Red Hat NETWORK SATELLITE SERVER 3.7, RHN Satellite Server 3.7 Installation Manual
RHN Satellite Server 3.7
Installation Guide
RHN Satellite Server 3.7: Installation Guide
Copyright © 2001 - 2005 by Red Hat, Inc.
Red Hat, Inc.
1801 Varsity Drive
Raleigh NC 27606-2072 USA
Phone: +1 919 754 3700
Phone: 888 733 4281
Fax: +1 919 754 3701
PO Box 13588
Research Triangle Park NC 27709 USA
RHNsatellite(EN)-3.7-RHI (2005-03-16T12:14)
Copyright © 2005 by Red Hat, Inc. This material may be distributed only subject to the terms and conditions set forth in the
Open Publication License, V1.0 or later (the latest version is presentlyavailableat http://www.opencontent.org/openpub/).
Distribution of substantively modified versions of this document is prohibited without the explicit permission of the copyright
holder.
Distribution of the work or derivative of the work in any standard (paper) book form for commercial purposes is prohibited
unless prior permission is obtained from the copyright holder.
Red Hat and the Red Hat "Shadow Man" logo are registered trademarks of Red Hat, Inc. in the United States and other
countries.
All other trademarks referenced herein are the property of their respective owners.
The GPG fingerprint of the security@redhat.com key is:
CA 20 86 86 2B D6 9D FC 65 F6 EC C4 21 91 80 CD DB 42 A6 0E
Table of Contents
1. Introduction..................................................................................................................................... 1
1.1. Red Hat Network ............................................................................................................... 1
1.2. RHN Satellite Server.......................................................................................................... 1
1.3. Terms to Understand .......................................................................................................... 2
1.4. How it Works ..................................................................................................................... 2
1.5. Summary of Steps.............................................................................................................. 4
2. Requirements................................................................................................................................... 7
2.1. Software Requirements...................................................................................................... 7
2.1.1. Red Hat Enterprise Linux AS 4 Packages .......................................................... 7
2.1.2. Red Hat Enterprise Linux AS 3 Update 3 Packages........................................... 8
2.1.3. Red Hat Enterprise Linux AS 2.1 Update 5 Packages........................................ 9
2.2. Hardware Requirements..................................................................................................... 9
2.3. Database Requirements.................................................................................................... 10
2.4. Additional Requirements ................................................................................................. 11
3. Example Topologies ...................................................................................................................... 15
3.1. Single Satellite Topology ................................................................................................. 15
3.2. Multiple Satellite Horizontally Tiered Topology ............................................................. 15
3.3. Satellite-Proxy Vertically Tiered Topology ..................................................................... 16
4. Installation..................................................................................................................................... 17
4.1. Base Install....................................................................................................................... 17
4.2. RHN Satellite Server Installation Program.................................................................17
4.3. Sendmail Configuration ................................................................................................... 28
4.4. MySQL Installation ......................................................................................................... 29
5. Entitlements...................................................................................................................................31
5.1. Receiving the Certificate.................................................................................................. 31
5.2. Uploading the RHN Entitlement Certificate ....................................................................32
5.3. Managing the RHN Certificate with RHN Satellite Activate ........................................ 32
5.3.1. Command Line Entitlement Options ................................................................32
5.3.2. Activating the Satellite...................................................................................... 33
6. Importing and Synchronizing...................................................................................................... 35
6.1. RHN Satellite Synchronization Tool ............................................................................ 35
6.1.1. Import/Sync Steps .............................................................................................35
6.1.2. Import/Sync Options ......................................................................................... 35
6.1.3. Import/Sync Cache Refresh ..............................................................................37
6.2. Importing.......................................................................................................................... 37
6.2.1. Prerequisites...................................................................................................... 38
6.2.2. Preparing for Import ......................................................................................... 38
6.2.3. Running the Import ........................................................................................... 39
6.3. Synchronizing .................................................................................................................. 40
6.3.1. Synchronizing Errata and Packages Directly via RHN .................................... 40
6.3.2. Synchronizing Errata and Packages via Local Media.......................................40
