Red Lion EB-PSE Data Sheet
EB-PSE Industrial PoE Injectors
Sixnet Networking Series
Industrial Power over Ethernet Injectors
Pass Power & Data to your Ethernet Field
Devices over the same Cable.
The EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48
VDC power into 1 or 2 Ethernet ports so that you can pass power and data
over the same wire to your Ethernet devices in the field. The 24V-1 model steps
up your 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is
required. The 48V-2 model is two injectors in one to save space and money.
Both are ultra-rugged, reliable and easy to use.
APPLICATIONS
> Video and security
> Industrial automation and control
> Fully IEEE 802.3af compliant PSE
(Power Sourcing Equipment) operation
FEATURES & BENEFITS
> IEEE 802.3af compliant PoE ports
• Power Sourcing Equipment (PSE) operation
• Auto-detection of PD (powered devices)
• Supplies up to 15.4 watts per channel
• Over-temperature and over-current detection
• Over and under-voltage protection
+24 VDC
PoE Out
PD
(PoE enabled device) or
PoE Splitter and any field device
PRODUCT HIGHLIGHTS
> Process machine and motion control
> Model 1 directly runs off of your existing 24
VDC and powers 1 PoE (48 VDC) port
> Model 2 saves you space and money by
powering 2 PoE (48 VDC) ports
> Industrial rated for -40 to 75°C operation
> True plug and play simplicity
• No user settings
• Ready to use right out of the box
> Trouble free operation
• Ultra-reliable 1,000,000+ hours MTBF
• Slim package for DIN rail or panel mounting
+48 VDC
PoE Out
PD
(PoE enabled device)
Ethernet
EB-PSE-24V-1
Ethernet
Ethernet
EB-PSE-48V-2
compliant
PoE Out
PoE Splitter and any field device
Industrial Power over Ethernet Injectors Specifications
1.01"
[2.57 cm]
EB-PSE-2 4 V - 1
2.90"
[7.35 cm]
4.20"
[10.67 cm]
EB-PSE-4 8 V - 2
Dia. 0.15"
(0.38 cm)
Use for dire ct
panel mount ing
to a flat surface
3.95"
[10.03 cm]
1.98"
[5.02 cm]
1.98"
[5.02 cm]
1.00"
[2.54 cm]
3.26"
[8.28 cm]
0.06"
[0.15 cm]
Removable
Screw Block
Snaps to st andard
DIN rail EN50022
(35 mm)
1.01"
[2.57 cm]
P2
P1
One DC Supply
(18 - 30 VDC)
+
-
Chassis
GND
(panel)
-
+
Two DC Supplies
(18 - 30 VDC)
EB-PSE-24V
Single DC Power
EB-PSE-24V
Dual DC Power
+
-
Chassis
GND
(panel)
+
+
+
+
P1
P2
DC Supply
(45 - 56 VDC)
+
-
EB-PSE-48V
DC Power Input
Chassis
GND
(panel)
+
SWITCH PROPERTIES
Ethernet protocols supported: All IEEE 802.3
Ethernet connectors per channel: 2 (1 for Ethernet in, 1 for PoE out)
Ethernet port standards: 10/100BaseTX IEEE 802.3 / 802.3u
POE OUTPUT
IEEE 802.3af PoE operation: Power Sourcing Equipment (PSE)
PoE power output
48 VDC @ 15.4 Watts per channel
24V model: Derate 1W per 2°C over 60°C
RJ45 PoE pin assignments
A=unused pair: TX(3,6); RX(1,2); V-(7,8); V+(4,5)
B=signal pair: TX/V- (3, 6); RX/V+ (1, 2)
PoE operation: Auto-detection & power management
PoE disconnect mode: AC for 24V-1 and DC for 48V-2
PoE protection: Over-temp, over-current,
OPTIONS
Power input for 48V-2 models: 45-56 VDC @ 31 Watts max.
Power input for 24V-1 models: 18-30 VDC @ 20 Watts max.
Transient protection 15,000 watts peak
Spike protection 5,000 watts (10 times for 10 uS)
SUBMITTED FOR TESTING
Electrical safety:UL508/CSA C22.2/14; EN61010-1, CE
EMI emissions: FCC part 15, ICES-003; EN61000-6-4, CE
EMC immunity: IEC61000-6-2, CE
Hazardous locations: UL1604, CSA C22.2/213 (Class I, Div. 2);
ENVIRONMENTAL
Operating temperature range: -40 to +75°C
24V model: Derate 1W per 2°C over 60°C
Storage temperature range: -40 to +85 °C
Humidity (non-condensing) 5 to 95% RH
Vibration, shock and freefall: IEC68-2-6, -27 and -32
MECHANICAL
DIN rail or direct panel mounting
Packaging - Lexan with IP30 protection
Weight (approximate): 0.17 Kg (0.25 lbs)
Dimensions - 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm)
MTBF (estimated): >1,000,000 hours
over/under-voltage & transient
EN60079-15 (Zone 2; Category 3), CE (ATEX)
(cold startup @ -40°C)
DIMENSIONS
POWER WIRING
ORDERING GUIDE
PART NUMBER DESCRIPTION
EB-PSE-24V-1A
EB-PSE-48V-2A PoE injector for 2 PoE port (uses unused pairs), 48V input
EB-PSE-24V-1B Special order: uses signal pairs for PoE, ideal for 4 wire cables
EB-PSE-48V-2B Special order: uses signal pairs for PoE, ideal for 4 wire cables
PoE injector for 1 PoE port (uses unused pairs), 24V input
ACCESSORIES
PART NUMBER DESCRIPTION
EB-PS-AC48-75
EB-PS-AC48-120 Industrial power supply, AC to 48 VDC, 120W, 2.5A
EB-PD-24V-1
Other voltages available—special order.
All specifications are subject to change. Consult factory for latest info.
Industrial power supply, AC to 48 VDC, 75W, 1.5A
PoE splitter for 24VDC devices, 13W
Loading...