Supplemental Display Notes ...................................................................... 8
Software Installation ................................................................................... 8
Software Operation .................................................................................... 8
Operating Instructions ........................................................................... 9-10
Power ON/OFF ...................................................................................... 9
Setup Mode ........................................................................................... 9
MAX/MIN ..........................................................................................9-10
Auto Power Off .................................................................................... 10
Battery Replacement ................................................................................ 10
Accessories and Replacement Parts ....................................................... 10
Product Care ............................................................................................ 10
Product Warranty ..................................................................................... 11
Product Disposal and Recycling .............................................................. 11
Product Support ....................................................................................... 11
Introduction
Thank you for purchasing your REED R5003 AC Voltage/Current
Datalogger. Please read the following instructions carefully before using
your instrument. By following the steps outlined in this manual your meter
will provide years of reliable service.
www.GlobalTestSupply.com
2
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
Safety
• Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
• Do not operate around explosive gas, vapour, or dust.
• Do not operate with any of the parts removed.
• Do not use if the unit looks damaged.
• Pay attention to avoid short circuits when testing a non-insulated cable.
• Never open the battery cover during measurements.
• Do not install substitute parts or make modications on the meter.
• Never replace the battery in moist areas.
• Ensure the meter is disconnected and switched off before opening the
battery cover to replace the battery.
• Do not place the instrument in high vibrating areas.
• Do not expose the meter to direct sunlight, high temperatures or high
moisture environments.
• Switch off the meter after each use.
• Remove the AAA batteries if the meter will be stored for long periods
of time.
www.GlobalTestSupply.com
3
Features
• Datalog up to 256,000 AC voltage and current measurements
• Dual input measures 2 voltage/current measurements or 1 of each
• LCD simultaneously displays time/date, current readings and
Max/Min readings
• User adjustable sample rate from 1 second to 24 hours
• High and low alarms
• Download measurements via USB interface and analyze results with
included software
• Magnetic back allows instrument and sensors to be secured rmly in a
variety of locations
• Low battery indicator and auto shut off
Included
• 2 x AC Current Clamp Sensors
• 2 x Voltage Sensors
• 4 x Large Alligator Clips
• 4 x Basic Test Probes
• USB Cable
• Software
• AC Adapter
• Batteries
www.GlobalTestSupply.com
4
Specifications
AC Voltage
Range: 10 to 600V
Accuracy: ±(2.0% rdg + 1V)
Resolution: 0.1V
AC Current
Range: 10 to 200A
Accuracy: ±(2.0% rdg + 1A)
Resolution: 0.1A
General Specifications
Channels: Dual channel, TRMS AC Voltage or Current
Display: Dual LCD
Min/Max: Yes
Datalogging Capabilities: Yes
Real-Time Clock and
Date Stamp: Yes
Selectable Sampling Rate: 1 second to 24 hours
Max Datapoints: 256,000
Auto Shut-off: Yes (after 5 minutes of inactivity)
Low Battery Indicator: Yes
Clamp Jaw Opening: 0.5" (12.7mm)
Power Supply: 4 AAA Batteries or AC Adapter
Battery Life: Sampling Time Dependent
Software OS Compatibility: Windows 7/8/10/11
Overvoltage Category: CAT. III 600V
Product Certications: CE
Operating Temperature: 0 to 122°F (0 to 50°C)
Storage Temperature: -4 to 140°F (-20 to 60°C)
Operating Humidity Range: 10 to 75%
Dimensions: 4.5 x 2.5 x 1.3" (114 x 63 x 34mm)
Weight: 8.7oz (248g)
www.GlobalTestSupply.com
5
Instrument Description
LCD Description
9 8
1
2
3
1. Recording Status Indicator
2. Recording until memory full indicator
3. Continuous Recording
4. Maximum and Minimum Indicator
5. Memory Full Indicator
6. Battery Indicator
7. Auto Power Off Indicator
8. Normal Record Mode Indicator
9. Selected Channel Indicator
7
6
54
www.GlobalTestSupply.com
continued...
6
Meter Description
1
2
9
10
6
3
4
R5003
5
1. LCD Display
2. AC Adaptor Jack
3. POWER Button
4. MAX/MIN Button
5. Channel Input Jacks
6. USB Port
7. START/STOP Button
8. Channel Selection Button
www.GlobalTestSupply.com
7
11
8
13
12
9. AC Current Clamp Jaw
10. Jaw Opening Trigger
11. Current Sensor Plug
12. Voltage Module
13. AC Voltage Probes/
Alligator Clips
14. Voltage Sensor Plug
14
7
Supplemental Display Notes
• "-LO-" appears on the display when indicating an open circuit
(i.e. probes are not in contact with source.)
• "-CH-" appears on the display when no sensor is connected to a
specic channel.
Software Installation
Note: The data logger is still running off its internal batteries when
plugged into the computer. Be sure there is sufcient battery power
before plugging the data logger into a computer or data may be lost
or corrupted.