7. Troubleshooting............................................................................................................................. 43
7.1. Log Files .......................................................................................................................... 43
7.2. General Problems............................................................................................................. 43
7.3. Host Not Found/Could Not Determine FQDN ................................................................ 44
7.4. Connection Errors ............................................................................................................ 45
7.5. Caching Issues ................................................................................................................. 46
7.6. Satellite Debugging by Red Hat ...................................................................................... 46
8. Maintenance ..................................................................................................................................49
8.1. Managing the Satellite Service ........................................................................................ 49
8.2. Updating the Satellite....................................................................................................... 49
8.3. Backing Up the Satellite .................................................................................................. 50
8.4. Using RHN DB Control ................................................................................................. 50
8.4.1. DB Control Options .......................................................................................... 50
8.4.2. Backing up the Database................................................................................... 51
8.4.3. Verifying the Backup ........................................................................................52
8.4.4. Restoring the Database ..................................................................................... 52
8.5. Cloning the Satellite with Embedded DB ........................................................................ 52
8.6. Establishing Redundant Satellites with Stand-Alone DB ................................................ 53
8.7. Conducting Satellite-Specific Tasks ................................................................................ 54
8.7.1. Using the Tools menu ....................................................................................... 54
8.7.2. Deleting Users................................................................................................... 55
8.8. Automating Synchronization ........................................................................................... 56
8.9. Implementing PAM Authentication................................................................................. 57
8.10. Enabling Push to Clients ................................................................................................ 58
A. Sample RHN Satellite Server Configuration File...................................................................... 59
Index................................................................................................................................................... 61
Chapter 1.
Introduction
RHN Satellite Server provides a solution to organizations requiring absolute control over and privacy
of the maintenance and package deployment of their servers. It allows Red Hat Network customers
the greatest exibility and power in keeping servers secure and updated.
Two types of RHN Satellite Server are available: One with a stand-alone database on a separate machine and one with an embedded database installed on the same machine as the Satellite. This guide
describes the installation of both types of Satellite.
Although the two types of RHN Satellite Server are functionally similar, some differences do exist.
These variations are primarily isolated to hardware requirements, installation steps, and maintenance
activities, but may also crop up during troubleshooting. This guide identifies distinctions between the
Satellite types by marking the differing instructions as either Embedded Database or Stand-Alone
Database.
1.1. Red Hat Network
Red Hat Network (RHN) is the environment for system-level support and management of Red Hat
systems and networks of systems. Red Hat Network brings together the tools, services, and information repositories needed to maximize the reliability, security, and performance of their systems. To use
RHN, system administrators register the software and hardware profiles, known as System Profiles,
of their client systems with Red Hat Network. When a client system requests package updates, only
the applicable packages for the client are returned (based upon the software profile stored on the RHN
Servers).
Advantages of using Red Hat Network include:
• Scalability — with Red Hat Network, a single system administrator can set up and maintain hun-
dreds or thousands of Red Hat systems more easily, accurately, and quickly than that same administrator could maintain a single system without Red Hat Network.
• Standard Protocols — standard protocols are used to maintain security and increase capability. For
example, XML-RPC gives Red Hat Network the ability to do much more than merely download
files.
• Security — all communication between registered systems and Red Hat Network takes place over
secure Internet connections.
• View Errata Alerts — easily view Errata Alerts for all your client systems through one website.
• Scheduled Actions — use the website to schedule actions, including Errata Updates, package in-
stalls, and software profile updates.
• Simplification — maintaining Red Hat systems becomes a simple, automated process.
1.2. RHN Satellite Server
RHN Satellite Server allows organizations to utilize the benefits of Red Hat Network without having
to provide public Internet access to their servers or other client systems. System Profiles are stored
locally. The Red Hat Network website is served from a local Web server and is not accessible from the
Internet. All package management tasks, including Errata Updates, are performed through the local
area network.
Advantages of using RHN Satellite Server include:
2 Chapter 1. Introduction
• Security — an end-to-end secure connection is maintained from the client systems to the RHN
Satellite Server without connecting to the public Internet.
