Red Lion EB-PD Data Sheet

EB-PD Indsutrial PoE Switch

PoE In

Ethernet

Non-PoE

Device

+24 VDC

Camera

EB-PD-xxx-1

Industrial PoE Splitter

Power non-PoE or non-Ethernet Devices from your PoE Lines.

These space saving industrial PoE splitters give you all the beneﬁts of Power over Ethernet (PoE) without needing to upgrade your existing non-PoE Ethernet devices. These splitters generate isolated 24 VDC power for your non-PoE or even non-Ethernet devices. Think of this splitter as an industrial 24 VDC power supply that is powered by your incoming PoE (Etherbus) cable. The Ethernet output can be connected to any traditional (non-PoE) Ethernet device. These industrial splitters are ultra-rugged, reliable and easy to use.

PRODUCT HIGHLIGHTS

> One IEEE 802.3af compliant Power

over Ethernet (PoE) port

> One Ethernet output port where the

48 VDC has been removed

> Plug & play saves you time and money

> Truly industrial rated for any application

FEATURES & BENEFITS

> IEEE 802.3af Compliant PoE Inport Ports

• Powered Device (PD) operation

• Accepts power over signal or unused pairs

• Supports power detection & classiﬁcation

> True Isolated Power

• 24 VDC power output (12/14V also available)

• 13 watts of power available

+24 VDC

Ethernet

Non-PoE

Device

Camera

> True Plug and Play Simplicity

• No user settings

• Ready to use right out of the box

> Trouble Free Operation

• Ultra-reliable 1,000,000+ hours MTBF

• Slim package for DIN rail or panel mounting

+14 VDC

Optional

12V Battery

PoE In

Ethernet

Non-PoE

Device

14 VDC Output

Special Order

PLC

compliant

Industrial Power Over Ethernet (PoE) SplitterTM Specifications

GENERAL

Ethernet protocols supported: All IEEE 802.3 Ethernet ports: 2 (1 for PoE in, 1 for Ethernet out) Ethernet port standards: 10/100BaseTX IEEE 802.3 / 802.3u

POE INPUT

Fully IEEE 802.3af compliant IEEE 802.3af PoE operation: Powered Device (PD) PoE power input: Automatic detection and classification (power

is accepted on either the signal or unused pairs) PoE protection: Over/under voltage lockout and inrush control PoE transient protection: 15,000 watts peak PoE spike protection: 5,000 watts (10 times for 10 uS)

POWER OUTPUT

Isolated power Voltage output: 24 VDC, 0.54 Amps (24V model) 14 VDC, 0.93 Amps (UPS model) (special) Power output: 13 watts

ENVIRONMENTAL

Operating temperature range: -40 to +75°C

(cold startup @ -40°C) Storage temperature range: -40 to +85 °C Humidity (non-condensing) 5 to 95% RH Vibration, shock and freefall: IEC68-2-6, -27 and -32

STANDARDS COMPLIANCE

Electrical safety:UL508/CSA C22.2/14; EN61010-1, CE EMI emissions: FCC part 15, ICES-003; EN61000-6-4, CE EMC immunity: IEC61000-6-2, CE Hazardous locations: UL1604, CSA C22.2/213 (Class I, Div. 2);

EN60079-15 (Zone 2; Category 3), CE (ATEX)

PHYSICAL

DIN rail or direct panel mounting Packaging - Polycarbonate with IP30 protection Weight (approximate): 0.17 Kg (0.25 lbs) Dimensions - 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm) MTBF (estimated): >1,000,000 hours

ORDERING GUIDE

PART NUMBER DESCRIPTION

EB-PD-24V-1

EB-PD-UPS-1

(special)

PoE splitter to power non-PoE or non-Ethernet 24 VDC dvices

PoE splitter for non-PoE 12/14 VDC devices and/or to charge a

12 VDC battery for UPS backup

ACCESSORIES

PART NUMBER DESCRIPTION

EB-5ES-PSE-#

EB-PSE-24V-1A

EB-PSE-48V-1A

All speciﬁcations are subject to change. Consult factory for latest info.

5 port Industrial Ethernet switch with 4 PoE ports

PoE injector for 1 PoE port (uses unused pairs), 24V input

PoE injector for 2 PoE port (uses unused pairs), 48V input

MECHANICAL DRAWING

POWER WIRING