How it Works
Red Digital Cinema
Loading...
Epic 6.3
Operation Guide
258 pgs28.41 Mb0
Table of contents
Loading...

Red Digital Cinema Epic 6.3 Operation Guide

WEAPON/EPIC-W (HELIUM 8K S35)
OPERATION GUIDE
WEAPON | EPIC-W
HELIUM 8K S35 | V6.3
RED.COM

TABLE OF CONTENTS

Table of Contents 2
Disclaimer 4 Copyright Notice 4 Trademark Disclaimer 4 Compliance Statements 4 Safety Instructions 6 Battery Storage and Handling 8 Shipping Disclaimer 9
1 RED Product Introduction 10
Read Before You Shoot 10 R3D File Format and REDCODE 10 Shoot For Video and Stills 11 Post Production with REDCINE-X PRO 11 HDRX and MAGIC MOTION 11 Additional Resources 12
2 Camera System Components 13
Additional Resources 13 BRAIN 13 REDMINI-MAG System 18 Expanders 19 Power Modules 25 REDBatteries and Chargers 26 Displays and Electronic Viewfinders 27 LEMOAdaptors 32 Camera Control Modules 33 Lens Mounts 36 Interchangeable OLPFs 37 Rails, Mounts, Tactical Gear, and Cables 37
3 Basic Operations 38
Power Operations 38 Configure Your Camera 41 Interchangeable OLPF System 47 Use a Tripod or Monopod 49 Video Monitor Outputs 50 Record 51
4 Basic Menus and Controls 53
GUI Menu Introduction 53 Upper Status Row (Basic Menu) 54 Live Action Area 58 Lower Status Row 60
Navigation Controls 66
5 Advanced Menus 75
Advanced Menus Overview 75 Access the Advanced Menus 75 Settings Menu 76 Media Menu 137 Playback Menu 138 Power Menu 143 HDRX Menu 144 Focus Menu 145 Exposure Assist Menu 151 Presets Menu 153
6 Record and Monitor Audio 156
Audio Overview 156 Set Up Audio 156 Control 157 Mix 160 Audio Output Options 160 Audio Meter (VU Meter) 161 Audio During Playback 162
7 Timecode, Genlock, Multi-Camera Setup 163
Timecode 163 Genlock 166 Master/Slave Operation 170 Set Up Stereo/3D Configuration 175 Camera Array 176 Set Up Motion Control (MoCo) 177 Compatible Timecode Devices 178 Compatible Genlock Devices 179
8 Upgrade Camera Firmware 180
Verify Current Camera Firmware 180 Upgrade Camera Firmware 180
9 Camera System Maintenance 182
BRAIN and Accessory Exterior Surfaces 182 Clean EVF Screen 183 Clean LCD Screens 183 Water Damage 184 Adjust Back Focus 184
C OPY R I GHT © 2 016 RED . C O M , I NC 955 - 0 1 38_V 6.3, REV - B | 2
10 Troubleshoot Your Camera 185
Perform a Stress Test 185 General Troubleshooting 186 Error Messages 192 Media Bay and RED MINI-MAG Issues 194 Back Focus Lock 195
A Technical Specifications 197
WEAPON HELIUM 8K S35 Technical Specifications 197
EPIC-W Technical Specifications 200
B Mechanical Drawings 203
WEAPON8K S35 BRAIN 203 EPIC-W BRAIN 208
C Input/Output Connectors 213
DSMC2 Base Expander 214 DSMC2 V-Lock I/O Expander 215 DSMC2 REDVOLT Expander 216 DSMC2 Jetpack Expander 217 DSMC2 Jetpack-SDI Expander 218 Record/Monitor Out Ports 219 Communication Ports 221 Audio Ports 231 Power Ports 233
D Lens Mounts and Lenses 240
Lens Mounts 240 Lenses 242
E Default Key Functions 254
Default Keys 254
F Menu Map 257
C OPY R I GHT © 2 016 RED . C O M , I NC 955 - 0 1 38_V 6.3, REV - B | 3

DISCLAIMER

RED® has made every effort to provide clear and accurate information in this document, which is provided solely for the user’s information. While thought to be accurate, the information in this document is provided strictly “as is” and RED will not be held responsible for issues arising from typographical errors or user’s interpretation of the language used herein that is different from that intended by RED. All safety and general information is subject to change as a result of changes in local, federal or other applicable laws.
RED reserves the right to revise this document and make changes from time to time in the content hereof without obligation to notify any person of such revisions or changes. In no event shall RED, its employees or authorized agents be liable to you for any damages or losses, direct or indirect, arising from the use of any technical or operational information contained in this document.
For comments or questions about content in this document, please send a detailed email to OpsGuides@red.com.

COPYRIGHT NOTICE

COPYRIGHT© 2016 RED.COM, INC. All trademarks, trade names, logos, icons, images, written material,
code, and product names used in association with the accompanying product are the copyrights, trademarks, or other intellectual property owned and controlled exclusively by RED.COM, INC. For a comprehensive list, please see www.red.com/trademarks.

