Red Lion EB-5ES-PSE Data Sheet

EB-5ES-PSE Industrial PoE Switch

Sixnet Networking Series

5 Port Power Over Ethernet Industrial Switch

The EB-5ES-PSE combines the ultra-reliability of a 5 port Sixnet industrial Ethernet switch with four industrial PoE sourcing outputs.

Simply power this switch with 48 VDC to source the PoE lines. The four PoE ports automatically sense and support both PoE and non-PoE (traditional) Ethernet devices. Or power this switch with 10-30 VDC and it functions as a robust 5 port industrial switch that is PoE future-ready.

APPLICATIONS

> Video and security

> Industrial automation and control

> Process xxxxx and motion control

FEATURES & BENEFITS

> IEE 802.3af compliant PoE ports

• Power Sourcing Equipment (PSE) operation

• Auto-detection of PD (powered devices)

• Over-temperature and over-current detection

• Over and under-voltage detection

> Real-time network operation

• Intelligent message routing - No collisions!

• Supports all standard IEEE 802.3 protocols

> True plug-and-play simplicity

• Auto-sensing for speed and duplex

• Auto-mdi/mdix-crossover and auto-polarity

• Automatic PoE power management

PRODUCT HIGHLIGHTS

> Four fully IEEE-compliant PoE ports

> Slim packaging ﬁts on your DIN rail

> Plug and play saves you time and money

> Truly industrial rated for any application

> Trouble free operation

• Truly industrial -40 to 75°C operation

• Dual power inputs with surge protection

• DIN rail or direct panel mounting

• UL / CSA (CUL), CE, hazardous locations

and Maritime rated

> Networking features

• Store and forward wire speed switching

• Automatic address learning, aging and migration

• Full-Duplex operation with ﬂow control

• Auto crossover (MDI/MDIX) and auto polarity

compliant

5 Port Power Over Ethernet Industrial Switch Specifications

SWITCH FEATURES

Ethernet switch ports 5 total with 4 PoE (PSE) Unmanaged, store and forward, wire speed Ethernet protocols supported all IEEE 802.3 RJ45 ports (shielded) 10/100BaseTX RJ45 speed (10 or 100 Mbps) auto-negotiation RJ45 MDI/MDIX auto-crossover and TD/RD auto-polarity Ethernet isolation 1500 VRMS 1 minute Fiber optic port speed / 100BaseF (100 Mbps) full duplex Fiber optic port wavelength 1300 nm (others available) Fiber multimode (mm) typical 50 or 62.5/125 um (SC or ST) Fiber singlemode (sm) typical 9 or 10/125 um (SC or ST) Fiber max. distance (full duplex) 4 km (mm), 20 (sm)

or 40 km (long haul) or more

Typical latency for 100 Mbps ports 5 us + frame time;

varies on load

MAC addresses and bandwidth 1024 and 3.2 Gbps

POWER INPUT AND POE OUTPUT

Power input with reverse polarity protection; 10-30 VDC

with no PoE output; 45-56 VDC for PoE output

Switch power consumption (typ.all ports active at 100 Mbps):

2.0 W (5-port without fiber) + PoE; 3.0 W

(5-port with 1 fiber) + PoE PoE power consumption up to 15.4 W per port RJ45 pin assignments for PoE: TX/V- (3, 6); RX/V+ (1, 2) Power input transient protection 15,000 watts peak Power input spike Protection 5,000 watts (10 times for 10 uS) PoE operation - auto power management PoE disconnect mode - DC disconnect PoE auto-detection per IEEE 802.3af PoE protection - over-temperature, over-current,

over/under-voltage and transient

ETHERNET COMPLIANCE

IEEE 802.3af (Power over Ethernet) IEEE 802.3 (10Mbps Ethernet for legacy devices) IEEE 802.3u (100Mbps Ethernet for newer devices) IEEE 802.3x (Full-Duplex with Flow Control)

ENVIRONMENTAL

Operating temperature range -40 to +75 °C

(cold startup @ -40) Storage temperature range -40 to +85 °C Humidity (non-condensing) 5 to 95% RH Vibration, shock and freefall IEC60068-2-6, -27 & -32

STANDARDS COMPLIANCE

Electrical safety - UL508 / CSA C22.2/14; EN61010-1, CE EMI emissions - FCC part 15, ICES-003; EN61000-6-4, CE EMC immunity - EN61000-6-2, CE Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2);

EN60079-15 (Zone 2, Category 3), CE (ATEX) Marine and offshore rated per ABS Eye safety (fiber models) IEC60825-1, Class 1; FDA 21

CFR1040.10 and 1040.11

MECHANICAL

DIN rail or direct panel mounting Lexan case with IP30 protection Dimensions - see mechanical diagram Weight (approximate) 0.17 Kg (6 oz)

All speciﬁcations are subject to change. Consult factory for latest info.

ORDERING GUIDE

EB-5ES-PSE-1 5 RJ45 10/100 Ethernet ports including 4 PoE (PSE) ports

EB-5ES-PSE-2SC 4 RJ45 PoE (PSE) ports and 1 multimode

EB-5ES-PSE-2ST (Special Order)

EB-5ES-PSE-3SC 4 RJ45 PoE (PSE) ports and 1 singlemode

EB-5ES-PSE-3ST (Special Order)

EB-PD-24V-1 PoE splitter for non PoE devices

EB-PS-AC48-75 AC to 48 VDC, 75W power supply

Contact Red Lion for special or long haul ﬁber transceivers up to 120 km.

DIMENSIONS

PART NUMBER DESCRIPTION

Fiber port with SC or ST style connector for up to 4 km

Fiber port with SC or ST style connector for up to 20 km