Red Lion 7010TX Data Sheet

7010TX Industrial Ethernet Switch

THE INDUSTRIAL NETWORK COMPANY

7010TX

N-Tron Networking Series

Managed Industrial Ethernet Switch

PRODUCT FEATURES

• Eight 10/100BaseTX RJ-45 Ports

• Two SFP Gigabit ports

o

• -40

• Onboard Temperature Sensor

• ESD and Surge Protection Diodes on all Ports

• Auto Sensing 10/100BaseTX, Duplex, and MDIX

• Store-and-forward Technology

• Rugged DIN-Rail Enclosure

• Redundant Power Inputs (10-49VDC)

• Con gurable Bi-Color Fault Status LED

C to 70oC Operating temperature

FULLY MANAGED FEATURES:

• SNMP v1, v2, v3 and Web Browser Management

• Con guration backup via Optional SD card

• Detailed Ring Map and Fault Location Charting

™

• N-Ring

• N-Link

Technology with ~30ms Healing

™

Redundant N-Ring Coupling

• RSTP - IEEE 802.1D

• N-View

™

OPC Monitoring

• IGMP Auto con guration

• 802.1Q tag VLAN and Port VLAN

• 802.1p QoS, Port QoS, and DSCP

™

• EtherNet/IP

CIP Messaging

• LLDP (Link Layer Discovery Protocol)

• Trunking

• Port Mirroring

• 802.1d, 802.1w, 802.1D RSTP

• DHCP Server, Option 82 relay, Option 61,
IP Fallback

• Local Port IP Addressing

• Port Security—MAC Address Based

The N-TRON® 7010TX compact, fully managed industrial
Ethernet switch is housed in a rugged industrial metal enclosure
and offers a powerful combination of eight 10/100BaseTX
copper ports and two SFP gigabit ports. It is ideally suited for use
in industrial applications such as factory  oor control networks,
utilities, wind turbines, wastewater treatment facilities, rail car,
intelligent traf c control and transportation applications, and any
other application where high reliability, superior noise immunity,
extreme ruggedness, and extended distance are required.

Remote Monitoring Options - Web browser and N-View
OPC (OLE for process control) server software provides
con guration and monitoring capability. N-View software easily
combines with HMI software to monitor network traf c, alarms,
and trends. SNMP is also available for switch link and status
monitoring. Status LEDs are con gurable to indicate power
failure and N-Ring status.

N-Ring Technology - N-Ring technology provides expanded
ring capacity, detailed fault diagnostics, and fast 30ms healing
time. The ring manager validates the integrity of the ring
using health check packets and quickly converts the ring to
a linear topology within ~30ms when an error is detected.
The health status of a ring comprised of all N-TRON fully
managed switches may be monitored. A detailed ring map and
fault location chart may be accessed by the ring manager's
web browser or the OPC server. N-Link allows the linking of
two N-Rings. Up to 250 fully managed N-TRON switches are
supported in an N-Ring topology.

Industrial Speci cations - High MTBF, extended shock and
vibration speci cations, wide operating temperature range and
redundant power inputs are standard features.

Ease of Use - The 10/100BaseTX ports are auto sensing and
auto con guring. Each copper port is automatically negotiated
for maximum speed and performance by default, but can
also be hard coded through the user interface. A high-speed
processor allows wire speed capability on all 10/100BaseTX
ports simultaneously.

7010TX Specifications

THE INDUSTRIAL NETWORK COMPANY

7010TX Speci cations

Switch Properties

Number of MAC Addresses: 8000
Aging Time: Programmable
Latency Typical: 2.6 μs
Switching Method: Store-and-Forward

Case Dimensions

Height: 4.3" (11 cm)
Width: 2.4" (6.1 cm)
Depth: 4.6" (11.5 cm)
Weight (max): 1.4lbs (0.6 kg)
DIN-Rail Mount: 35mm

Electrical

Redundant Input Voltage: 10-49 VDC (Regulated)
Input Current (max): 410mA max.@24VDC
BTU/hr: 33.6@24VDC
N-TRON Power Supply: NTPS-24-1.3 (1.3A@24V)

Environmental

Operating Temperature: -40oC to 70oC
Storage Temperature: -40oC to 85oC
Operating Humidity: 5% to 95%

(Non Condensing)
Operating Altitude: 0 to 10,000 ft.

Shock and Vibration (bulkhead mounted)

Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial

SFP Gigabit Fiber Transceiver Characteristics

Fiber Length

TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm
RX Sensitivity Max -17dBm -20dBm -22dBm
Wavelength 850nm 1310nm 1310nm 1550nm

Assumed Fiber Loss 3.5 to 3.75 dB/km .45dB/km .35dB/km .25dB/km

550m for 50/125μm

275m @62.5/125μm*

10km** 40km** 80km**

-24dBm

* SX Fiber Optic Cable
** LX Fiber Optic Cable

Connectors

10/100BaseTX: Eight (8) RJ-45 Copper Ports
1000BaseSX: Up to Two (2) LC Duplex Gigabit

Fiber Ports (optional)

Recommended Wiring Clearance

Front: 4" (10.2 cm)
Side: 1" (2.6 cm)

Regulatory Approvals

• FCC Title 47, Part 15, Subpart B - Class A; ICES-003 - Class A

• GOST-R Certi ed, RoHS Compliant

• UL/cUL: UL 508 and ANSI/ISA-12.12.01-2007
Class I, Div 2, Groups A, B, C, and D; T4

Designed to comply with:

• IEEE 1613 for Electric Utility Substations

• NEMA TS1/ TS2 for Traf c control

• IEC-61850

Reliability

MTBF: >2 Million Hours

Network Media

10BaseT: ≥Cat3 Cable
100BaseTX: ≥Cat5 Cable

1000BaseTX: ≥Cat5e Cable