• Efficiency — packages are delivered significantly faster over a local area network.
• Control — clients’ System Profiles are stored on the local RHN Satellite Server, not on the central
Red Hat Network Servers.
• Customized updates — create a truly automated package delivery system for custom software pack-
ages required by client systems, as well as official Red Hat packages. Custom channels allow finegrained control of the delivery of custom packages.
• Access control — system administrators can be restricted to access only those systems within their
maintenance responsibilities.
• Bandwidth management — the bandwidth used for transactions between the clients and the RHN
Satellite Server is controlled by the organization on the local area network; RHN Satellite Server
clients do not have to compete with other clients accessing the central Red Hat Network file servers.
• Scalability — RHN Satellite Server may oversee an entire organization’s servers in combination
with RHN Proxy Server.
1.3. Terms to Understand
Before understanding RHN Satellite Server, it is important to become familiar with the following Red
Hat Network terms:
• Channel — A channel is a list of software packages. There are two types of channels: base channels
and child channels. A base channel consists of a list of packages based on a specific architecture
and Red Hat release. A child channel is a channel associated with a base channel but contains extra
packages.
• Organization Administrator — An Organization Administrator is a user role with the highest level
of control over an organization’s Red Hat Network account. Members of this role can add other
users, systems, and system groups to the organization as well as remove them. A Red Hat Network
organization must have at least one Organization Administrator.
• Channel Administrator — A Channel Administrator is a user role with full access to channel man-
agement capabilities. Users with this role are capable of creating channels, assigning packages to
channels, cloning channels, and deleting channels. This role can be assigned by an Organization
Administrator through the Users tab of the RHN website.
• Red Hat Update Agent — The Red Hat Update Agent is the Red Hat Network client application
(up2date) that allows users to retrieve and install new or updated packages for the client system
on which the application is run.
• Traceback — A traceback is a detailed description of "what went wrong" that is useful for trou-
bleshooting the RHN Satellite Server. Tracebacks are automatically generated when a critical error
occurs and are mailed to the individual(s) designated in the RHN Satellite Server’s configuration
file.
For more detailed explanations of these terms and others, refer to the Red Hat Network Reference
Guide.
1.4. How it Works
RHN Satellite Server consists of the following components:
Chapter 1. Introduction 3
• Database — for the Stand-Alone Database, this may be the organization’s existing database or,
preferably, a separate machine. RHN Satellite Server 3.7 supports Oracle 9i R2. For the Embedded
Database, the database comes bundled with RHN Satellite Server and is installed on the same
machine as the Satellite during the installation process.
• RHN Satellite Server — core "business logic" and entry point for Red Hat Update Agent running
on client systems. The RHN Satellite Server also includes an Apache HTTP Server (serving XMLRPC requests).
• RHN Satellite Server Web interface — advanced system, system group, user, and channel manage-
ment interface.
• RPM Repository — package repository for official Red Hat RPM packages and custom RPM pack-
ages identified by the organization.
• Management Tools:
• Database and filesystem synchronization tools
• RPM importing tools
• Channel maintenance tools (Web-based)
• Errata management tools (Web-based)
• User management tools (Web-based)
• Client system and system grouping tools (Web-based)
• Red Hat Update Agent on the client systems
The Red Hat Update Agent on the client systems must be reconfigured to retrieve updates from the
organization’s internal RHN Satellite Server instead of the central Red Hat Network Servers. After
this one-time reconfiguration, client systems may retrieve updates locally using the Red Hat Update
Agent, or system administrators may schedule actions through the RHN Satellite Server website.
Important
Red Hat strongly recommends that clients connected to RHN Satellite Server be running the latest
update of Red Hat Enterprise Linux to ensure proper connectivity.
When a client requests updates, the organization’s internal RHN Satellite Server queries its database,
authenticates the client system, identifies the updated packages available for the client system, and
sends the requested RPMs back to the client system. Depending upon the client’s preferences, the
package may also be installed. If the packages are installed, the client system sends an updated package profile to the database on the RHN Satellite Server; those packages are removed from the list of
outdated packages for the client.
