Redpine Signals RS9110N1102, RAN49110, RAN45728, RAN48790 Users Manual
Redpine Signals, Inc
.
RS9110-N-11-02 Evaluation Board
User Guide
VVeerrssiioonn 11..4411
July’09
2107 N. First Street, #680
San Jose, CA 95131.
Tel: (408) 748-3385
Fax: (408) 705-2019
Email: info@redpinesignals.com
Website: www.redpinesignals.com
Redpine Signals, Inc. Proprietary and Confidential
RS9110
-N-11-02
Evaluation
Board
User Guide
Version 1.41
Disclaimer:
The information in this document pertains to information related to Redpine
Signals Inc. products. This information is provided as a service to our
customers, and may be used for information purposes only.
Redpine assumes no liabilities or responsibilities for errors or omissions in this
document. This document may be changed at any time at Redpine’s sole
discretion without any prior notice to anyone. Redpine is not committed to
updating these documents in the future.
Copyright 2007 Redpine Signals Inc. All rights reserved.
Redpine Signals, Inc. Proprietary and confidential Page 2
RS9110
-N-11-02
Evaluation
Board
User Guide
Version 1.41
Table of Contents
1: Introduction ......................................................................... 5
2: Wi-Fi Data Transfer Tests ..................................................... 8
2.1: Test Setup ............................................................................. 8
2.2: Evaluation Software – Windows XP ........................................ 9
2.3: Evaluation Process on Windows XP ........................................ 9
2.4: Evaluation Software – Linux................................................. 10
2.5: Evaluation Process on Linux................................................. 10
2.6: Evaluation Software – Windows CE ...................................... 10
2.7: Evaluation Process on CE ..................................................... 11
3: Connector Details ............................................................... 12
3.1: SPI/SDIO connector ............................................................ 12
3.2: GPIO Interface Header Details ............................................. 12
3.3: SD Memory Interface........................................................... 13
4: Regulatory Information...................................................... 13
4.1: Portability Of Module ........................................................... 13
4.2: Federal Communication Commission Interference Statement 14
4.3: Label Of The End Product..................................................... 15
Redpine Signals, Inc. Proprietary and confidential Page 3
RS9110
-N-11-02
Evaluation
Board
User Guide
Version 1.41
Table of Figures
Figure 1: RS9110-N-11-02 Evaluation Board Block Diagram ........................ 5
Figure 2: RS9110-N-11-02 Evaluation Board and Connectors....................... 6
Figure 3: RF Cable Connected to the RS9110-N-11-02 Evaluation Board...... 7
Figure 4: Test Setup for Throughput Measurement ...................................... 8
Redpine Signals, Inc. Proprietary and confidential Page 4
RS9110
-N-11-02
Evalua
tion
Board
1: Introduction
The RS9110-N-11-02 evaluation board provides a complete IEEE 802.11bgn
Wireless LAN evaluation platform. This basically has the RS9110-N-02
802.11bgn WLAN module mounted on it along with few other supporting
components such as 40 Mhz reference oscillator and few other passives. The
RS9110-N-11-02 is a high-performance, low-power WLAN module.
The board connects to a host processor through SDIO or SPI interfaces. It
also provides the connectivity for the WLAN module to the Vector Signal
Generator (VSG) and Vector Signal Analyzer (VSA) through a microwave
coaxial connector switch.
The RS9110-N-11-02 evaluation board facilitates you in carrying out following
tests.
• Evaluation of the end–to-end throughput performance.
• Evaluation of the Transmit and Receive performance of the radio.
Figure 1 shows the block diagram of this evaluation board.
User Guide
Version 1.41
GPIO HDR JTAG
Antenna
RS9110-N-11-02
40MHz
Osc
802.11bgn
WLAN Module
SDIO Edge
Connector
SPI Interface
SD Memory CONN
Power Probe
Microwave Coaxial
Connector with
Switch
Figure 1: RS9110-N-11-02 Evaluation Board Block Diagram
The following picture illustrates various connectors on the RS9110-N-11-02
evaluation board
Redpine Signals, Inc. Proprietary and confidential Page 5
Loading...