Company:
Title:
Scene:
REDROCK MICRO
ultra Field Cinema Bundle DSLR SETUP GUIDE
ultra Field Cinema BASIC and DELUXE Bundles
Pages:
Date:
1
of
04.01.12
1
2x 18” Carbon
Fiber Rods
Handlebar Clamp
8” and 4”
Handlebar Rods
ultra Field Cinema BASIC Bundle Components
microMount
with spud
microBalance Plus
Hand Grips
Shoulder Pad
Rod Clamp
Shoulder Pad and Screws
B
A
C
ultra Field Cinema Additional Options
ultraCage
counter balance weights
D
COMPLETE BASIC ultra Field Cinema ASSEMBLY
Top Handle and Thumbscrew
microFollowFocus | blue
E
F
2x 6” Carbon
Fiber Rods
G
A: Attach Shoulder Pad to Rod Clamp using provided screws.
B: Insert both 18” Rods into Rod Clamp, then into ultraCage.
C: Remove blue knob from Handlebar Clamp. Attach 4” and 8” rods to
Handlebar Clamp as shown. Replace blue knob.
1
H
2
D: Add microBalance Plus to rig.
E: Add assembled Handlebar to rig.
F: Add blue Handgrips and microMount to Handlebar rods.
G: Add external monitor (not included) to microMount.
Note: when using Top Handle,
Triangle Thumb screw replaces
I
1/4-20 x 3/8” screw at top of
cage into camera.
J
ADDITIONAL OPTIONS
H: Attach Add-On Weights to microBalance Plus.
I: Attach Top Handle (see above note) and 6” Carbon Fiber Rods to top of ultraCage.
J: Attach microFollowFocus | blue to rig and microLens Gear to camera lens.
create the cinema experience
http://start.redrockmicro.com
Tutorials, forums, customer support