Page 1
Label Picture Description QTY (pc)
A Chair Backrest 1
B
Chair Base With
Footrest
1
C
Power Cord with
transformer
1
D Left Wing 1
E Right Wing 1
Assembly Instructions
Caution : You must read this before you proceed
Power Recliner
Parts List
Page 1 of 7
Page 2
Step 1
Step 2
Assembly Steps
Parts Introduction
This product has multiple parts and may require up to some 30 minutes to assemble. To give you an
overview of the product parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Assembly Preparation
Take out the Chair Backrest(A) from the Chair Base with Footrest(B).
Turn the Chair Base with Footrest(B) upside down on a clean, non-marring surface.
Take out the two non-woven bags inside from the bottom of the seat.
Then take out the Left Wings(D) and Right Wings(E) from non-woven bags.
Before Beginning
Assembly:
Front Facing
Chair Backrest(A)
Chair Base with
Footrest(B)
Right Wing(E)
Left Wing(D)
Velcro
A
B
EDA
Page 2 of 7
Page 3
Step 3
Step 4
Step 5
Step 6
Take out the small carton box and open it to take out the Power Cord with transformer (C).
With assistance from your adult partner, hold up the Chair Backrest(A).
while standing behind the Chair.
Insert the small metal arms on the sides of the Chair Backrest(A) into the prefabricated slide lock gadget
on the Chair Base with Footrest(B) as shown above.
Firmly but gently, push the Chair Backrest(A)downwards until the Backrest(A) is fully slotted and locked
into position.
Insert the Right Wing(E) into the right side of Chair Backrest(A) at the slots pressing gently but firmly
downwards until they click into place.
Repeat the same process to insert the Left Wing(D) into the left side of Chair Backrest(A).
C
Insert
B
B
A
B
A
B
E
A
D
BEVelcro
Page 3 of 7
Page 4
Step 7
Step 8
Step 9
Step 10
Go to find the motor connector under the bottom of the seat.
Connect the joint from the motor and the Power Cord(C) , fix the draw-ingear after connected.
Smooth down the fabric flap on the Chair Backrest(A).
Run your hands down both sides of the flap,from top to bottom,allowing the velcro tape to adhere to the
flap under the seat of the Chair.
Make sure all parts are connected and securely locked into position.
Plug into a socket into position on the wall or any other place.
Now your Recliner Chair is ready for use.
Force apart the draw-ingear , then separate the joint from the motor and Power Cord(C).
B
C
A
B
E
D
Velcro
C
AED
Velcro
B
Velcro
Page 4 of 7
Page 5
Step 11
Step 12
Push up the Right wing(E) and Left Wing (D) one by one until taken off from the Chair Backrest (A).
Disassembly Note:open the flap on the Chair Backrest(A),use a screwdriver(Donยดt use fingers) pressing
outward on the metal ear on the preattached Metal Bracket on one side of the Chair Base(B),with
assistance of you adult partner to keep the Chair Base(B) in place,pull out the Chair Backrest(A) upward
at the same time,repeat the same step for another side.Then the Chair Backrest(A) can be taken out.
A
B
B
A
Velcro
E
DAB
Velcro
Page 5 of 7
Page 6
User Instructions.
To get into a open position-To press the front button of switch.
Sit into the seat.
The Chair Backrest will fall down and footrest will open when press the front button of switch,the Chair
Backrest by your back.So do must put your feet on footrest well when you press the front button of switch
on the outside of right armrest until into a fully reclined position.
To get out of chair-move Seatback into Upright Position:To press the hind button of switch.
Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your finger to press the hind button of switch on the outside of right armrest.
The Chair will close smoothly until into a fully upright position.
Push Back Chair
Please read the Instruction Manual below carefully before use.
Supervise children,when in use of this Power Recliner.
Do not allow children to play on the chair.
Always leave the chair in an upright and closed position after use.
Keep hands and feet clear of the footrest mechanism and any gaps.
Just open it or close it with the button of switch
Don't sit any armrest of chair.
press the hind button to Close
press the front button to Open
Switch
Switch
Page 6 of 7
Page 7
Page 7 of 7
Loading...