TRADEMARK DISCLAIMER

All other company, brand, and product names are trademarks or registered trademarks of their respective holders. RED has no affiliation to, is not associated with or sponsored by, and has no express rights in third-party trademarks. Adobe and Adobe Premiere Pro are registered trademarks of Adobe Systems Incorporated. AJA is a registered trademark of AJA Video Systems, Inc. Cooke and S4/i are registered trademarks of Cooke Optics Limited. DaVinci is a registered trademark of Blackmagic Design in the U.S. and other countries. Distagon, Makro- Planar, and Otus are registered trademarks of Carl Zeiss AG. Fujinon is a registered trademark of FUJIFILM CORPORATION. HDMI is a registered trademark of HDMI Licensing LLC in the United States and other countries. Leica is a registered trademark of Leica Microsystems. Loctite is a registered trademark of Henkel AG & Company KGaA. Nikkor and Nikon are registered trademarks of Nikon Corporation. Canon is a registered trademark of Canon, U.S.A. Apple, Macintosh, Final Cut Pro, and QuickTime are registered trademarks of Apple Inc. in the U.S. and other countries. Windex is a registered trademark of S. C. Johnson & Son, Inc. Windows is a registered trademark of Microsoft Corporation. LEMO is a registered trademark of LEMO USA. Sony is a registered trademark of Sony Corporation. TORX is a registered trademark of Acument Intellectual Properties, LLC in the United States or other countries. IOS is a registered trademark of Cisco in the U.S. and other countries. Avid is a registered trademark of Avid Technology, Inc. DaVinci Resolve is a registered trademark of Blackmagic Design in the U.S. and other countries. EDIUS Pro is a registered trademark of Grass Valley. Vegas Pro is a registered trademark of Sony Creative Software. IDX is a registered trademark of IDX Company, Ltd.

COMPLIANCE STATEMENTS

INDUSTRIAL CANADA EMISSION COMPLIANCE ST ATEMENTS
This device complies with Industry Canada license- exempt RSS standards RSS 139 and RSS 210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003. Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for
help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the users authority to operate this equipment.
NOTE: This device complies with Part 15 of the FCC Rules. Operations subjected to the following two conditions (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesirable interference.
CAUTION: Exposure to Radio Frequency Radiation.
C OPY R I GHT © 2 016 RED . C O M , I NC 955 - 0 1 38_V 6.3, REV - B | 4
The device shall be used in such a manner that the potential for human contact is minimized
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio- frequency wireless devices because there signals could interfere with critical aircraft instruments.
CAUTION: If the device is changed or modified without permission from RED, the user may void his or her authority to operate the equipment.
AUSTRALIA AND NEW ZEALAND STATEMENTS
RED declares that the radio equipment described in this document comply with the following international standards.
IEC 60065 - Product Safety ETSI EN 300 328 - Technical requirement for radio equipment
RED declares digital devices described in this document comply with the following Australian and New Zealand standards.
AS/NZS CISPR 22 – Electromagnetic Interference AS/NZS 61000.3.2 – Power Line Harmonics AS/NZS 61000.3.3 – Power Line Flicker
JAPAN STATEMENTS
This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment
according to the instruction manual.
EUROPEAN UNION COMPLIANCE STATEMENTS
RED declares that the radio equipment described in this document comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the
European Community. Compliance with this directive implies conformity to the following
European Norms (in brackets are the equivalent international standards).
EN 60065 (IEC 60065) – Product Safety ETSI EN 300 328 Technical requirement for radio equipment ETSI EN 301 489 General EMC requirements for radio
equipment.
INFORMATION
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Product Family Standards.
EN 55022 (CISPR 22) – Electromagnetic Interference EN 55024-1 (CISPR 24) – Electromagnetic Immunity EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics EN 61000-3-3 (IEC610000) – Power Line Flicker EN 60065 (IEC60065) – Product Safety
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The Waste Electrical and Electronic Equipment (WEEE) mark applies only to countries within the European Union (EU) and Norway. This symbol on the product and accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some
countries you may be able to return your products to your local retailer upon purchase of an equivalent new product.
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with you national legislation.
For business users in the European Union, if you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
C OPY R I GHT © 2 016 R E D.COM, I N C 9 5 5-013 8 _V6 . 3 , R EV-B | 5
USAGE RESTRICT IONS FOR PRODUCTS THAT INCORPORATE REDLINK
Products that fall into this category are denoted by inclusion of the Class 2 identifier symbol (exclamation mark in a circle) accompanying the CE Mark on the products regulatory label, example to the left.
FRANCE
Usage Restrictions - Geographic Area Where
Restriction Applies : France For mainland France
2.400 - 2.4835 GHz (Channels 1-16) authorized for indoor use
2.400 - 2.454 GHz (Channels 1-10) authorized for outdoor use
Restrictions d’utilisation - Zone géographique où les restrictions s’appliquent : France
Pour la France métropolitaine
2.400 - 2.4835 GHz (Canaux 1 à 16) autorisé en usage intérieur
2.400 - 2.454 GHz (canaux 1 à 10) autorisé en usage extérieur
NORWAY
This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund
Dette gjelder ikke for det geografiske området innenfor en radius av 20 km fra sentrum av Ny-Ålesund
RESPONSIBLE PARTY
RED Digital Cinema 34 Parker Irvine, CA 92618 USA

