Red Lion LPAXDA- 5 Users Manual

1

G LARGE LED DISPLAY READABLE TO 70 FEET

G DUAL PROCESS SIGNAL INPUT MODULE

G ALARMS, ANALOG OUTPUT, AND COMMUNICATION

G CUSTOM UNITS LABEL WITH BACKLIGHT

G PROGRAMMABLE USER INPUTS

G PROGRAMMABLE FUNCTION KEYS

G UNIVERSAL AC/DC POWERED MODELS

G CRIMSON SOFTWARE FOR METER CONFIGURATION

G NEMA 4/IP65

GENERAL DESCRIPTION

The LPAXDA Display is a versatile display that can increase productivity by
offering the plant floor or production area a large visual display of their current
status. With the use of a units label and backlighting, the display can be tailored
to show the actual engineering unit, which further enhances the display. This
LPAXDA display accepts various analog inputs through the use of input
modules (MPAXDP) which allow the unit to adapt to most any application. The
MPAXDP Modules offer the same features as our highly successful PAXDP
Series Panel Meters. Additional plug-in option cards can add alarms, analog
output, and communication/bus capabilities, making the LPAXDA a truly
Intelligent Panel Meter.

SAFETY SUMMARY

All safety regulations, local codes and instructions that appear in this and
corresponding literature, or on equipment, must be observed to ensure personal
safety and to prevent damage to either the instrument or equipment connected
to it. If equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.

The protective conductor terminal is bonded to conductive
parts of the equipment for safety purposes and must be
connected to an external protective earthing system.

SPECIFICATIONS

Additional specifications, wiring, programming, and information for the
individual MPAX models are contained in the corresponding standard PAX
literature. This PAX literature is shipped with the ordered MPAX model.

1. DISPLAY: 1.5" (38 mm) Red LED
5-Digit: (-19999 to 99999)

2. POWER REQUIREMENTS:
AC Modules: 85 to 250 VAC, 50/60 Hz, 21 VA
DC Modules: 18 to 36 VDC, 13 W or 24 VAC ±10%, 50/60 Hz, 16 VA

3. INPUT: Accepts analog input modules, see “Selecting your display
components.”

4. ANNUNCIATORS:
LPAXDA00: A, B, C, SP1, SP2, SP3, and SP4
Optional units label with backlight

5. KEYPAD: Five tactile membrane switches integrated into the front panel

6. CERTIFICATIONS AND COMPLIANCES:
UL Recognized Component, File #E179259, UL3101-1, CSA 22.2 No. 1010-1

Recognized to US and Canadian requirements under the Component
Recognition Program of Underwriters Laboratories, Inc.

UL Listed, File # E137808, UL508, CSA C22.2 No. 14-M95

LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards
Type 4 Enclosure rating (Face only), UL50
IECEE CB Scheme Test Certificate #UL/8843/UL

CB Scheme Test Report #04ME11209-20041018

Issued by Underwriters Laboratories, Inc.

IEC 1010-1, EN 61010-1: Safety requirements for electrical equipment for

measurement, control, and laboratory use, Part 1.

IP65 Enclosure rating (Face only), IEC 529

ELECTROMAGNETIC COMPATIBILITY

EMC specifications determined by the MPAX module.

MODEL LPAXDA- 5 DIGIT LARGE PAX DISPLAY FOR DUAL ANALOG INPUTS

DIMENSIONS In inches (mm)

CAUTION: Read complete

instructions prior to installation

and operation of the unit.

CAUTION: Risk of electric shock.

PANEL CUT-OUT

Bulletin No. LPAXDA-X

Drawing No. LP0602

Effective 1/05

Tel [phone]

Fax [phone]

www.redlion.net

C

US LISTED

U

L

R

IND. CONT. EQ.

51EB

2

WARNING: Disconnect all power to the unit before

installing Plug-in cards.

Adding Option Cards

The MPAX series meters can be fitted with up to three optional plug-in cards.
However, only one card from each function type can be installed at a time. The
function types include Setpoint Alarms (PAXCDS), Communications
(PAXCDC), and Analog Output (PAXCDL). The cards can be installed initially
or at a later date. Each optional plug-in card is shipped with installation and
programming instructions.

COMMUNICATION CARDS (PAXCDC)

A variety of communication protocols are available for the PAX and MPAX
series. Only one of these cards can be installed at a time. When programming
the unit via Crimson, a Windows

®

based program, the RS232 or RS485 Cards

must be used.

*Units available in various connector configurations.