The organization can configure the website for the RHN Satellite Server to be accessible from the
local area network only or from both the local area network and the Internet. The Satellite’s version
of the RHN website allows full control over client systems, system groups, and users.
The RHN Satellite Server management tools are used to synchronize the RHN Satellite Server
database and package repository with Red Hat Network. The RHN Satellite Server import tool
allows the system administrator to include custom RPM packages in the package repository.
RHN Satellite Server can be used in conjunction with RHN Proxy Server to deliver a distributed,
self-contained Red Hat Network deployment for the organization. For example, an organization can
maintain one RHN Satellite Server in a secure location. Red Hat systems with local network access
to the RHN Satellite Server can connect to it. Other remote offices can maintain RHN Proxy Server
installations that connect to the RHN Satellite Server. The different locations inside the organization
4 Chapter 1. Introduction
must be networked, but this can be a private network; an Internet connection is not required for any of
the systems. Refer to the RHN Proxy Server Installation Guide for more information.
Figure 1-1. Using RHN Satellite Server and RHN Proxy Server Together
1.5. Summary of Steps
Implementing a fully functional RHN Satellite Server requires more than installing software and a
database. Client systems must be configured to use the Satellite. Custom packages and channels should
be created for optimal use. Since these tasks extend beyond the basic installation, they are covered in
detail in other guides, as well as this RHN Satellite Server Installation Guide. For a full list of the
necessary technical documents, refer to Chapter 2 Requirements.
For this reason, this section seeks to provide a definitive list of all required and recommended steps,
from evaluation through custom package deployment. They should take place in roughly this order:
1. After an evaluation, you contact your Red Hat sales representative to purchase RHN Satellite
Server.
2. Your Red Hat contact sends you an RHN Entitlement Certificate via email.
3. Your Red Hat contact creates a Satellite-entitled account on the RHN website and sends you the
login information.
4. You log into the RHN website (rhn.redhat.com) and download the distribution ISOs for Red Hat
Enterprise Linux AS and RHN Satellite Server 3.7. Remember, Monitoring requires Red Hat
Enterprise Linux AS 3 or 4. These can be found within the Downloads tab of the respective
Channel Details pages. Refer to the RHN Reference Guide for instructions.
5. While still logged into the RHN website, you download the Channel Content ISOs to be served
by your Satellite, also available through the Downloads tab of your Satellite’s Channel Details
Chapter 1. Introduction 5
page. These Channel Content ISOs differ from the distribution ISOs previously mentioned in
that they contain metadata necessary for parsing and serving packages by Satellite.
6. If installing a Stand-Alone Database, you prepare your database instance using the formula
provided in Chapter 2 Requirements.
7. You install Red Hat Enterprise Linux AS and then RHN Satellite Server 3.7 on the Satellite
machine.
8. You create the first user account on the Satellite by opening the Satellite’s hostname in a Web
browser and clicking Create Account. This will be the Satellite Administrator’s account.
9. You use the RHN Satellite Synchronization Tool to import the channels and associated packages into the Satellite.
10. You register a representative machine for each distribution type, or channel (Red Hat Enterprise
Linux AS 2.1, 3, 4), to the Satellite.
11. You copy (using SCP) the rhn_register and up2date configuration files from the
/etc/sysconfig/rhn/ directory of each machine individually to the /pub directory on the
Satellite. The rhn-org-trusted-ssl-cert-*.noarch.rpm will already be there.
12. You download and install from the Satellite the configuration files and
rhn-org-trusted-ssl-cert-*.noarch.rpm on the remaining client systems of the same
distribution type. Repeat this and the previous step until all distribution types are complete.
13. Through the Satellite’s website, you create an Activation Key for each distribution aligned to
the appropriate base channel. At this point, system groups and child channels may also be predefined.
14. You then run the Activation Key from the command line (rhnreg_ks) of each client system.
Note that this step can be scripted to batch register and reconfigure all remaining client systems
in a distribution.