SAFETY INSTRUCTIONS

DO NOT use the camera or accessories near water. Avoid exposing your camera to moisture. The unit is not waterproof, so contact with water could cause permanent damage to the unit as well as electric shock and serious injury to the user. DO NOT use the camera in the rain or under other conditions with high moisture without appropriate protection, and immediately remove power source if camera or accessories are exposed to moisture.
WARNING: To reduce the risk of fire or electric shock, do not expose the camera to rain or moisture.
DO NOT expose the camera to laser beams, as laser beams may damage the sensor.
DO NOT expose your camera to excessive vibration or impact (shock). Be careful not to drop your camera. Internal mechanisms may be damaged by severe shock. Mechanical alignment of optical elements may be affected by excessive vibration.
ELECTROMAGNETIC INTERFERENCE: The use of devices using radio or other communication waves may result in the malfunction or interference with the unit and/or with audio and video signals.
Clean only using a dry cloth. When cleaning your camera, remember that it is not waterproof and moisture can damage electronic circuitry. DO NOT rinse or immerse any element of the camera, lens or other accessory, keep them dry at all times. DO NOT use soaps, detergents, ammonia, alkaline cleaners, and abrasive cleaning compounds or solvents. These substances may damage lens coatings and electronic circuitry.
Maintain sufficient ventilation—DO NOT block any ventilation openings or obstruct cooling fan airflow.
CAUTION: Proper camera ventilation requires a minimum 0.5" (1.25 cm) clearance between the camera ventilation openings and external surfaces. Verify that objects that can block the fan intake and exhaust ports do not impede airflow. Failure to permit adequate airflow may result in overheating of the camera, degraded operation and in extreme situations, damage to the camera.
C OPY R I GHT © 2 016 R E D.COM, I N C 9 5 5-013 8 _V6 . 3 , R EV-B | 6
DO NOT operate or store near any heat sources such as radiators, heat registers, stoves, or any other apparatus that produce heat. Store in a protected, level and ventilated place. Avoid exposure to temperature extremes, damp, severe vibration, strong magnetic fields, direct sunlight or local heat sources during storage. Remove any batteries from the camera before storage. Recommended storage and usage temperatures for your camera, lenses and other accessories are:
Operating range: 0°C to 40°C (32°F to 104°F) Storage range: –20°C to 50°C (–4°F to 122°F)
If there are any performance issues with your camera or accessories when operating within this temperature range, please file a support ticket on https://support.red.com.
Modules and expanders, expanders, and lens mounts are NOT HOT SWAPPABLE, meaning you cannot remove or install these items while the camera is turned on. Before installing or removing these items, you MUST turn off the camera. Failure to do so may result in damage to the item or camera that is not covered under warranty.
DO NOT bypass the third prong of the grounding-type plug on the power cord of the DSMC AC Power Adaptor. A grounding-type plug has two blades and a third “grounding” prong. The third prong is provided for your safety. A grounding-type plug shall be connected to an outlet with a protective earthen connection. If the grounding-type plug does not fit into your outlet, do not attempt to modify the plug or outlet, consult a qualified electrician.
Protect all power cords from being pinched, walked on or driven over by a vehicle. Replace any power cords suspected of sustaining damage due to crushing or other forms physical damage.
WARNING: DO NOT expose the battery to excessive heat.
WARNING: Danger of explosion if an incorrect battery is charged with the RED Charger or is used to power the camera and accessories. Replace only with the same or equivalent type battery.
CAUTION: Refer all service and repair to qualified RED service personnel. To reduce the risk of electric shock, and damage to the camera or accessories, DO NOT attempt to perform any servicing other than any procedures that are recommended in the operating instructions.
INDOOR USE ONLY: Products marked with this symbol are designed for use indoors only.
Products marked with this symbol are class 2 devices. These devices are not provided with a grounding type plug.
CAUTION: The power cord plug for the DSMC AC Power Adaptor is used as the power disconnect. To disconnect all power from the DSMC AC Power Adaptor, unplug the power cord plug from the wall outlet. During use, the power cord plug should remain easily accessible at all times.
Lithium-ion batteries may be subject to special handling requirements pursuant to federal and local laws. Please refer to specific shipping instructions included with your battery regarding proper transport of your battery. Do not handle your battery if it is damaged or leaking. Disposal of batteries must be in accordance with local environmental regulations. For example, California law requires that all rechargeable batteries must be recycled by an authorized recycle center. Storing batteries fully charged or in high temperature conditions may permanently reduce the life of the battery. Available battery capacity may also be temporarily lessened after storage in low temperature conditions.
C OPY R I GHT © 2 016 R E D.COM, I N C 9 5 5-013 8 _V6 . 3 , R EV-B | 7

BATTERY STORAGE AND HANDLING

WARNING: Failure to read, understand, and
follow these instructions may result in overheating, chemical leakage, smoke emission, fire, or other potentially harmful results.
Always follow proper battery handling and storage practices. Improper handling and/or failure to abide by proper storage instructions may cause permanent damage to batteries, or degrade battery charge holding capacity. Improper handling practices or failure to comply with instructions may also put you at risk.
Lithium-Ion batteries, like the REDVOLT®, REDVOLT XL, and RED BRICK®, self-discharge over time. When storing for long periods of time, store batteries separately from the camera or charger and remember to charge batteries to a capacity level of 40% to 60%. If batteries will be stored for long periods of time, RED recommends that you check the charge level at least once every six (6) months, and recharge batteries to a capacity level of 40% to 60%.
When not in use, remove the battery from the camera or charger and store the battery in a cool, dry place. Avoid extreme hot temperatures (such as inside a hot car), corrosive gas, and direct sunlight. The optimal storage temperature for batteries is between –20°C to 20°C (–4°F to 68°F).
WARNING: Batteries stored in a discharged state for long periods of time may self-discharge and lose the ability to hold a charge.
WARNING: If recharging operation fails to complete even when a specified recharging time has elapsed, immediately stop further recharging.
DO NOT store batteries in a fully charged state for extended DO NOT store batteries in a fully charged state for extended periods of time.
DO NOT store batteries in a fully discharged state for extended periods of time.
DO NOT store batteries in the camera, in a camera module, or in a charger for extended periods of time.
DO NOT use batteries for purposes other than their intended use. DO NOT store batteries in extreme hot or cold temperatures. DO NOT store batteries in direct sunlight. DO NOT use third-party chargers with your RED batteries. DO NOT disassemble or modify the battery. DO NOT overcharge batteries. Overcharging may increase
internal temperature beyond the recommended limits and cause permanent damage to the battery.
DO NOT connect the positive (+) and negative (–) terminals to a metal object such as a wire.
DO NOT transport or store the battery together with metal objects such as jewelry, hairpins, etc. as they may generate heat if they come into contact with the battery.
DO NOT discard the battery into fire or heat. DO NOT store, use, or recharge the battery near a heat source
such as a fire or a heater. DO NOT allow the battery to get wet. DO NOT pierce the battery with pointed or other sharp objects. DO NOT step on, throw, or strike the battery with a hammer. DO NOT use a battery that appears to be deformed or damaged. DO NOT directly solder the battery. DO NOT put the battery into a microwave oven or a pressurized
container. DO NOT use or subject the battery to intense sunlight or hot
temperatures such as in a car in hot weather. DO NOT use it in a location where static electricity may be
present. DO NOT exceed the recharging temperature range of 0˚C to 40˚C
(32˚F to 104˚F). RED recommends that you only use RED chargers to recharge
RED batteries. Store the battery in a location where children cannot reach it. If the battery leaks or gives off a bad odor, discontinue use
immediately. If the battery gives off an odor, generates heat, becomes
discolored or deformed, or in any way appears abnormal during use, recharging or storage, immediately remove it from the equipment or battery charger and discontinue use.
If electrolyte begins leaking from the battery and comes into contact with your skin or clothing, immediately wash it away with running water. Failure to do this may result in skin inflammation.
If the battery leaks and the electrolyte reaches the eyes, do not rub them. Instead, rinse the eyes with clean running water and immediately seek medical attention. Failure to do this may result in eye injury.
If you find discoloration, a bad odor due to leakage, overheating and/or other irregularities when using the battery for the first time, contact your Bomb Squad representative immediately.
NOTE: For more information regarding RED battery charging and instructions for care, please refer to our Terms and Conditions.
C OPY R I GHT © 2 016 R E D.COM, I N C 9 5 5-013 8 _V6 . 3 , R EV-B | 8

