RedMax BCZ2500S, SGCX2600S, BCZ2500SU User Manual

OWNER/OPERATOR MANUAL

TRIMMER ATTACHMENT

6782-93190 (004)

LRT-A



The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.

WARNING

Before using our trimmers, please
read this manual carefully to
understand the proper use of your
unit.

WARNING

— LRT-A Applicable Model —

LRTZ2500 BC2601DL BCZ2500S/SU
BCX2600S RMSZ2500 SGCZ2500S
SGCX2600S PSZ2500

LRT2300* BC2300DL* BC2600DL*
NOTE: *marked models - DO NOT USE

#65 Spacer (6367-13990)

CUTTING UNIT 000000 and up

APPLICABLE SERIAL NUMBERS :

INFORMATION

This machine is equipped with an Overload Cancellation
Mechanism.

When the cutting blades have got into metal wires or those
twigs difficult to cut, the mechanism acts as a shock
absorber, and protects the drive gears and the blades from
severe reaction which could give damage to those parts.
When the blades are frequently caught by twigs, please
check the following points:

1. Size of the twigs. NEVER TRY TO CUT TWIGS
THICKER THAN 3/16” (5mm).

2. Condition of the blade edges. REPLACE THE WORN
OUT BLADES.

For the detail of the mechanism, please see below.
Thank you for choosing our product.

SAFETY FIRST

Instructions contained in warnings within this
manual marked with a symbol concern
critical points which must be taken into
consideration to prevent possible serious
bodily injury, and for this reason you are
requested to read all such instructions
carefully and follow them without fail.

■ WARNINGS IN THE MANUAL

This mark indicates instructions which must be
followed in order to prevent accidents which could
lead to serious bodily injury or death.

This mark indicates instructions which must be
followed, or it leads to mechanical failure,
breakdown, or damage.

This mark indicates hints or directions useful in the
use of the product.

NOTE

CONTENTS

1. Parts location …………………………………4

2. Specifications …………………………………4

3. Warning labels on the machine ……………5

4. For safe operation ……………………………6

5. Set up…………………………………………12

6. Operation ……………………………………13

7. Maintenance …………………………………15

8. Parts list………………………………………17

WARNING

IMPORTANT

2. Specifications

■ LRT-A

Cutting head Type···········································································Reciprocating Double blade

Tooth·········································································································28 teeth
Pitch···················································································································30
Effective cut width··························································································16 in
Angle adjust range··················90°(±45° from cutting head position aligned shaft)

Specifications are subject to change without notice.

1. Parts location

1. Blade

2. Gear case

❲4❳

If warning label peel off or become soiled and impossible to read, you should contact the dealer
from which you purchased the product to order new labels and affix them in the required
location(s).

Never modify your trimmer.
We won't warrant the machine, if you use the remodeled trimmer or you don't observe the
proper usage written in the manual.

WARNING

(1)Read owner's manual before operating this machine.
(2)Wear head, eye and ear protection.
(3) Handling this machine improperly could result in accidents

causing serious injury or death. Read this manual carefully
and practice using the trimmer until you are fully acquainted
with all operations and have learned to use it correctly.

(4)Keep hands away from cutting blades

3. Warning labels on the machine

❲5❳

IMPORTANT

❲6❳

4. For safe operation

1. Read this manual carefully until you
completely understand and follow all safety
and operating instructions.

2. Keep this manual handy so that you may refer
to it later whenever any questions arise. Also
note, if you have any questions which cannot
be answered herein, contact the dealer from
whom you purchased the product.

3. Always be sure to include this manual when
selling, lending, or otherwise transferring the
ownership of this product.

4. Never allow children or anyone unable to fully
understand the directions given in the manual
to use the machine.

■ WORKING CONDITION

1. When using the product, you should wear proper
clothing and protective equipment.

(1)Helmet
(2)Ear protectors
(3)Protection goggles or face protector
(4)Thick work gloves
(5)Non-slip-sole work boots

2. And you should carry with you.

(1)Attached tools and files
(2)Properly reserved fuel
(3)Spare blade
(4)Things to notify your working area (rope,

warning signs)
(5)Whistle (for collaboration or emergency)
(6)Hatchet or saw (for removal of obstacles)

3. Do not wear loose clothing, jewelry, short
trousers, sandals, or go barefoot. Do not wear
anything which might be caught by a moving
part of the unit. Secure hair so it is above
shoulder length.

■ WORKING CIRCUMSTANCE

1. Never start the engine inside a closed room or
building. Exhaust gases contain dangerous
carbon monoxide.

2. Never use the product,
a. when the ground is slippery or when you can’t

maintain a steady posture.

❲7❳

b. At night, at times of heavy fog, or at any other

times when your field of vision might be
limited and it would be difficult to gain a clear
view of the working area.

c. During rain storms, during lightning storms, at

times of strong or gale-force winds, or at any
other times when weather conditions might
make it unsafe to use the product.

■ WORKING PLAN

1. You should never use the product when under
the influence of alcohol, when suffering from
exhaustion or lack of sleep, when suffering from
drowsiness as a result of having taken cold
medicine or at any other time when a possibility
exists that your judgment might be impaired or
that you might not be able to operate the product
properly and in a safe manner.

2. When planning your work schedule, allow plenty
of time to rest. Limit the amount of time over
which the product is to be used continuously to
somewhere around 30~40 minutes per session,
and take 10~20 minutes of rest between work
sessions. Also try to keep the total amount of
work performed in a single day under 2 hours or
less.

1. If you don’t observe the working time, or
working manner (See ■USING THE
PRODUCT), Repetitive Stress Injury(RSI)
could occur.
If you feel discomfort, redness and swelling
of your fingers or any other part of your
body, see a doctor before getting worse.

2. To avoid noise complaints, in general,
operate product between 8a.m. and 5p.m. on
weekdays and 9a.m. to 5p.m. weekends.

Check and follow the local regulations as to sound
level and hours of operations for the product.

NOTE

4. For safe operation

WARNING