Reebok 51549 User Manual

**U.S. and Canada customers ONLY**

,IFETIME0RODUCTS¸)NCISTHESOLEDISTRIBUTOROF2EEBOK¸"ASKETBALL

SYSTEMS&ORMOREINFORMATIONVISITUSAT

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!!!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**For customers outside the U.S. or Canada, please contact the store for assistance.**

REEBOK XL ACTION GRIP®

BASKETBALL SYSTEM

MODEL #51549

ASSEMBLY INSTRUCTIONS AND OWNER’S MANUAL

Save this instruction in the event that

the manufacturer has to be contacted for

replacement parts.

9/17/2007

WARNING

Failure to comply with any of the warnings in these instructions may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also result in property damage. Please heed all warnings and cautions. To ensure your safety, do not attempt to assemble this system without reading and following all instructions carefully. Identify and inventory the parts using the Parts List.

INSTRUCTION #1030931

PARTS LIST

ID Part # Description Qty

TP 1030702 Top Pole 1 MP 1030703 Middle Pole 1 BP 1030855 Bottom Pole 1 RB 1030781 Right Backboard Bracket 1 LB 1030762 Left Backboard Bracket 1 AT 1030881 Backboard 1 AA 500096 Pole Cap 1 AB 502005 Net 1 AC 502056 Plastic Guard 1 AD 504068 Counterbalance Spring 2 AE 510025 1/2” x 21 3/4” Axle 1 AF CB01599 Base 1 AG 510022 Wheel 2 AH 510035 Base Cap 1 WS FS16400 Warning Sticker ( one Applied) 2 AI F028010 Height Sticker 1 AJ 1030666 Rim 1 AK 1030669 Short Extension Arm 2 AL 1030670 Long Extension Arm 2 AM 1030674 Pole Brace 2 AN DA03800 Rebook Pole Pad 1

Main Hardware (HD9125B)

HA 300022 1/4” Centerlock Nut 2 HB 300029 1/2” x 7 1/8” Hex Bolt 5 HC 300110 1/4” x 2 3/4” Hex Bolt 2 HD 301008 1/2” Centerlock Nut 5 HE 302005 3/8” x 7” Hex Bolt 1 HF 302008 3/8” Centerlock Nut 1 HG 302011 5/16” x 1 1/4” Carriage Bolt 2 HH 302090 5/16” Nylock Flange Nut 2 HI 500013 9/16” x .592” Poly Spacer 4 HJ 500032 1/2” x 1/8” Spacer 4 HK 500037 1/2” x 1” Poly Spacer 2 HL 800324 1/2” x 2 5/16” Metal Spacer 2

Rim Hardware (1012253)

RA 300066 5/16” Hex T-Nut 2 RK 300128 5/16” Jam Nut 2 RC 302014 5/16” Flat Washer 2 RD 302056 Rubber Washer 2 RE 302060 5/16” x 2 1/2” Tap Bolt 2 RF 1009200 4 1/2” U-Bolt 1 HH 302090 5/16” Nylock Flange Nut 4 RJ 1001137 Compression Spring 2 RI 804033 Spring Retainer Plate 1

HARDWARE IS

ACTUAL SIZE

(Unless otherwise indicated)

(Not actual size)

PARTS LIST

ID Part # Description Qty

AN A040031C Inner Channel 1 AO 1030812 Outer Tube 1 AP C050018 Channel Stop 1 AQ 1030748 Pole Bracket 1 AR C050019 Handle 1 AS C050017 Trigger 1

Action Grip® Hardware (HH01300)

GA A070044 Lock Tab 1 GB B070040 1/4-20 x 1 1/2” Screw 2 GC B080015 Trigger Spring 1 GD BW00100 #6 Flat Washer 2 GE 300027 5/16” x 1 3/4” Hex Bolt 1 GF 300031 3/8” Flat Washer 2 GH 300095 5/16” Cap Nut 1 GI 300103 #6 x 3/8” Phillips Screw 2 HF 302008 3/8” Centerlock Nut 2 GK 302053 3/8” x 4” Hex Bolt 2 GL 800239 1/2” x 3 7/16” Spacer 2

Pole Joint Hardware (1005748)

PA BS02000 1/4” x 3/4” Screw 2 PB 1004620 Self-Tapping Screw 2

Base Hardware (1006763)

BA 300066 5/16” Hex T-Nut 1 BB 300030 5/16” x 1” Hex Bolt 2 BD 300097 5/16” Nylock Nut 2 BE BB05300 5/16” x 3.65” Shldr Screw 1 RC 302014 5/16” Flat Washer 4

(Not actual size)

GCGB

(Not actual size)

SAFETY INSTRUCTIONS

Failure to follow these safety instructions may result in serious injury or property damage and will void the warranty. The owner must ensure that all players know and follow these rules for safe operation of the system. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk

of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, or operated properly. • If using a ladder during assembly, use extreme caution. Follow all warnings and cautions on the ladder carefully. • Two people are required for assembly. • Check the Base regularly for leaks. Slow leakage could cause the system to tip over unexpectedly. • Seat the pole sections properly. Failure to do so could allow the pole sections to separate during play and/or transport of the system. • Climate, corrosion, or misuse could result in system failure. • If technical assistance is required, contact the manufacturer. • Minimum operational height is 7’ 6” to the Rim. Most injuries are caused by misuse and/or failure to follow instructions. Use caution when using the system.

BEFORE BEGINNING ASSEMBLY

A. Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department.

B. TesttallBoltsbyinsertingthemintotheirrespectiveholes.Ifnecessary,carefullyscrapeawayanyexcesspowdercoatingbuildupfrominsidethe

holes. Do not scrape away all of the powder coating. Bare metal may rust. You may need to pound some Bolts into place with a hammer or mallet.

*A MINIMUM OF TWO

ADULTS ARE REQUIRED

FOR ASSEMBLY*

Tools and Materials

Required for Assembly

(Not Included)

1. Adjustable Wrench

2. 7/16” Wrenches (2)

3. 1/2” Wrenches (2)

4. 9/16” Wrenches (2)

5. 3/4” Wrenches (2)

6. Hammer or Mallet

7. 375 lbs. Sand or Water Supply

8. Tape Measure

9. Punch/Dowel or similar tool

10. Scrap Wood or Cardboard

11. Phillips Screwdriver

Top Pole:

Four holes at the top of the pole and one small hole at the bottom.

POLE SECTION IDENTIFICATION

Identify the pole sections before beginning assembly. Failure to assemble

the pole sections correctly may result in severe personal injury or property

ONCE THE POLE SECTIONS HAVE BEEN SEATED, THEY

Middle Pole:

One slot at the top of the pole, four holes in the middle and one small hole at the bottom. Warning Sticker.

damage as described on Page One.

CANNOT BE SEPARATED.

Bottom Pole: One slot at the top of the pole, two holes near the top, two holes at the bottom and a bent edge at the bottom. Shortest pole.

9/16” Wrenches

HH01300

(2)

GK (2)

(2)

1005748

(1)

GK GF

Small holes

Large holes

Tighten all Nuts

securely now.

Align the hole in the Top Pole with the slot in the Middle

Pole and slide the Top Pole over the Middle Pole.

Do not jam the poles together until instructed.

Insert a 1/4” x 3/4” Screw (PA) through the small

hole in the Top Pole and into the Middle Pole.

The Screw will spin freely once installed.

Note: There are two screw holes at the

bottom of the pole. The correct hole will

be slightly larger and slightly higher up

on the pole.

+ 10 hidden pages