SHIPPING DISCLAIMER

Shipment of Lithium Ion cells and batteries is subject to national and international shipping requirements. A Class 9 Certified shipper is required to transport these products within the United States. REDVOLT, REDVOLT XL, and RED BRICK batteries are considered Dangerous Goods. Other products such as REDVOLT AA and RED Li
7.2V batteries may also be classified as Dangerous Goods when purchased in bulk. Applicable laws prohibit the shipping of batteries that are physically damaged. We urge you to look into the formal rules and regulations of shipping Class 9 Dangerous Goods prior to preparing your shipment. For more information on these regulations, please visit www.iata.org and www.dot.gov.
For more information, see our FAQs for Dangerous Goods (Regulated
Items).
C OPY R I GHT © 2 016 R E D.COM, I N C 9 5 5-013 8 _V6 . 3 , R EV-B | 9
RED PRODUCT
1
The WEAPON® HELIUM™8K S35 and RED EPIC-W™ HELIUM 8K S35 cameras are part of the second-generation Digital Still and Motion Camera (DSMC2™) system. The DSMC2 family, a subset of the DSMC® family, includes WEAPON, EPIC-W, SCARLET-W, and RED RAVEN®. With an ultra-high megapixel count, high frame rate, significant processing power, high dynamic range, and the advantages of a raw file format, each camera offers the ability to simultaneously capture video and stills.
This guide is for WEAPON HELIUM 8K S35 and EPIC-W HELIUM 8K S35 only. This section introduces the imaging capabilities and advanced features of the WEAPON HELIUM 8K S35 and EPIC-W HELIUM 8K S35 system. For information about other cameras, go to RED Downloads at www.red.com/downloads.
The WEAPON HELIUM 8K S35 and EPIC-W HELIUM 8K S35 system includes the following cameras (organized by sensor type):
SENSOR TYPE CAMERA
HELIUM 8K S35 RED EPIC-W with HELIUM 8K S35 sensor
INTRODUCTION
WEAPON with HELIUM 8K S35 sensor WEAPON with HELIUM 8K S35 sensor [Limited Edition]

READ BEFORE YOU SHOOT

Read this operation guide carefully and in its entirety before assembling or operating your camera or other RED accessories. In addition to this document, RED offers the following operation guides for the camera system:
DSMC Power Operation Guide DSMC Media Operation Guide
To download RED operation guides, go to RED Downloads at www.red.com/downloads.

R3D FILE FORMAT AND REDCODE

All videos and frames are recorded to the R3D® file format. The R3D file format was developed by RED to provide an efficient and manageable RAW video data format that promotes advanced post production editing capabilities. In the R3D file format, the digital image received from the sensor is formatted as a pixel-defect corrected (but in all other aspects unprocessed) 16-bit per pixel RAW data frame. Each RAW frame, or sequence of RAW frames in a clip, is compressed using a proprietary wavelet based REDCODE® RAW compression, then stored to a RED MINI-MAG®.
RAW data is recorded independently of any RGB domain color processing such as ISO, White Balance, or other RGB color space settings. Instead, color parameters are saved as reference metadata; that is, color is not burned into the recorded RAW data. This recording technique promotes flexibility in RGB color processing, which can be deferred to post production or adjusted in the field, without affecting the recorded RAW data image quality or dynamic range.
REDCODE is a visually lossless, wavelet-based compression codec that reduces R3D RAW files into a manageable size, allowing longer recording times on media. The ability to compress RAW data is one of the significant technologies that RED has brought to the industry.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 0
For more information, see the DSMC Media Operation Guide, available at www.red.com/downloads. NOTE: REDCINE-X PRO® can create and export .RMD “Look” files which may then be imported as camera monitor
path color processing presets. This information is stored as reference metadata, so that these color processing choices can be the default values used in post production. For more information, go to "Looks" on page154.

