
Label Picture Description QTY (pc)
Caution : You must read this before you proceed

Label Picture Description QTY (pc)
Before
Beginning
Assembly:

Take out the Chair Backrest(A) from Chair Base with Footrest(B).
This product has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the product parts, the above picture is
to help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
Chair Backrest(A)
Chair Base(B)
front Legs(C)
Front
Facing

Place the Chair Base with Footrest(B) facedown on a clean,non-marring surface.
Open the non-woven bag and take out the Front legs©,Hind Leg(D)and Gasket
().
Install the Front Leg(C) and Hind Leg(D) at the bottom of the Chair by
placing one Gasket() on the threaded stem.
Then insert threaded stem into the mounting postion at the corner of the
Chair.
Tighten by turning the Leg clockwise,Do not over tighten.
Repeat the same process to install the remaining two Legs.
Take care of the shape of the Legs and ensure they in the correct postions.
Note: The use of Gaskets are OPTIONALand are especially useful to help
alleviate slight wobbleness. Some Legs may need more than one gasket
whilst some Legs may not need any.

With assistance from your adult partner, hold up the Chair Backrest(A).
while standing behind the Chair.
Insert the small metal arms on the sides of the Chair Backrest(A)into the
prefabricated slide lock gadget on the Chair Base with Footrest(B)as shown
above.
Firmly but gently, push the Chair Backrest(A)downwards until the Backrest is
fully slotted and locked into position.
Smooth down the fabric flap on the Chair Backrest(A).
Run your hands down both sides of the flap,from top to bottom,allowing the
velcro tape to adhere to the flap under the seat of the Chair.

Supervise children,when in use of this Push Back Chair.
Disassembly Note:open the flap on the Chair Backrest(A),use a
screwdriver(Don´t use fingers) pressing outward on the metal ear on the
preattached Metal Bracket on one side of the Chair Base(B),with assistance
of you adult partner to keep the Chair Base(B) in place,pull out the Chair
Backrest(A) upward at the same time,repeat the same step for another
side.Then the Chair Backrest(A) can be taken out.
Please read the Instruction Manual below carefully before use.
Make sure all parts are connected and securely locked into position.
Position Chair right side up and test for stability.
Your Chair is ready for use.
Caution: This Chair can only be used on a flat, level surface.

to get out of chair-move Seatback into Upright Position
Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your feet to push the footrest down.
The Chair will automatically lock when it is in the fully upright position.
Where necessary,use your arms help lift/push yourself out of the seat
Do not let children stand in front of or behind the Push Back Chair when
opening or closing the footrest.Do not put you hands inside the Footrest
when opening or closing the footrest. Do not sit any side armrest of Chair.
To get into a open position-To push the Chair Backrest
Sit into the seat.
The Chair Backrest will fall down and footrest will open when push the Chair
Backrest by your back.So do must put your feet on footrest well when you
push down the Chair Backrest.Open the trigger on the outside of right
armrest.
Use your body weight and push backwards into the seat into a fully reclined
position.