Page 1
LIGHTED CORNER CURIO
GOLDEN OAK
MAHOGANY
Assembly Instructions
Page 2
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra hardware with your unit.
LIGHTED CORNER CURIO
Parts List
(1) Quantity
Of 6
FLAT HEAD LONG SCREW
(4) Quantity
Of 24
CAM LOCK
(7) Quantity
Of 5
HINGE
(2) Quantity
Of 5
WOOD DOWEL
(5) Quantity
Of 24
COVER
(8) Quantity
Of 2
MAGNET PLATE
(3) Quantity
Of 24
CAM BOLT
(6) Quantity
Of 31
FLAT HEAD SHORT SCREW
(9) Quantity
Of 2
SMALL MACHINE SCREW
(10) Quantity
Of 2
METAL PLATE
(13) Quantity
Of 2
MAGNET
(16) Quantity
Of 1
METAL SHADE
(11) Quantity
Of 2
HANDLE
(14) Quantity
Of 3
LARGE MACHINE SCREW
(17) Quantity
Of 1
LIGHT
(12) Quantity
Of 72
ROUND HEAD SCREW
(15) Quantity
Of 15
SHELF SUPPORT
(18) Quantity
Of 1
TILTING PREVENT HARDWARE
Page 3
UPPER RIGHT BACK RAIL
UPPER LEFT BACK RAIL
TOP PANEL
UPPER RIGHT SIDE PANEL
UPPER LEFT SIDE PANEL
UPPER SHELF
UPPER DOOR
UPPER BACK PANEL
LOWER RIGHT BACK RAIL
LOWER LEFT BACK RAIL
LOWER SHELF
LOWER RIGHT SIDE PANEL
LOWER LEFT SIDE PANEL
BASE
LOWER DOOR
LOWER BACK PANEL
LARGE BACK MIRROR
SMALL BACK MIRROR
GLASS SHELF
LIGHTED CORNER CURIO
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra hardware with your unit.
Parts List
A Quantity
Of 1
D Quantity
Of 1
G Quantity
Of 1
J Quantity
Of 1
B Quantity
Of 1
E Quantity
Of 1
H Quantity
Of 2
K Quantity
Of 1
C Quantity
Of 1
F Quantity
Of 1
I Quantity
Of 1
L Quantity
Of 1
M Quantity
Of 1
P Quantity
Of 2
S Quantity
Of 3
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
N Quantity
Of 1
Q Quantity
Of 2
O Quantity
Of 1
R Quantity
Of 2
For replacement parts or questions, please
Call Customer Service. Do not return
product to store, please call Manufacturer
for assistance, questions or Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Page 4
LIGHTED CORNER CURIO
Assembly Instructions
Figure 1
Figure 2
INSERT WOOD DOWELS (2) INTO
PREDRILLED HOLES ON EDGE OF
UPPER LEFT BACK RAIL (B) AND
FIT INTO CORRESPONDING
HOLES ON UPPER RIGHT BACK
RAIL (A). INSERT FLAT HEAD
LONG SCREWS (1) THROUGH
PREDRILLED HOLES ON UPPER
RIGHT BACK RAIL (A) AND
TIGHTEN INTO CORRESPONDING
HOLES ON UPPER LEFT BACK
RAIL (B). AS SHOWN IN FIGURE 1
INSERT FLAT HEAD SHORT SCREWS (6)
THROUGH METAL SHADE (16) AND
TIGHTEN INTO PREDRILLED HOLES ON
UNDERSIDE OF TOP PANEL (C).
INSERT FLAT HEAD SHORT SCREWS (6)
THROUGH THE HOLDER OF LIGHT (17)
AND TIGHTEN INTO PREDRILLED
HOLES ON UNDERSIDE OF TOP PANEL
(C). LEAD THE POWER CORD ON THE
LIGHT (17) THROUGH THE HOLE ON
TOP PANEL (C) TO UPSIDE OF TOP
PANEL (C). AS SHOWN IN FIGURE 2.
( 1)
( 2)
"Please do not over tighten cambolts.
Please stop when you feel tight"
Figure 3
TIGHTEN CAM-BOLTS (3) INTO
PREDRILLED HOLES ON UPSIDE
OF UPPER SHELF (F) AND FIT
INTO CORRESPONDING HOLES
ON BOTTOM EDGES OF PARTS (A,
B, D, E). INSERT CAM-LOCKS (4)
INTO BIG HOLE ON PARTS (A, B,
D, E) WITH SLOT FOR
SCREWDRIVER FACING
OUTWARD. ROTATE CAM-LOCKS
(4) CLOCKWISE TO SECURE
CAM-BOLTS (3). PUSH COVERS
(5) INTO CAM-LOCKS (4).
ASSEMBLE TOP PANEL (C) IN
SAME MANNER. AS SHOWN IN
FIGURE 3.
