Redrock Micro 18-066-1105, 18-066-0007 User manual

Company:
Title:
Scene:
REDROCK MICRO DSLR 2.0 Setup Guide DSLR Captain Stubling Bundle
Pages:
Date:
1
of
12.16.09
1
9" Carbon Fiber
(CF) Rods
HANDLEBAR ASSEMBLY
CAST REQUIRED:
4" Grip
4" Handlebar
Rod
Rod
DSLR Baseplate
9" Carbon Fiber
(CF) Rods
Lens Gear
Handlebar Clamp
(2a)
set screw
(1a)
(1b)
Steps needed for the Camera / DSLR Baseplate Assembly
1
1a: Attach appropriate set screw for Camera to Baseplate. 1b: Attach Camera to DSLR Baseplate
(3a)
(3b)
(2b)
Steps needed to assemble the Handlebar CLamp:
2
2a: Attach 4" Handlebar Rod to Handlebar Clamp. 2b: Thread Handlebar Clamp Tightening Screw
Steps needed for Lens Gear / Follow Focus / Camera Assembly
4
4a: Attach Lens Gear to Camera Lens 4b: Attach Follow Focus to CF Rods 4c: Attach Camera / DSLR Baseplate Assembly to CF Rods HELPFUL HINT: Lens Gear and Follow Focus need to be aligned properly. Make sure that Gear / Follow Focus / Camera alignment is set appropriately
create the cinema experience
Steps needed for CF Rods / Grip Rods / Hand Grip Assembly:
3
3a: Insert Carbon Fiber Rods into Handlebar Clamp 3b: Attach 4” Grip Rod to CF Rod 3c: Add Handgrips to both Handlebar Rod and Rear Grip Rod
ASSEMBLY COMPLETED! NOW GO SHOOT!
5
http://start.redrockmicro.com
Tutorials, forums, customer support
(3c)(3c)
Loading...