15. You should record all relevant usernames, passwords and other login information and store in
multiple secure places.
16. Now that the Satellite is populated with standard Red Hat channels and packages and all clients
are connected to it, you may begin creating and serving custom channels and packages. Once the
custom RPMs are developed, you can import them into the Satellite using the RHN Push and
add custom channels to store them through the Satellite’s website. Refer to the RHN Channel
Management Guide for details.
6 Chapter 1. Introduction
Chapter 2.
Requirements
These requirements must be met before installation.
2.1. Software Requirements
To perform an installation, the following software components must be available:
• Base operating system — RHN Satellite Server is supported with Red Hat Enterprise Linux AS 2.1
Update 5 or later, Red Hat Enterprise Linux AS 3 Update 3 or later, or Red Hat Enterprise Linux
AS 4 only. The operating system can be installed from disc, local ISO image, kickstart, or any of
the methods supported by Red Hat but must contain certain packages not included in a standard
installation.
• Satellite installation disc or ISO — this contains the RHN Satellite Server Installation Program.
• Channel content — All software packages and data exported for all entitled Red Hat channels. This
content may be loaded directly on the Satellite after installation using the RHN Satellite Synchronization Tool or obtained from your Red Hat representative if synchronization isn’t possible, such
as in a disconnected environment.
Important
If you plan to obtain Monitoring-level service, you must install your RHN Satellite Server on Red Hat
Enterprise Linux AS 3 Update 3 or Red Hat Enterprise Linux AS 4. These are the only supported
base operating systems for Satellites serving Monitoring-entitled systems.
Each version of Red Hat Enterprise Linux AS requires additional packages to support RHN Satellite
Server. The following sections identify Red Hat’s recommended methods for obtaining the desired
package set for each version of Red Hat Enterprise Linux AS. Installing packages other than those
specified can lead to package conflicts.
2.1.1. Red Hat Enterprise Linux AS 4 Packages
To install RHN Satellite Server on Red Hat Enterprise Linux AS 4, first obtain the required packages
in one of the following ways.
Warning
Security-enhanced Linux (SELinux) must be disabled in Red Hat Enterprise Linux AS 4 prior to
installation of RHN Satellite Server. To do this during CD or ISO image installation, select Disabled
when presented with options for SELinux support. To do this for kickstart installation, include the
command selinux --disabled or wait for the install to complete, edit the /etc/selinux/config
file to read SELINUX=disabled and reboot the system.
When installing Red Hat Enterprise Linux AS 4 via CD or ISO image, select the following package
groups:
8 Chapter 2. Requirements
• Development Tools
• Legacy Software Development
Then after operating system installation, register the system with RHN and use the Red Hat Update
Agent to install the outstanding packages with the following command:
up2date newt-perl perl-DateManip perl-libxml-enno perl-Parse-Yapp /
perl-Time-HiRes PyXML gd xorg-x11-deprecated-libs
Once updated, delete the Red Hat Enterprise Linux AS 4 system profile from RHN, as it will be
reregistered during Satellite installation.
When kickstarting Red Hat Enterprise Linux AS 4, specify the following packages and groups:
• @ Base
• @ Compatibility Arch Support
• @ Development Tools
• @ Legacy Software Development
• newt-perl
• perl-DateManip
• perl-libxml-enno
• perl-Parse-Yapp
• perl-Time-HiRes
• PyXML
2.1.2. Red Hat Enterprise Linux AS 3 Update 3 Packages
To install RHN Satellite Server on Red Hat Enterprise Linux AS 3 Update 3, first obtain the required
packages in one of the following ways.
When installing Red Hat Enterprise Linux AS 3 Update 3 via CD or ISO image, select the following
package groups:
• Web Server
• Mail Server
• Development Tools
• Legacy Software Development
Then after operating system installation, register the system with RHN and use the Red Hat Update
Agent to install the outstanding packages with the following command:
up2date perl-CGI perl-libwww-perl perl-URI perl-XML-Parser perl-DateManip /
perl-XML-Dumper perl-libxml-enno perl-Parse-Yapp perl-XML-Encoding
Once updated, delete the Red Hat Enterprise Linux AS 3 Update 3 system profile from RHN, as it
will be reregistered during Satellite installation.