Page 5
LIGHTED CORNER CURIO
Assembly Instructions
Figure 4
6
11
6
10
G
7
A
13
12
G
INSERT FLAT HEAD SHORT SCREW (6)
THROUGH MAGNET PLATE (8) AND
TIGHTEN INTO PREDRILLED HOLE ON
UPPER DOOR (G). INSERT FLAT HEAD
SHORT SCREWS (6) THROUGH METAL
PLATE (10) AND TIGHTEN INTO
PREDRILLED HOLES ON UPPER DOOR
(G). INSERT SMALL MACHINE SCREW
(9) THROUGH PREDRILLED HOLES ON
UPPER DOOR (G), METAL PLATE (10)
AND TIGHTEN INTO HANDLE (11).
INSERT FLAT HEAD SHORT SCREWS (6)
THROUGH THE HOLES ON HINGES (7)
AND TIGHTEN INTO PREDRILLED
HOLES ON EDGES OF UPPER RIGHT
SIDE PANEL (D) AND UPPER DOOR (G).
INSERT ROUND HEAD SCREWS (12)
THROUGH END OF MAGNET (13) AND
TIGHTEN INTO PREDRILLED HOLES ON
UNDERSIDE OF TOP PANEL (C). AS
SHOWN IN FIGURE 4.
Figure 5
Figure 6
PLEASE BE CAREFULLY ATTACH
LARGE BACK MIRRORS (Q) INTO
GROOVES OF PARTS (A, B, C, D,
E, F), AND ATTACH UPPER BACK
PANELS (H) INTO SLOTS OF REAR
EDGES OF PARTS (A, B, C, D, E,
F). INSERT ROUND HEADSCREWS
(12) THROUGH PREDRILLED
HOLES ON UPPER BACK PANELS
(H) AND TIGHTEN INTO
CORRESPONDING HOLES ON
REAR EDGES OF PARTS (A, B, C,
D, E, F). AS SHOWN IN FIGURE 5.
I
NSERT WOOD DOWELS(2) INTO
PREDRILLED HOLES ON EDGE OF
LOWER LEFT BACK RAIL(J) AND FIT
INTO CORRESPONDING HOLES IN
LOWER RIGHT BACK RAIL(I).INSERT
FLAT HEAD LONG SCREWS(1)
THROUGH PREDRILLED HOLES ON
LOWER RIGHT BACK RAIL(I) AND
TIGHTEN INTO CORRESPONDING
HOLES ON LOWER LEFT BACK
RAIL(J).AS SHOWN IN FIGURE(6).
Page 6
TIGHTEN INTO CORRESPONDING
LIGHTED CORNER CURIO
Assembly Instructions
Figure 7
Figure 8
TIGHTEN CAM-BOLTS (3) INTO
PREDRILLED HOLES ON UPSIDE
OF BASE (N) AND FIT INTO
CORRESPONDING HOLES ON
BOTTOM EDGES OF PARTS
(I,J,L,M). INSERT CAM-LOCKS(4)
INTO BIG HOLE ON
PARTS(I,J,L,M) WITH SLOT FOR
SCREWDRIVER FACING
OUTWARD.ROTATE CAM-LOCKS
(4) CLOCKWISE TO SECURE
CAM-BOLTS(3).PUSH COVERS (5)
INTO CAM-LOCKS(4).ASSEMBLE
LOWER SHELF(K) IN SAME
MANNER.AS SHOWN IN FIGURE
7.
INSERT FLAT HEAD SHORT SCREW (6)
THROUGH MAGNET PLATE (8) AND TIGHTEN
INTO PREDRILLED HOLE ON LOWER DOOR (O).
INSERT FLAT HEAD SHORT SCREWS(6)
THROUGH METAL PLATE(10) AND TIGHTEN
INTO PREDRILLED HOLES ON LOWER
DOOR(O) .INSERT SMALL MACHINE SCREW(9)
THROUGH PREDRILLED HOLES ON LOWER
DOOR(O),METAL PLATE (10) AND TIGHTEN
INTO HANDLE(11).
INSERT FLAT HEAD SHORT SCREWS(6)
THROUGH THE HOLES ON HINGES(7) AND
FIGHTEN INTO PREDRILLED HOLES ON EDGES
OF LOWER RIGHT SIDE PANEL(L) AND LOWER
DOOR(O).INSERT ROUND HEAD SCREWS(12)
THROUGH END OF MAGNET(13) AND TIGHTEN
INTO PREDRILLED HOLES ON UNDERSIDE OF
LOWER SHELF(K)。AS SHOWN IN FIGURE8.
Figure 9
PLEASE BE CAREFULLY ATTACH
SMALL BACK MIRROR(R) INTO
GROOVES OF
PARTS(I,J,K,L,M,N),AND ATTACH
LOWER BACK PANELS(P) INTO
SLOTS OF REAR EDGES OF
PARTS(I,J,K,L,M,N).INSERT
ROUND HEADSCREWS(12)
THROUGH PREDRILLED HOLES
ON LOWER BACK PANELS(P) AND
HOLES ON REAR EDGES OF
PARTS(I,J,K,L,M,N).AS SHOWN
IN FIGURE 9.