SHOOT FOR VIDEO AND STILLS

High resolution video, such as the digital footage captured by the camera, has surpassed the detail necessary to produce professional full-sized prints. Because of the ability to record at high frame rates and resolution, the camera is ideally suited to capture video and still images, simultaneously.
The camera is equipped with a Stills mode that makes it easier to capture stunning images. With presets optimized for stills and Swipe-Up Shortcuts for the RED Touch display, switching from Motion mode to Stills mode is seamless. Using REDCINE-X PRO, or other editing applications supporting the RED SDK, you can pull full resolution still images from R3D files.

POST PRODUCTION WITH REDCINE-X PRO

REDCINE-X PRO is a professional one-light coloring toolset, equipped with an integrated timeline and a post effects software collection that provides the ideal environment to review recorded footage, edit metadata, organize projects, and prepare your R3D files. Use either REDCINE-X PRO or a compatible third-party non-linear editing (NLE) application to edit R3D files.
RED TETHER, included in REDCINE-X PRO, allows you to record footage from your camera directly to a computer or an external drive. Using tethering bypasses the need to record to an SSD and offload to a computer later, saving you time. The latest version of REDCINE-X PRO and the REDCINE-X PROOperation Guide are available for download at
RED Downloads at www.red.com/downloads.
NOTE: RED TETHER is included in REDCINE-X PRO build 35 or later.

HDRX AND MAGIC MOTION

HDRX
HDRX® extends dynamic range up to six (6) stops by simultaneously capturing two (2) images of identical resolution and frame rate. The first image is a normally exposed track (A-track), while the second is an underexposed track (X­track) with an exposure value that reflects the additional stops of highlight protection. These tracks are “motion­conjoined” during recording, leaving no time gap between the two (2) exposures. This is different from traditional alternating exposures, which have small gaps between tracks, producing unwanted motion tracks.
MAGIC MOTION
MAGIC MOTION is a post production method that combines two (2) HDRX tracks to create an image with both natural motion blur (from the A-track) and sharper reference (the X-track). MAGIC MOTION produces an image with an extraordinary dynamic range that is not available with any other motion capture camera.
Shooting at 24 fps with a 180° (1/48 sec) shutter on traditional film or digital cameras produces motion blur throughout, which is not the way the human eye observes motion. For example, ask someone to swing their arm. What you would observe in a traditional recording of this action is constant motion blur until the arm stops. However, what your eye sees is both motion blur and a sharper reference of the arm throughout the motion path. MAGIC MOTION creates an image that matches the natural motion observed by the human eye.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 1

ADDITIONAL RESOURCES

The following resources offer additional information about RED, the DSMC® system, and the RED community:
RED.com: Check the official RED website for the latest information about RED products. RED Learn Articles: RED offers in-depth technical articles about RED cameras, post-production, and digital
cinematography. RED Downloads: Go to RED Downloads to download the latest firmware, operation guides, and post-production
software. DSMC Toolkit: Go to RED Downloads to find the DSMC Toolkit, which offers many helpful tools and resources to
customize and improve your camera workflow.
RED Support: Check the RED SUPPORT site for FAQs, or to file a support ticket. Bomb Squad Support: For more information, contact your Bomb Squad representative. In-Camera Help: Select the Help button on an in-camera screen to open up the help for that screen. REDUSER: Discuss all things RED on the REDUSER third-party forum.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 2
CAMERA SYSTEM
2
NOTE: Modules and lens mounts are NOT HOT SWAPPABLE, meaning you cannot remove or install these items while the camera is turned on. Before installing or removing these items, you MUST turn off the camera. Failure to do so may result in damage to the item or camera that is not covered under warranty.
NOTE: Availability of components listed in this chapter is subject to change at any time.
COMPONENTS

ADDITIONAL RESOURCES

For more information on power and media, see the following guides, available at www.red.com/downloads:
DSMC Power Operation Guide DSMC Media Operation Guide