SETPOINT CARDS (PAXCDS)

The MPAX series has four setpoint alarm output plug-in cards. Only one of
these cards can be installed at a time. (Logic state of the outputs can be reversed
in the programming.) These plug-in cards include:

PAXCDS10 - Dual Relay, FORM-C, Normally open & closed
PAXCDS20 - Quad Relay, FORM-A, Normally open only
PAXCDS30 - Isolated quad sinking NPN open collector
PAXCDS40 - Isolated quad sourcing PNP open collector

LINEAR DC OUTPUT (PAXCDL)

Either a 0(4)-20 mA or 0-10 V retransmitted linear DC output is available
from the analog output plug-in card. The programmable output low and high
scaling can be based on the input, max, min, or total display value. Reverse
slope output is possible by reversing the scaling point positions.

PAXCDL10 - Retransmitted Analog Output Card

UNITS LABEL (LX)

The LPAX Display has an area on the front panel designed for a custom units
label. The units label is applied directly to the panel in the embossed area. The
units backlight is then turned on via programming.

Refer to the LPAX Accessories Bulletin for a list of available units labels.

PROGRAMMING SOFTWARE

Crimson 2 (SFCRD2) is a Windows®based program for configuring and
updating the firmware of the MPAXDP meter from a PC. Using Crimson 2
makes programming the MPAXDP meter easier and allows the user to save the
MPAXDP database in a PC file for future use. Crimson is available as a free
download from Red Lion’s website, or it can be purchased on CD.

The first time Crimson 2 is run from the File menu, select “New” to display
a dialog and select the MPAXDP. The screen will display icons that represent
the various programming sections of the MPAXDP. Double-click on an icon to
configure the programming parameters pertaining to the selection. Tool Tip help
is available for each of the program parameters. A PAX serial plug-in card is
required to program the meter using the software.

MPAX MODULES *

SIGNAL TYPE INPUT RANGES

85-250 VAC 11 to 36 VDC/ 24 VAC

LPAX DISPLAY

Dual Process Inputs 0-20 mA or 0-10 VDC MPAXDP00 MPAXDP10 LPAXDA00

7. ENVIRONMENTAL CONDITIONS:
Operating Temperature Range: Determined by the MPAX module
Storage Temperature Range: -40 to 60°C
Operating and Storage Humidity: 0 to 85% max. RH (non-condensing)
Altitude: Up to 2000 meters

8. MOUNTING REQUIREMENTS:
Max. panel thickness is 0.375" (9.5 mm)
Min. panel thickness for NEMA 4/IP65 sealing is 0.060" (1.57 mm)

9. MODULE INSTALLATION:
24-pin shrouded connector on LPAX engages connector on MPAX module
upon installation. Shroud ensures proper alignment by providing a lead-in for
the module connector.

10. CONNECTIONS: All wiring connections are made to the MPAX module
via high compression cage-clamp terminal blocks. Wiring instructions are
provided with the MPAX module.

CAUTION: DISCONNECT ALL POWER BEFORE
INSTALLING OR REMOVING MODULE

11. CONSTRUCTION: Steel front panel, enclosure, and rear cover with
textured black polyurethane paint for scratch and corrosion resistance
protection. Sealed front panel meets NEMA 4/IP65 specifications for indoor
use when properly installed. Installation Category II, Pollution Degree 2.
Panel gasket and keps nuts included.

12. WEIGHT: 2.7 lbs (1.2 kg) (less module)

*For detailed Module specifications, see corresponding PAX literature. (i.e. For MPAXDP specifications, see the PAXDP literature)

OPTIONAL PLUG-IN CARDS AND ACCESSORIES

About the MPAX Input Modules

The MPAX Module serves as the input to the LPAX Display. The MPAX module provides input scaling which allows the LPAX to display most any engineering
unit. Once the MPAX is inserted into the LPAX, the unit has the same functions and capabilities of our PAX Series Intelligent Panel Meters. A full set of PAX
programming instructions will be included with the MPAX Module.

Note: The MPAX provides the operating power for the LPAX, therefore you must select either the AC or DC MPAX corresponding with your application and available

power.

Selecting Your Display Components

To build a complete display unit, you will need an LPAXDP and an MPAXDP Input Module. The LPAX is only a display and will not operate without an MPAX
Module. Please use the following chart to identify the appropriate MPAX Module (including supply power) and LPAX Display that will satisfy your application.

PAXCDC30 - DeviceNet

PAXCDC50 - Profibus-DPPAXCDC2* - RS232 Serial

PAXCDC4* - ModbusPAXCDC1* - RS485 Serial