All rights reserved. Red Lion, the Red Lion logo and N-Tron are registered trademarks of Red Lion Controls,
Inc. All other company and product names are trademarks of their respective owners.
CONTACT INFORMATION :
AMERICAS
York, PA: +1 (717) 767-6511
Mobile, AL: +1 (251) 342-2164
Ballston Lake, NY: +1 (518) 877-5173
Hours: 8am-6pm Eastern Standard Time
(UTC/GMT -5 hours)
ASIA-PACIFIC
Shanghai, P.R. China: +86 21-6113-3688 x767
Hours: 10am-6pm China Standard Time
(UTC/GMT +8 hours)
EUROPE
The Netherlands: +31 33-4723-225
Hours: 9am-6pm Central European Time
(UTC/GMT +1 hour)
Portions of this document are intended solely as an outline of methodologies to be followed during the
maintenance and operation of N-Tron® 300 series Industrial Ethernet Switch equipment. It is not intended as a
step-by-step guide or a complete set of all procedures necessary and sufficient to complete all operations.
While every effort has been made to ensure that this document is complete and accurate at the time of release, the
information that it contains is subject to change. Red Lion Controls is not responsible for any additions to or
alterations of the original document. Industrial networks vary widely in their configurations, topologies, and traffic
conditions. This document is intended as a general guide only. It has not been tested for all possible applications,
and it may not be complete or accurate for some situations.
Users of this document are urged to heed warnings and cautions summarized at the front of the document, such as
electrical hazard warnings.
Compliance Information
It is recommended that the owner of this equipment determine and ensure conformance with any specific and
applicable local regulations.
Part 15 of the Federal Communications Commission (FCC) - A Rules: Interference
Every effort has been made to ensure that this equipment is designed to comply with the limits for a Class A digital
device, as described in the FCC Rules.
This product complies with Part 15 of the FCC-A Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful Interference
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this device in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions; (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant des
règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas
causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris
l'interférence qui peut causer l'opération peu désirée.
N-Tron® 300 Series Hardware Guideiii
PrefaceRevised 2015-12-04
Environmental Impact Statement
Red Lion equipment contains no hazardous materials as defined by the United States Environmental Protection
Agency (USEPA). Red Lion recommends that all failed product be returned to Red Lion for failure analysis and
proper disposal.
Toxic Emissions
Red Lion equipment releases no toxic emissions.
Trademark Acknowledgments
Ethernet is a registered trademark of Xerox Corporation.
All other product names, company names, logos or other designations mentioned herein are trademarks of their
respective owners.
Applicable 300 Series Industrial Ethernet Switches
This Hardware Installation Guide applies to the following 300 series devices:
302MC-XX302MCE-XX-YY304TX
305FX-XX305FXE-XX-YY
306TX306FX2-XX306FXE2-XX-YY
308TXWhere: XX=ST or SC and YY= -15, -40, or -80
Release Notes and Document Updates
The hard copy and electronic media versions of this document are revised only at major releases and therefore,
may not always contain the latest product information. As needed, Documentation Notes and/or Product Bulletins
will be provided between major releases to describe any new information or document changes.
The latest online version of this document and all product updates can be accessed through the Red Lion web site
at http://www.redlion.net
Publication History
The following information lists the release history of this document.
Issue/RevisionContent Description
Revised 2011-11-29Document Updates
Revised 2015-11-06Document reformatted and safety information added.
Related Documents
Visit the Technical Resources page on the Red Lion website at the following link to view available documents
related to this product.
ivN-Tron® 300 Series Hardware Guide
PrefaceRevised 2015-12-04
www.redlion.net/n-tron_documentation
Document Comments
Red Lion appreciates all comments that will help us to improve our documentation quality. The user can submit
comments through the Red Lion Customer Service. Simply email us at customer.service@redlion.net.
Additional Product Information
Additional product information can be obtained by contacting the local sales representative or Red Lion through the
contact numbers and/or e-mail addresses listed on the inside of the front cover.
Warnings and Cautions / Avertissements et mises en garde
Warnings apply to situations where personal injury or death may result.
Mises en garde s'appliquent aux situations où des blessures corporelles ou la mort peuvent en résulter.
Cautions apply to where reduced function or damage to equipment may result.
Avertissements s'appliquent à où fonction réduite ou d'endommagement de l'équipement peut entraîner.
General Safety Cautions and Warnings / Précautions et avertissements de sécurité générale
CAUTION: Do not perform any services on the unit unless qualified to do so. Do not substitute
unauthorized parts or make unauthorized modifications to the unit.
ATTENTION: Ne pas effectuer de services sur l'appareil s'il n'est pas qualifié pour le faire. Ne pas
substituer pièces non autorisées ou de modifications non autorisées de l'appareil.
WARNING: Do not operate the unit with the top cover removed, as this could create a shock or
fire hazard.
AVERTISSEMENT - Ne pas faire fonctionner l'unité avec le couvercle retiré, ceci pourrait créer
une décharge électrique ou un incendie.
CAUTION:
ATTENTION: N'obstruez pas les fentes d'aération de l'unité.
Do not block any air vents on the unit.
N-Tron® 300 Series Hardware Guidev
PrefaceRevised 2015-12-04
Electrical Safety Warnings / Avertissements de sécurité électrique
WARNING: Do not work on equipment or cables during periods of lightning activity.
AVERTISSEMENT: Ne pas travailler sur le matériel ou les câbles pendant les périodes d'activité
de la foudre.
WARNING: Properly ground the unit before connecting anything else to the unit. Units not
properly grounded may result in a safety risk and could be hazardous and may void the warranty.
See the grounding technique section of this Hardware Guide for proper ways to ground the unit.
AVERTISSEMENT: Correctement à la terre de l'unité avant tout raccordement à l'unité. Unités
pas correctement mise à la terre peut entraîner un risque de sécurité et pourraient être dangereux
et peut annuler la garantie. Voir la section technique de mise à la terre de ce mode d'emploi des
moyens appropriés à la masse de l'appareil.
WARNING: Do not operate the unit with the top cover removed, as this could create a shock or
fire hazard.
AVERTISSEMENT: Ne pas faire fonctionner l'unité avec le couvercle retiré, ceci pourrait créer
une décharge électrique ou un incendie.
WARNING: Power must be supplied by an isolating source, and a 3.3A max. rated UL recognized
fuse must be installed immediately before the unit.
AVERTISSEMENT: Celui-ci doit être alimenté par une source à isolation et un 3.3A fusible
homologué UL nominale max. doit être installé immédiatement avant l'unité.
CAUTION: Observe proper DC Voltage polarity when installing power input cables. Reversing
voltage polarity can cause permanent damage to the unit and voids the warranty.
ATTENTION: Respecter la polarité correcte de tension DC lors de l'installation des câbles
d'alimentation d'entrée. Inversion de polarité de tension peut causer des dommages permanents à
l'appareil et annule la garantie.
Environmental Safety Cautions and Warnings / Sécurité environnementale mises en garde et avertissements
CAUTION: This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D or nonhazardous locations only.
ATTENTION: Cet équipement est adapté pour une utilisation dans la classe I, Division 2, Groupes
A, B, C et D ou non dangereux endroits seulement.
WARNING: Do not operate the equipment in the presence of flammable gases or fumes.
Operating electrical equipment in such an environment constitutes a definite safety hazard.
AVERTISSEMENT: Ne pas utiliser le matériel en présence de gaz ou de vapeurs inflammables.
L'utilisation de matériel électrique dans un tel environnement constitue un danger certain.
viN-Tron® 300 Series Hardware Guide
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.