BRAIN

Figure: WEAPON8K S35
The DSMC BRAIN® is the image processing center of the camera system and supports power, media, and other modules.
The only ports on the BRAIN are the DSMC2™ Top Handle port and EVF/LCD ports. A port expander or power module is required to power the camera. All other input/ouput (I/O) ports are available only via expanders and other modules. This modular approach allows you to customize your camera and make use of the ports that are most applicable to your needs.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 3
The RED® Tactical Hand Controller (T.H.C.) cannot pair directly to the camera. To use the T.H.C. with the camera, the T.H.C. needs to be connected to the W.M.D. (either wired or wirelessly). For more information about the T.H.C., see the RED 3-Axis System Operation Guide at www.red.com/downloads.
BRAIN CONTROL: PWR/REC KEY
Fully press and hold the PWR/REC key for two (2) seconds to turn on/off. When the camera is on, fully press and then release the PWR/REC key to toggle record start/stop.
BRAIN LEDS
This section describes the LED functions for the camera. NOTE: When the camera is powered only by battery and not AC power, the Power Status LED (PWR) on the expander
or module does not turn on. You can press the button on the battery to check the battery charge level.
LED COLOR/FLASHING DESCRIPTION
Power Status LED (PWR) Off Camera off
Green Camera on
1
Amber flashing Camera on; 5 to 10 min of battery time available
Amber Camera booting
Red flashing Camera on; < 5 min of battery time available
Red Camera shutting down
Record Status LED (REC) Off No media present
Green Ready to record
Amber Finalizing
Red flashing (slow) Media mounted with > 5% and ≤ 10% of media
space available
Red flashing (fast) Media mounted with ≤ 5% of media space
available
Red Recording
Power Status LED (PWR) and Record Status LED (REC)
1. To prevent battery drain, the PWR LED does not illuminate when the camera is off and a power source is present.
Both green flashing Firmware update in progress
Both red flashing Firmware update error
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 4
BRAIN CONNECTORS, FOCUS HOOK
Figure: WEAPON8K S35 BRAINPorts and Features
# PORT/ITEM DESCRIPTION
1 Primary
EVF/LCD Port
2 Top Handle
Port
3 Secondary
EVF/LCD Port
4 Focus Hook
Mounting
2
Point
5 Focus Hook
Storage Location
6 Back Focus
Adjustment Screw
1. The DSMC2 LEMO Adaptor A allows you to mount other RED® displays.
2. Install only the focus hook or set screw to this mounting point. Damage to the media bay or other components of the camera system caused by installing other devices is not covered under warranty.
2
Mount a DSMC2 RED Touch LCD
1
Mount the DSMC2 Top Handle or DSMC2 Outrigger Handle. This is the only mounting option for the DSMC2 Top Handle or DSMC2 Outrigger Handle (it cannot be attached backward).
Mount a DSMC2 RED Touch LCD. The secondary LCD/EVF port and an HDMI® port cannot be
1
used at the same time. For more information, go to "LCD/EVF 2 / HDMI Select" on page84.
Mount the focus hook. Comes with a set screw installed to protect the threaded insert when the focus hook is not in use.
Store the focus hook or set screw
Adjust back focus
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 5
MEDIA BAY CONTROLS
Figure: Media Bay Controls
# CONTROL DESCRIPTION
1 User Key 1 Programmable key
User Key 1 + 2 Press: Eject Media
2 REC button Programmable key
Full Press: Record Toggle Half Press: AF Start
3 User Key 2 Programmable key
User Key 1 + 2 Press: Eject Media
For more information, see the DSMC Media Operation Guide, available at www.red.com/downloads.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 6
MEDIA BAY LEDS
Figure: Media Bay LEDS
This section describes the LED functions for the media bay.
# LED COLOR/FLASHING DESCRIPTION
1 Media Status LED (Back of media
bay)
2 Record Status LED
1
Off No media mounted
Green Preview; media mounted with > 10% of media space
available
Amber Record finalizing or playback mode
Amber flashing (slow)
Red flashing (slow) Media mounted with > 5% and ≤ 10% of media space
Red flashing (fast) Media mounted with ≤ 5% of media space available
Red Recording; media mounted with > 10% of media space
Off Not recording, or media not mounted
Red Recording
Formatting media
available
available
1. For more information on how to enable/disable this LED, go to "Indicator" on page116. If media is not mounted, this LED is off.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 7
REDMINI-MAG SYSTEM
Figure: RED MINI-MAG (120GB)
RED MINI-MAG® SSDs deliver fast and reliable recording options for your camera. A RED STATION® enables you to connect media to your computer for offloading and editing. RED offers the following RED MINI-MAG SSDs:
Item Part Number Required Firmware
RED MINI-MAG (120GB) 750-0075 v6.1.35 or later
RED MINI-MAG (240GB) 725-0082 v5.1.47 or later
RED MINI-MAG (512GB) V4
RED MINI-MAG (512GB) V5
RED MINI-MAG (512GB) V6
RED MINI-MAG (1TB)2 725-0081 v5.3.34 or later
1. To see the Model number, go to Menu > Media > Device.
2. The RED MINI-MAG 1TB can take up to 20 seconds to mount to a computer or a camera.
For more information, see the DSMC Media Operation Guide, available at www.red.com/downloads.
1
1
1
725-0078 v5.1.34 or later
725-0078 v6.2.60 or later; or v6.3.17 or later
725-0078 v6.2.63 or later; or v6.3.27 or later
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 8