When kickstarting Red Hat Enterprise Linux AS 3 Update 3, specify the following packages and
groups:
• @ Base
Chapter 2. Requirements 9
• @ Server
• @ Development Tools
• @ Legacy Software Development
• perl-CGI
• perl-Time-HiRes
2.1.3. Red Hat Enterprise Linux AS 2.1 Update 5 Packages
To install RHN Satellite Server on Red Hat Enterprise Linux AS 2.1 Update 5, first obtain the required
packages in one of the following ways.
When installing Red Hat Enterprise Linux AS 2.1 Update 5 via CD or ISO image, select the following
package groups:
• Network Support
• Web Server
• Software Development
• Advanced Server
• Messaging and Web Tools
• Utilities
This satisfies the base operating system requirements. Unlike Red Hat Enterprise Linux AS 3 Update
3 and Red Hat Enterprise Linux AS 4, you do not have to run up2date to install additional packages.
When kickstarting Red Hat Enterprise Linux AS 2.1 Update 5, specify the following package groups:
• @ Advanced Server
• @ Base
• @ Messaging and Web Tools
• @ Software Development
• @ Utilities
• @ Web Server
2.2. Hardware Requirements
The following hardware configuration is required for the two types of RHN Satellite Server:
Stand-Alone Database Embedded Database
Required - Pentium III processor, 1.26GHz,
512K cache or equivalent
Required - Pentium III processor, 1.26GHz,
512K cache or equivalent
Recommended - Pentium IV processor, 2.4GHz
dual processor, 512K cache or equivalent
Recommended - Pentium IV processor, 2.4GHz
dual processor, 512K cache or equivalent
Required - 2 GB of memory Required - 2 GB of memory
Recommended - 4 GB of memory Strongly recommended - 4 GB of memory
10 Chapter 2. Requirements
Stand-Alone Database Embedded Database
3 GB storage for base install of Red Hat
Enterprise Linux AS
3 GB storage for base install of Red Hat
Enterprise Linux AS
6 GB storage per channel, in the
/var/satellite directory by default but
configurable at install
6 GB storage per channel, in the
/var/satellite directory by default but
configurable at install
Recommended - an external SAN for more
reliable backups
Recommended - an external SAN for more
reliable backups
38 GB storage for the database repository, in the
/rhnsat partition (local storage only)
Strongly recommended - a SCSI drive
connected to a level 5 RAID
Separate partition (or better, a separate set of
physical disks) for storing backups. This can be
any directory specifiable at backup time.
Table 2-1. Stand-Alone Database and Embedded Database Satellite Hardware Requirements
The following hardware configuration is required for the Stand-Alone Database:
• Two processors
• 2 GB of memory
See Section 2.3 Database Requirements for instructions on estimating the tablespace of the database
and setting its environment variables.
Keep in mind, the frequency in which client systems connect to the Satellite is directly related to load
on the Apache HTTP Server and the database. If you do reduce the default interval of four hours (or
240 minutes), as set in the /etc/sysconfig/rhn/rhnsd configuration file of the client systems,
you will increase the load on those components significantly.
Additional hardware requirements include:
• The Stand-Alone Database must not run on the same server as the RHN Satellite Server.
• The package repository may be any large storage device easily and securely accessed by the other
components. The space requirements depend on the number of packages that will be stored. Default
Red Hat channels contain approximately 3 GB of packages each, and that size grows with each
synchronization; customers must also account for the space requirements of packages in their own
private channels. Whatever storage solution the customer chooses, its mount point may be defined
during the installation process.
If you are installing RHN Satellite Server with Embedded Database, skip to Section 2.4 Additional
Requirements.
2.3. Database Requirements
This section applies only to RHN Satellite Server with Stand-Alone Database as the requirements
for the Embedded Database are included in the Satellite machine’s hardware requirements. Red Hat
supports RHN Satellite Server 3.7 installations in conjunction with Oracle 9i R2. The Stand-Alone
Database must not run on the same server as the RHN Satellite Server.
