Redpine Signals RS9113DBH OEM Installation Manual
User Manual
Version 2.0.0
July 2016
Redpine Signals, Inc.
2107 N. First Street, #680
San Jose, CA 95131.
Tel: (408) 748-3385
Fax: (408) 705-2019
Email: info@redpinesignals.com
Website: www.redpinesignals.com
Redpine Signals, Inc. Proprietary and Confidential
User Manual
Version 2.0.0
About this Document
This document describes the usage of the RS9113 n-Link® Driver for testing
transmit & receive Regulatory Performance for Wi-Fi protocols.
Disclaimer:
The information in this document pertains to information related to Redpine Signals,
Inc. products. This information is provided as a service to our customers, and may
be used for information purposes only.
Redpine assumes no liabilities or responsibilities for errors or omissions in this
document. This document may be changed at any time at Redpine’s sole discretion
without any prior notice to anyone. Redpine is not committed to updating this
document in the future.
Copyright © 2016 Redpine Signals, Inc. All rights reserved.
Redpine Signals, Inc. Proprietary and Confidential Page 2
User Manual
Version 2.0.0
Table Of Contents
1 Introduction ...................................................................................................... 4
1.1 Getting Started .................................................................................................... 4
2 WLAN Performance Test Application Usage ..................................... 6
2.1 Transmit Tests...................................................................................................... 6
2.1.1 Transmit Command .................................................................................................... 7
2.1.2 Transmit Command Description.............................................................................. 7
2.1.3 Examples........................................................................................................................ 9
2.2 Receive Tests ...................................................................................................... 10
2.2.1 Receive Command .................................................................................................... 10
2.2.2 Receive Command Description .............................................................................. 10
2.2.3 Examples...................................................................................................................... 11
3 Instructions for integration of the host module .......................... 12
3.1 Trace layout and dimensions: .................................................................... 12
3.2 Manufacturer and specifications: ............................................................. 12
4 FCC Declaration ............................................................................................. 13
Table of Figures
No table of figures entries found.
Table of Tables
Table 1: Channel Numbers and Corresponding Center Frequencies .................... 8
Table 2: Rate Flags for Transmit Tests ................................................................................ 9
Table 3: Regulatory Domain Input in Transmit Tests .................................................. 9
Redpine Signals, Inc. Proprietary and Confidential Page 3
User Manual
1 Introduction
The software provided for the RS9113 n-Link® modules is named
OneBox-Mobile. The software currently supports performance testing for
Wi-Fi
The subsequent sections explain the use of OneBox-Mobile software on
an x86 platform. Installation and operation of the driver on specific
representative processor platforms have been explained in the Appendix
sections.
1.1 Getting Started
1. Login to user “test” with password “test123”
2. Open a Terminal
3. Type command “su” and press enter key
4. Enter password “test123”
5. Connect EUT to Laptop with USB cable as shown below
Version 2.0.0
Redpine Signals, Inc. Proprietary and Confidential Page 4
User Manual
Version 2.0.0
6. Please type “dmesg” on the terminal and press enter key and
check for the below print
7. Please go to directory /work/Regulatory_test/host/releases
8. Please read section 2 for performing WLAN Test
Redpine Signals, Inc. Proprietary and Confidential Page 5
Loading...