EXPANDERS

NOTE: Only one (1) expander module can be used at a time.
RED offers the following DSMC2 expanders:
Item Part Number
DSMC2 Base Expander 720-0033
DSMC2 REDVOLT Expander 720-0040
DSMC2 Jetpack Expander 720-0039
DSMC2 Jetpack-SDI Expander 720-0048
DSMC2 V-Lock I/O Expander 720-0045
DSMC2 BASE EXPANDER
Figure: DSMC2 Base Expander
The DSMC2 Base Expander is an ideal connector module for general input/output (I/O) needs. Manufactured from lightweight and durable magnesium, this low-profile module mounts directly to the BRAIN and offers interface connections for power (DC IN), HDMI, 3G-SDI (HD-SDI), CTRL and SYNC ports (for Timecode and Genlock), as well as a 3.5mm microphone input and a 3.5mm line-level headphone out.
The DSMC2 Base Expander also offers rear-mounting support for DSMC2-compatible battery and power modules, such as the DSMC2 REDVOLT® XL Module. The low profile DSMC2 Base Expander offers a variety of connectors and is ideal for run-and-gun and independent shooters.
NOTE: Only one (1) expander module can be used at a time.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 1 9
DSMC2 REDVOLT EXPANDER
Figure: DSMC2 REDVOLT Expander
Designed for advanced configurations, the DSMC2 REDVOLT Expander mounts directly to the camera and offers an expansive array of I/O connectors and functionality available for the camera system. The DSMC2 REDVOLT Expander features ports for power in (DC IN), Genlock (BNC), Timecode (LEMO), GIG-E, and more. HDMI and two 3G-SDI (HD­SDI) outputs offer versatility for your video output needs, while an integrated USB power output is available to support wireless HDMI transmitters.
The DSMC2 REDVOLT Expander offers a removable audio module with two (2) standard XLR connections for most professional audio needs. Each XLR input features a 3-position selector switch to designate the incoming audio signal type: Balanced Line Level, Balanced Mic Level, and Balanced Mic with +48V phantom power. Additionally, a 3.5mm line-level headphone jack lets you sample audio during takes and in playback mode.
The DSMC2 REDVOLT Expander also provides multiple auxiliary power outputs, enabling the use of peripheral camera accessories and more:
A rear-facing 4-Pin 0B LEMO AUX PWR output supports Start/Stop Trigger IN, Tally OUT, and provides power out up to 1.5 Amps.
A front-facing 2-Pin 0B LEMO AUX PWR port provides 3.0A maximum. A front-facing 7-Pin 0B LEMO SERIAL provides 1.5A maximum. The SERIAL port is ideal for connecting to motor
drivers. A rear-facing Timecode port offers 5V at 200 mA for powering external timecode devices. A rear-facing USB port offers 5V at 1.5A for powering HDMI transmitters or small mobile devices. The two (2) 3-Pin XLR audio ports in the audio module each offer +48V phantom power.
For hot-swap support when it matters most, the DSMC2 REDVOLT Expander also supports a single REDVOLT battery. Additional DSMC2-compatible battery and power modules can be mounted for your changing power needs.
The DSMC2 REDVOLT Expander also features a selector switch that enables the camera to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the camera on and off when the camera is mounted in remote or difficult to maneuver locations. This expander is the ideal solution for a variety of production environments, maximizing camera interface and functionality for the most demanding shoots.
NOTE: Only one (1) expander module can be used at a time. NOTE: The DSMC2 REDVOLT Expander requires that your camera must be on firmware v6.2.55 or later.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 0
DSMC2 JETPACK EXPANDER
Figure: DSMC2 Jetpack Expander
The DSMC2 Jetpack Expander is specifically designed for aerial, gimbal, handheld, and other lightweight/remote configurations. This expander features standard connectors for power (DC-IN), CTRL, and SYNC for all of your Timecode and Genlock needs. In addition, the DSMC2 Jetpack Expander offers custom- tailored support and connectors for HDMI and USB power out—perfect for housings and low-profile setups.
The DSMC2 Jetpack Expander also features a selector switch that enables the camera to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the camera on and off when the camera is mounted in remote or difficult to maneuver locations.
NOTE: Only one (1) expander module can be used at a time.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 1
DSMC2 JETPACK-SDI EXPANDER
Figure: DSMC2 Jetpack-SDI Expander
The DSMC2 Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDI Expander provides a low-profile expander solution. The 3G-SDI connection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage.The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.
The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
NOTE: Only one (1) expander module can be used at a time.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 2
DSMC2 V-LOCK I/O EXPANDER
Figure: DSMC2 V-Lock I/O Expander
The DSMC2 V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using RED BRICK batteries.
The DSMC2 V-Lock I/O Expander also features a selector switch that enables the BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
This expander is an ideal solution for a wide variety of production environments—from low-profile run-and-gun situations to studio shoots that require mobility.
NOTE: The DSMC2 Top Handle may not be fully compatible with the DSMC2 V-Lock I/O Expander, as the top handle may interfere with the battery when one is attached to the expander module.
NOTE: Only one (1) expander module can be used at a time.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 3
THIRD-PARTY BATTERY COMPATIBILITY
To be compatible with the DSMC2 V-Lock I/O Expander, third-party batteries must meet these requirements:
Maximum width: approximately 100.6 mm Minimum radius of the side edge of the V-mount (rear mounting surface): approximately 9.70 mm
The following third-party batteries have been fit-tested by RED and are mechanically compatible with the DSMC2 V­Lock I/O Expander (additional batteries may be compatible, but have not been tested):
Blueshape® (All BV series) IDX® (E-HL10DS and E-HL9) Sony® (BP-FL75) Switronix (Hypercore series and XP-L90S)
WARNING: While third-party batteries may be mechanically compatible with the camera system, the manufacturer is responsible for the performance and stability of third-party options, not RED. Damage to the camera system or third­party devices caused by using third-party power options is not covered under warranty. The camera may be unable to determine and display the voltage or remaining battery capacity of third-party power options.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 4

POWER MODULES

RED offers the following DSMC2 power modules:
Item Part Number
DSMC2 REDVOLT XL Module 740-0034
NOTE: If a power module is attached to the DSMC2 REDVOLT Expander, the power out connectors on the module are enabled only if power is connected to the module (via DC IN or a battery).
DSMC2 REDVOLT XL MODULE
Figure: DSMC2 REDVOLT XLModule
The DSMC2 REDVOLT XL Module mounts seamlessly to the back of the camera—and select other I/O expanders—to provide support for long-lasting and rechargeable REDVOLT XL batteries. The DSMC2 REDVOLT XL Module features a smaller, more ergonomic design with one (1) dual-action release button for removing an attached battery.
The DSMC2 REDVOLT XL Module offers a DC IN power port that can be used to power the camera system when the module is attached to the camera. An included protective baseplate enables the DSMC2 REDVOLT XL Module to serve as a portable and stand-alone REDVOLT XL battery charger. Plug in the DSMC AC Power Adaptor to the 6-pin 1B LEMO DC IN connector on the module and connect a REDVOLT XL battery. While the module is mounted to the camera, it will only charge an attached REDVOLT XL battery if the camera is powered off.
Two (2) rear facing auxiliary ports provide power for external camera accessories, while remaining out of the way while shooting.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 5
REDBATTERIES AND CHARGERS
Figure: REDVOLT XL(left) and REDVOLT (right)
RED offers the following batteries and chargers:
Item Part Number
REDVOLT XL 740-0021
REDVOLT Charger (Quad) 740-0015
For more information, see the DSMC Power Operation Guide, available at www.red.com/downloads.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 6

