Redrock Micro 8-017-0016 User manual
3
(1b) CHESTPAD/MICROMOUNT ASSEMBLY
(1a) HANDLEBAR ASSEMBLY
(2) CHESTPAD / HANDGRIP / IRIS RODS ASSEMBLY
(3) SET SCREW / DSLR BASEPLATE ASSEMBLY
1
Hand Grips Handlebar Clamp
dSLR Baseplate
4'' Handlebar
Rods
micro Finder
micro Mount
6'' Carbon
Fiber Rods
8'' Grip
Rod
micro Brace
micro Brace
Retainer
Knob
CAST REQUIRED:
NOTE: Hoodman Loupe
sold separately
http://start.redrockmicro.com
Tutorials, forums, customer support
Company:
Scene:
Pages:
of
Date:
Title:
REDROCK MICRO
DSLR Setup Guide
1
09.16.09
THE EVENT: Standard Bundle Assembly
Steps needed for Handlebar / Chest Pad Assembly
1a: Use screws to attach 4" rods to handlebar clamp.
Attach blue knob.
1b: Attach microBrace and microMount to 8" rod.
1
2
Steps needed for Hoodman Loupe / Camera Assembly
4a: Assemble Hoodman Loupe accessory (see setup guide for
hoodman assembly)
4b: Attach camera to microFinder / dSLR baseplate.
HELPFUL HINT: loosely attach camera to baseplate screw before
sliding microFinder into place. once microFinder is in place,
tighten screw on dSLR baseplate
Steps needed for microBrace / HandGrip / Iris Rod Assembly
2a: Insert 6" rods inot handlebar clamp.
2b: Slide chestpad assembly into 4" handlebar clamp
3c: Attach handgrips to the handlebar rods.
(4) HOODMAN LOUPE / CAMERA ASEMBLY
4
ASSEMBLY COMPLETED! NOW GO SHOOT!
5
Steps needed for the Set Screw / dSLR Baseplate Assembly
3a: Attach appropriate set screw for camera to baseplate
3b: Attach dSLR baseplate to the 6" rods
set screw
create the cinema experience
Loading...