A single 6 GB tablespace is recommended as more than sufficient for most installations. It is possible
for many customers to function with a smaller tablespace. An experienced Oracle database admin-
Chapter 2. Requirements 11
istrator (DBA) will be necessary to assess sizing issues. The following formula should be used to
determine the required size of your database:
• 192 KB per client system
• 64 MB per channel
For instance, an RHN Satellite Server containing 10 channels serving 10,000 systems would require
1.92 GB for its clients and 640 MB for its channels. If custom channels are to be established for testing
and staging of packages, they must be included in this formula.
Keep in mind, the database storage needs may grow rapidly, depending upon the variance of the
following factors:
• The number of public Red Hat packages imported (typical: 5000)
• The number of private packages to be managed (typical: 500)
• The number of systems to be managed (typical: 1000)
• The number of packages installed on the average system (typical: 500)
Although you should be generous in your database sizing estimates, you need to consider that size
does affect the time to conduct backups and adds load to other system resources. If the database is
being shared, its hardware and spacing is entirely dependent on what else is using it.
The Oracle database should have a user assigned to RHN Satellite Server with full DDL and DML
access to that user’s default tablespace. The user will need standard connection information for the
database at the time of installation.
The precise access levels required by the Oracle user are as follows:
• ALTER SESSION
• CREATE SEQUENCE
• CREATE SYNONYM
• CREATE TABLE
• CREATE VIEW
• CREATE PROCEDURE
• CREATE TRIGGER
• CREATE TYPE
• CREATE SESSION
Additional database requirements include:
• Security Identifier (SID)
• Listener Port
• Username
• Uniform Extent Size
• Auto Segment Space Management
• UTF-8 character set
The disk layout on the database machine is independent of the RHN Satellite Server and entirely up
to the customer.
12 Chapter 2. Requirements
2.4. Additional Requirements
The following additional requirements must be met before the RHN Satellite Server installation:
• Full Access
Client systems need full network access to the RHN Satellite Server solution’s services and ports.
• Firewall Rules
The RHN Satellite Server solution can be firewalled from the Internet, but it must be able to issue
outbound connections to rhn.redhat.com and xmlrpc.rhn.redhat.com on ports 80 and 443.
• Synchronized System Times
There is great time sensitivity when connecting to a Web server running SSL (Secure Sockets
Layer); it is imperative the time settings on the clients and server be reasonably close together so
the SSL certificate does not expire before or during use. For this reason, Red Hat requires the Satellite and all client systems to use Network Time Protocol (NTP). This also applies to the separate
database machine in RHN Satellite Server with Stand-Alone Database, which must also be set to
the same time zone as the Satellite.
• Fully Qualified Domain Name (FQDN)
The system upon which the RHN Satellite Server will be installed must resolve its own FQDN
properly. If this is not the case, cookies will not work properly on the website.
• Functioning Domain Name Service (DNS)
For the RHN Satellite Server’s domain name to be resolved by its clients, it and they must all be
linked to a working DNS server in the customer environment.
• An Entitlement Certificate
The customer will receive, via email from the sales representative, a signed Entitlement Certificate
explaining the services provided by Red Hat through RHN Satellite Server. This certificate will be
required during the installation process.
• A Red Hat Network Account
Customers who will be connecting to the central Red Hat Network Servers to receive incremental
updates will need an external account with Red Hat Network. This account should be set up at the
time of purchase with the sales representative.
• Backups of Login Information
It is imperative customers keep track of all primary login information. For RHN Satellite Server, this
includes usernames and passwords for the Organization Administrator account on rhn.redhat.com,
the primary administrator account on the Satellite itself, SSL certificate generation, and database
connection (which also requires a SID, or net service name). Red Hat strongly recommends this
information be copied onto two separate floppy disks, printed out on paper, and stored in a fireproof
safe.