Install the included software by placing the supplied program disc in the
PC's CD-ROM drive. If the installation program does not automatically
start, open and browse the CD-ROM drive from your computer. Double
click on the CV2 Datalogger le and follow the on-screen prompts to
install the software.
If your computer does not have a CD drive please visit
www.reedinstruments.com/software to download the latest R5003 software.
Note: The Windows Installer package should be used to properly install
the software as it automatically installs the required drivers. It is
recommended to restart your computer after installation before using
the software for the rst time.
Full specications and Operating System compatibility can be found on
the product page at www.reedinstruments.com.
If you have specic questions related to your application and/or questions
related to software setup and functionality please contact the nearest
authorized distributor or Customer Service at info@reedinstruments.com
or 1-877-849-2127.
Software Operation
The software operating guide can be found on the R5003 product page
under the resources tab at www.reedinstruments.com
www.GlobalTestSupply.com
8
Operating Instructions
Power ON/OFF
Press the POWER button to turn the meter on or off.
Setup Mode
1. Once the software has been installed, connect the R5003 to an
available USB port on your PC with the included USB cable and
power on the meter.
2. Double click the SOFTWARE icon on your desktop and the program
will load.
3. Set up the data logger for a new session (see Software Operating
Guide for details).
4. When setup is complete, the R5003 should be removed from the
USB port in order to preserve battery life.
5. Connect the voltage test leads or the current probes to the AC
source, or clamp the jaws around a single conductor for AC current
measurements from 10 to 200A.
6. Press and hold the START/STOP button for four seconds to start
recording. The REC icon will appear in the display indicating that
recording has begun.
7. Press and hold the START/STOP button for four seconds to stop
recording. The REC icon will disappear from the display.
Note: Recording cannot be paused or restarted until the previous data is
downloaded to the software and a new session is set up. Furthermore,
recording will automatically stop when the memory is full. When
continuous recording is selected (via the software), newer data will
overwrite the oldest data when the memory is full.
8. When testing is complete, remove the sensors or probes, connect
the data logger to a PC and use the supplied software to download
the data.
MAX/MIN
Press the MAX/MIN button to display the Maximum and Minimum AC
current or Voltage values recorded during the measurement process.
1. Press the MAX/MIN button once to display the maximum value.
continued...
www.GlobalTestSupply.com
9
2. Press the button again to display the minimum value.
3. Press the button a third time to resume normal operation.
Note: The meter will automatically exit MAX/MIN mode if no key is
pressed within 10 seconds.
Auto Power Off
To preserve battery life, the meter is programmed to turn itself off after 5
minutes of inactivity. The auto power off function does not apply when the
meter is datalogging.
Battery Replacement
When the low battery indicator appears on the LCD, the batteries must
be replaced.
1. Using a Phillips head screwdriver, remove the screw on the back of
the meter.
2. Remove the battery cover.
3. Replace the 4 x AAA batteries.
4. Secure the battery cover in place and tighten the screw.
Accessories and Replacement Parts
• R1110 Test Probe Set
• R1210 Alligator Clip Set
• R8888 Medium Hard Carrying Case
Don't see your part listed here? For a complete list of all accessories and
replacement parts visit your product page on www.reedinstruments.com.
Product Care
To keep your instrument in good working order we recommend the following:
• Store your product in a clean, dry place.
• Change the battery as needed.
• If your instrument isn't being used for a period of one month or longer
please remove the battery.
• Clean your product and accessories with biodegradable cleaner. Do not
spray the cleaner directly on the instrument. Use on external parts only.
www.GlobalTestSupply.com
10
Product Warranty
REED Instruments guarantees this instrument to be free of defects in
material or workmanship for a period of one (1) year from date of shipment.
During the warranty period, REED Instruments will repair or replace, at no
charge, products or parts of a product that proves to be defective because
of improper material or workmanship, under normal use and maintenance.
REED Instruments total liability is limited to repair or replacement of the
product. REED Instruments shall not be liable for damages to goods,
property, or persons due to improper use or through attempts to utilize the
instrument under conditions which exceed the designed capabilities. In
order to begin the warranty service process, please contact us by phone at
1-877-849-2127 or by email at info@reedinstruments.com to discuss the
claim and determine the appropriate steps to process the warranty.
Product Disposal and Recycling
Please follow local laws and regulations when disposing or recycling your
instrument. Your product contains electronic components and must be
disposed of separately from standard waste products.
Product Support
If you have any questions on your product, please contact your authorized
REED distributor or REED Instruments Customer Service by phone at
1-877-849-2127 or by email at info@reedinstruments.com.
Please visit www.REEDINSTRUMENTS.com for the most
up-to-date manuals, datasheets, product guides and software.
Product specifications subject to change without notice.
All rights reserved. Any unauthorized copying or reproduction of
this manual is strictly prohibited without prior written permission
from REED Instruments
www.GlobalTestSupply.com
11
TEST & MEASURE
WITH CONFIDENCE
CHECK OUT OUR LATEST PRODUCTS!
www.GlobalTestSupply.com
Loading...