Page 7
LIGHTED CORNER CURIO
Assembly Instructions
Figure 10
Figure 11
WITH AN ASSISTANT, PLACE
UPPER CABINET ONTO LOWER
CABINET, AND TIGHTEN LARGE
MACHINE SCREWS (14)
THROUGH PREDRILLED HOLES
ON LOWER SHELF (K) INTO
THREADED HOLES ON
UNDERSIDE OF UPPER SHELF (F).
AS SHOWN IN FIGURE 10.
FIT SHELF SUPPORTS (15) INTO
PREDRILLED HOLES ON INSIDE
OF PARTS (A, B, D, E, I, J, L, M),
AND PUT GLASS SHELVES (S) ON
EACH SHELF SUPPORTS (15). AS
SHOWN IN FIGURE 11.
Figure 12
FIT THE PLUG TO THE
APPROPRIATE POWER SOURCE
AND THE LIGHT IS READY TO BE
LIT. TURN THE LIGHT ON AND
OFF BY TURNING THE SWITCH
ON THE SIDE OF LIGHT FIXTURE.
AS SHOWN IN FIGURE 12.
Page 8
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact the retailer that you purchased from for returns.
Page 9
WARNING:
USE THE PROPER BULB AND THE PROPER POWER SUPPLY LABELED ON THE LAMP HOLDER.
THIS PRODUCT CAN ONLY BE USED INDOORS.
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING
THE FOLLOWING.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
DO NOT USE SEASONAL PRODUCTS OUTDOORS UNLESS MARKED SUITABLE FOR INDOOR AND
OUTDOOR USE. WHEN PRODUCTS ARE USED IN OUTDOOR APPLICATIONS, CONNECT THE PRODUCT
TO A GROUND FAULT CIRCUIT INTERRUPTING (GFCI) OUTLET. IF ONE IS NOT PROVIDED, CONTACT A
QUALIFIED ELECTRICIAN FOR PROPER INSTALLATION.
THIS SEASONAL USE PRODUCT IS NOT INTENDED FOR PERMANENT INSTALLATION OR USE.
DO NOT MOUNT OR PLACE NEAR GAS OR ELECTRIC HEATERS, FIREPLACE, CANDLES OR OTHER
SIMILAR SOURCES OF HEAT.
DO NOT OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE BEING USED OR WHERE OXYGEN IS
BEING ADMINISTERED.
DO NOT LET LAMPS REST ON THE SUPPLY CORE OR ON ANY WIRE.
UNPLUG THE PRODUCT WHEN LEAVING THE HOUSE, WHEN RETIRING FOR THE NIGHT, OR IT LEFT
UNATTENDED.
CLOSE SUPERVISION IS NECESSARY WHEN THIS APPLIANCE IS USED BY, OR NEAR
CHILDREN, INVALIDS, OR DISABLED PERSONS.
USE THIS APPLIANCE ONLY FOR ITS INTENDED USE AS DESCRIBED IN THIS MANUAL.
DO NOT USE ATTACHMENTS NOT RECOMMENDED BY THE MANUFACTURER.
DO NOT HANG ORNAMENTS OR OTHER OBJECTS FORM CORD, WIRE, OR LIGHT STRING.
NEVER OPERATE THE APPLIANCE IF IT HAS A DAMAGED CORD OR PLUG, IF IT IS NOT
WORKING PROPERLY, IF IT HAS BEEN DROPPED OR DAMAGED. RETURN THE FURNISHING TO A
SERVICE CENTER FOR REPAIR.
TO DISCONNECT, TURN ALL CONTROLS TO THE OFF POSITION, THEN REMOVE PLUG FROM OUTLET.
READ AND FOLLOW ALL INSTRUCTIONS THAT ARE ON THE PRODUCT OR PROVIDED WITH THE
PRODUCT.
USE AND CARE INSTRUCTIONS
BEFORE USING OR REUSING, INSPECT PRODUCT CAREFULLY. DISCARD ANY PRODUCTS THAT HAVE
CUT, DAMAGED, OR FRAYED WIRE INSULATION OR CORDS, CRACKS IN THE LAMP HOLDERS OR
ENCLOSURES, LOOSE CONNECTIONS, OR EXPOSED COPPER WIRE.
WHEN STORING THE PRODUCT, CAREFULLY REMOVE THE PRODUCT FROM WHEREVER IT IS PLACED,
INCLUDING TREES, BRANCHES, OR BUSHES, TO AVOID ANY UNDUE STRAIN OR STRESS ON THE
PRODUCT CONDUCTORS, CONNECTIONS AND WIRES.
WHEN NOT IN USE, STORE NEATLY IN A COOL, DRY LOCATION PROTECTED FROM SUNLIGHT.
SAVE THESE INSTRUCTIONS
Loading...