1 / 4
2 / 4
Thank you for having chosen our company’s bubble machine. For your own safety, please read this
user manual carefully before installing the device.
When receiving the machine, open the package and check carefully whether the machine is
damaged or the accessories are lost, if any problems, please contact the supplier.
Before connect to power, you should check whether the voltage you use is suitable for the bubble
machine or not. It is recommended that each bubble machine has an independent power supply
switch, so that you can turn on or off each bubble machine
Note: when connecting the power supply, the ground wire must be safely grounded, and the
electrical installation shall comply with all relevant standards.
Parameters
Power: 300W
Voltage: AC 220V 50Hz
Control mode: wireless remote control, electronic control
Coverage area: 30-40 square meters
Liquid capacity: 2 L
Weight: 12 KG
Size : 56*42*48cm
Operating instructions
1. put the bubble machine in the selected position
2. plug the power cord into the socket port
3. turn on the power switch
4. open the remote control switch, test the remote control
5. before use, please put the bubble liquid into the liquid tank in front of the bubble
machine, be careful not to pour too full, to prevent the bubble liquid spill. Before pour the
liquid, please check whether the door shut.
6. remote control switch on the lights, manual switch off, you can remote control
7. manual switch light on, remote control switch off, manual operation
8. after using, please release liquid and close the door. And please wipe out the liquid on
machine , avoiding to corrode the housing of machine.
3 / 4
Attention
1. When the machine works, children do not approach.
2. When the machine working, the floor will be wet . please put the blanket in the floor to
avoid slipping.
3. If the bubble liquid is not enough, please add in time.
4. Non working conditions, the hand is not allowed to toggle the water wheel.
5. Liquid tank is prohibited from falling into the debris, avoid to damage the water wheel
6. When moving, gently handle, do not dump.
7. This fog machine should be used in dry and well-ventilated place. Please avoid any water
or rain fall in the machines, if water and rain fall in, turn off the power immediately. Keep
far away from children, fire, explosive and flammable things, and avoid scalding.
8. When working, do not touch the machine and power cord.
9. When long time no use or after use, please disconnect power or unplug the power cord.
Maintenance
Cleaning and use frequency
In order to ensure the stable operation of the bubble machine , should keep them clean,
recommended every 15 days to clean a body. When the bubble machine can not work, pull out
the troubleshooting and start the bubble machine, but need professional maintain the machine.
Simple fault maintenance
Fault description
Take countermeasure
Bubble machine doesn’t work
Check whether the fuse is burned
Bubble machine doesn’t spray bubble
Check whether the bubble liquid run out
Check whether the motor is damaged.
4 / 4
Loading...