Reebok REV-10101 User Manual

User Manual

Elliptical Trainer REV-10101

2

SAFETY PRECAUTIONS

Before beginning any exercise program, you should consult with your doctor. It is recommended
that you under go a complete physical examination.

Work within your recommended exercise level, do not work to exhaustion. If you feel any pain
or abnormal pains, stop your workout immediately. Consult your physician immediately.

Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
For safety, the equipment should have at least 0.5 meter off free space all around it.

Do not allow children to play on or around your Cross trainer. Keep hands away from moving
parts.

Check your cross trainer prior to exercising to ensure that all parts are assembled, and nuts,
bolts, pedals and the saddle are tightened before every use.

Always check to see that seat is securely fastened before using your cross trainer.

Always wear proper workout clothing and shoes when using your cross trainer. Do not wear
loose clothing. Do not wear shoes with high heels.

The equipment compliant to EN957 under class H.C. Suitable for domestic, home use only.
Maximum weight of user is to be 100kg. Breaking is speed independent.

IMPORTANT

Please read instructions carefully before assembling.

Please remove all the parts from the carton and identify them against the parts list to ensure you
have all the parts . If you are missing any parts please call our Technical Support Line:
0871 474 2614

Do not destroy the carton until you have assembled the cross trainer completely.

Always use the equipment as indicated. If you find any defective components whilst assembling
or checking the equipment, or if you hear any unusual noise coming from the equipment during
use, stop. Do not use the equipment until the problem has been rectified. Call the Technical
Support line on 0871 474 2614

HARDWARE PACKING LIST

ey# Description Quantity

13. CARRIAGE BOLT M10*75

4

3

14. DOMED NUT M10 4

15. ARC WASHER Φ10.5*Φ25*T1.5 4

16. ROUND HEAD BOLT M8*15

4

17. ARC WASHER Φ8.5*Φ22*T1.5 4

18. HEX HEAD BOLT M10*80

2

19. FLAT WASHER

φ10.5xφ20xT1.5 4

20. NYLON LOCKNUT M10

2

21. SLEEVE TUBE 2

24. ROUND HEAD BOLT M6*15 4

25. CARRIAGE BOLT

M6*φ8*25 4

26. SCREW

φ5*15 12

74L.. PVC CAP (L) 2

74R. PVC CAP ® 2

ALLEN WRENCH (Hex Key)L6 1

HEX WRENCH L13~17 1

ALLEN WRENCH (Hex Key)L4 1

Explode Drawing

R

L

R

L

4

5

Part List

No. PART NAME Q'TY No. PART NAME Q'TY

1 Main frame 1 41 Clip 2
2 Front stabilizer 1 42 Belt Drive Wheel 1
3 Rear Stabilizer 1 43 Flywheel 1
4 Front Post 1 44 Nylon Lock Nut M6 2
5 Left Lower Hand Rail 1 45 Adjust Screw Washer 2
6 Right Lower Hand Rail 1 46 Flat Washerφ10.5xφ25xT1.5 2
7 Left Foot Rail 1 47 Belt Adjust Screw M6x40 2
8 Right Foot Rail 1 48 Cross Crank 2
9 Left Upper Handle Bar 1 49 Screw φ4x15 8

10 Right Upper Handle Bar 1 50 Screw M6x20 4
11 Front Handle Bar 1 51 Disk 2
12 Computer 1 52 Flange Screw M8x20 2
13 Carriage Bolt M10 x 75L 4 53 Disk Cap 2
14 Domed Nut M10 4 54 Small Sleeve 4
15 Arc Washerφ10.5xφ25xT1.5 4 55 Big Sleeve 4
16 Round Head Bolt M8 x 15 4 56 Flat Stopper 2
17 Arc Washer φ8.5xφ22xT1.2 4 57 Flat Washer φ38xφ19xT2 2

17A Split Washer M8 4 58 Hex Bolt M8x25 2

18 Hex Head Bolt M10*80 2 59 Domed Nut M8 2
19 Flat Washer φ10.5xφ20xT1.5 4 60 Spacer 2

19A Flat Washer φ10.5xφ25xT1.5 2 61 Hand Pulse Sensor 2

20 Nylon Lock Nut M10 4 62 Screw M4x15 2
21 Sleeve Tube 2 63 Font Hand Grip 1
22 Domed Nut M10 2 64 Upper Hand Grip 2
23 Flat Washer φ19xφ31.8xT1.5 2 65 End Cover 2
24 Round Head Bolt M6x15 4 66 Main Cover Left 1
25 Carriage Bolt M6*φ8*25 4 67 Main Cover Right 1
26 Screw Φ5x15 12 68 Front Post Cover Left 1
27 Front End Cap with Wheel 2 69 Front Post Cover Right 1
28 Rear End Cap 2 70 Rear Cover 1
29 Middle Computer Wire 1 71 Screw φ5x15 22
30 Lower Computer Wire 1 72 U Type Nut 2
31 Hand Pulse Middle Wire 1 73 End Cap for Foot Tube 2
32 Hand Pulse Lower Wire 1 74L PVC Cap(L) 2
33 Computer Upper Wire 1 74R PVC Cap ® 2
34 Hand Pulse Upper Wire 1 75 Small Motor 2000 type 1
35 Adapter 6V 1 76 Magnet Control Cable 1
36 Foot Pad 2 77 Foot Pad Support 2