DISPLAYS AND ELECTRONIC VIEWFINDERS

RED offers the following displays and electronic viewfinders (EVFs):
NOTE: RED offers multiple mounting solutions for each camera type.
Item Resolution Tilt
(Approximate)
DSMC2 RED Touch 7.0" LCD (Woven CF)
DSMC2 RED Touch 7.0" LCD (Aluminum)
DSMC2 RED Touch 4.7" LCD
RED Touch 5.0" LCD
RED Touch 7.0" LCD
RED Touch 9.0" LCD
RED PRO LCD 7"
2
2, 3
2
2
1
1
1
1920 x 1136 Total: 180°
Forward: 90° Backward: 90°
1920 x 1136 Total: 180°
Forward: 90° Backward: 90°
1280 x 720 Total: 240°
Forward: 90° Backward: 150°
800 x 400 Total: 270°
Forward: 180° Backward: 90°
1920 x 1136 Total: 180°
Forward: 90° Backward: 90°
1280 x 768 Total: 270°
Forward: 180° Backward: 90°
1024 x 600 No tilt No swivel 730-0009
Swivel (Approximate)
Total: 360° CW: 180° CCW: 180°
Total: 360° CW: 180° CCW: 180°
No swivel 730-0019
Total: 360° CW: 180° CCW: 180°
Total: 360° CW: 180° CCW: 180°
Total: 360° CW: 180° CCW: 180°
Part Number
730-0018
730-0024
730-0008
730-0007
730-0011
RED PRO Touch 7.0" LCD2 1920 × 1136 No tilt No swivel 730-0025
DSMC2 RED EVF (OLED)
BOMB EVF® (LCOS)
BOMB EVF (OLED)
1. Using this display with an EPIC or SCARLET camera requires a DSMC2 LEMO Adaptor B.
2. Using this display with a DSMC2 camera requires a DSMC2 LEMO Adaptor A.
3. The RED Touch 7.0" LCD requires that your camera is on firmware v5.2.38 or later.
For a full list of LCD and EVF user keys and default actions, go to "Default Key Functions" on page254.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 7
2
2
2
1920 x 1080 N/A N/A 730-0021
1280 x 784 N/A N/A 730-0004
1280 x 1024 N/A N/A 730-0010
RED LCDS
Figure: DSMC2 RED Touch 7.0" LCD
RED displays provide important camera parameters on the graphical user interface (GUI) and offer a variety of monitor viewing options. RED touchscreen displays enable you to use gestures to navigate menus and adjust camera parameters. RED displays feature 8-bit RGB, 4:4:4 progressive scan, providing up to 16.7 million colors and up to 70% NTSC color gamut.
LCD PRECAUTIONS
WARNING: DO NOT use a RED display as a handle to lift or carry the camera. Damage to a RED display or other
components of the camera system caused by using the display as a handle are not covered under warranty. WARNING: DO NOT use the threaded holes in the RED Touch LCD base to mount the display to the camera. Damage
to a RED display or other components of the camera system caused by using these threaded holes is not covered under warranty.
IMPORTANT: DO NOT try to turn an LCD past its tilt or swivel range. Damage to a RED display or other camera components caused by excessive force is not covered under warranty. For more information on the tilt and swivel range for each display, go to "Displays and Electronic Viewfinders" on the previous page.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 8
BOMB EVFS
Figure: BOMB EVF (OLED)
The BOMB EVF (LCOS) and BOMB EVF (OLED) deliver specialized viewing solutions for the camera. The BOMB EVF (LCOS) is a high-definition, lightweight, and low-profile viewfinder. The BOMB EVF (OLED) uses OLED technology, providing deeper blacks and more color accurate images.
Item Contrast Ratio Diopter Range
BOMB EVF (LCOS)
BOMB EVF (OLED)
1. Using these displays with a DSMC2 camera requires a DSMC2 LEMO Adaptor A.
WARNING: DO NOT point the BOMB EVF (OLED) eyepiece at direct sunlight. Continued exposure to direct sunlight may damage the EVF. Point the eyepiece away from sunlight when not in use. Damage to the BOMB EVF (OLED) caused by continued exposure to direct sunlight is not covered under warranty.
1
1
1000:1 typical 2.0 to –5.0.1
>10,000:1 typical 2.0 to –5.0.1
BOMB EVF FEATURES
# Feature Description
1 EVF
connector
2 EVF Tally
LED
3 Key 1 Programmable key
4 Key 2 Programmable key
Custom digital video and power interconnection between the camera and RED EVF; Pinout not published
When enabled, the LED illuminates red when recording; For more information, go to "Indicator" on
page116
Magnify: Toggle
Exposure Check: Toggle
5 Eyepiece
heater
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 2 9
The integrated eyepiece heater automatically heats the eyepiece when the EVF detects a low ambient temperature
DSMC2 RED EVF
The DSMC2 RED EVF (OLED) is a high definition electronic viewfinder designed as the ideal single-viewer monitoring solution. Featuring the latest OLED technology, this EVF provides an unmatched personal viewing experience with a 1080p OLED micro-display, and improved color accuracy with 30-bit RGB color represenation. View and monitor your RED footage as it is intended with truer colors and deeper blacks in a larger field of view.
Engineered with OBSOLESCENCE OBSOLETE® in mind, the DSMC2 RED EVF (OLED) is perfect for use with WEAPON, SCARLET-W, RAVEN, EPIC, or SCARLET cameras. RED offers multiple mounting solutions for each camera type.
WARNING: DO NOT point the DSMC2 RED EVF (OLED) eyepiece at direct sunlight. Continued exposure to direct sunlight may damage the EVF. Point the eyepiece away from sunlight when not in use. Damage to the DSMC2 RED EVF (OLED) caused by continued exposure to direct sunlight is not covered under warranty.
C OPY R I GHT © 2 016 R E D.COM, I N C 955 - 0 1 38_V 6.3, R E V - B | 3 0
Loading...
+ 228 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use