In addition to these requirements, it is recommended the RHN Satellite Server be configured in the
following manner:
• The entire RHN Satellite Server solution should be protected by a firewall if the Satellite will be
accessing, or be accessed via the Internet. An Internet connection is not required for RHN Satellite Servers running in completely disconnected environments as this feature instead uses Channel
Content ISOs that can be downloaded to a separate system to synchronize the Satellite with the
central Red Hat Network Servers. All other RHN Satellite Servers should be synchronized directly
over the Internet.
• All unnecessary ports should be firewalled off. Client systems connect to RHN Satellite Server over
ports 80 and 443 only. In addition, if you plan to enable the pushing of actions from the Satellite
Chapter 2. Requirements 13
to client systems, as described in Section 8.10 Enabling Push to Clients, you must allow inbound
connections on port 5222. Finally, if the Satellite will also push to an RHN Proxy Server, you must
also allow inbound connections on port 5269.
• No system components should be directly, publicly available. No user other than the system admin-
istrators should have shell access to these machines.
• All unnecessary services should be disabled using ntsysv or chkconfig.
• The httpd service should be enabled.
• If the Satellite will serve Monitoring-entitled systems and you wish to acknowledge via email the
alert notifications you receive, you must configure sendmail to properly handle incoming mail as
described in Section 4.3 Sendmail Configuration.
Finally, you should have the following technical documents in hand for use in roughly this order:
1. The RHN Satellite Server Installation Guide — This guide, which you are now reading, provides
the essential steps necessary to get an RHN Satellite Server up and running.
2. The RHN Client Configuration Guide — This guide explains how to configure the systems to
be served by an RHN Proxy Server or RHN Satellite Server. (This will also likely require referencing The RHN Reference Guide, which contains steps for registering and updating systems.)
3. The RHN Channel Management Guide — This guide identifies in great detail the recommended
methods for building custom packages, creating custom channels, and managing private Errata.
4. The RHN Reference Guide — This guide describes how to create RHN accounts, register and
update systems, and use the RHN website to its utmost potential. This guide will probably come
in handy throughout the installation and configuration process.
14 Chapter 2. Requirements
Chapter 3.
Example Topologies
The RHN Satellite Server can be configured in multiple ways. Select one method depending on the
following factors:
• The total number of client systems to be served by the RHN Satellite Server.
• The maximum number of clients expected to connect concurrently to the RHN Satellite Server.
• The number of custom packages and channels to be served by the RHN Satellite Server.
• The number of RHN Satellite Servers being used in the customer environment.
• The number of RHN Proxy Servers being used in the customer environment.
The rest of this chapter describes possible configurations and explains their benefits.
3.1. Single Satellite Topology
The simplest configuration is to use a single RHN Satellite Server to serve your entire network. This
configuration is adequate to service a medium-size group of clients and network.
The disadvantage of using one RHN Satellite Server is that performance will be compromised as the
number of clients requesting packages grows.
Figure 3-1. Single Satellite Topology
3.2. Multiple Satellite Horizontally Tiered Topology
For very large networks, a more distributed method may be needed, such as having multiple RHN
Satellite Servers horizontally tiered configuration and balancing the load of client requests.
Additional maintenance is the biggest disadvantage of this horizontal structure.
16 Chapter 3. Example Topologies
Figure 3-2. Multiple Satellite Horizontally Tiered Topology
3.3. Satellite-Proxy Vertically Tiered Topology
An alternative method to balance load is to install RHN Proxy Servers below a RHN Satellite Server
that connect to the Satellite for RPMs from Red Hat Network and custom packages created locally. In
essence, the Proxies act as clients of the Satelllite.
This vertically tiered configuration requires that channels and RPMs be created only on the RHN
Satellite Server. In this manner, the Proxies inherit and then serve packages from a central location.
For details, refer to the RHN Channel Management Guide.
Similarly, you should make the Proxies’ SSL certificates clients of the Satellite while also setting them
to serve the actual client systems. This process is described in the RHN Client Configuration Guide.
Figure 3-3. Satellite-Proxy Vertically Tiered Topology
Loading...