Red Barrel Studio W005932333 Assembly Instructions

Caution : You must read this before you proceed

Recliner Chair

Page 1 OF 10

Label Picture Description QTY

A Chair Backrest 1

B1 Right Wing 1

B2 Left Wing 1

C Chair Base 1

D Front Leg 2

E1 Right Hind Leg 1

E2 Left Hind Leg 1

Page 2 OF 10

Label Picture Description QTY

①

②

③

Plastic Washer 3

Washer (M8) 7

Washer (M6) 3

④ Washer Ring 7

⑤

⑥

⑦

⑧

Bolt (M8*25mm) 7

Bolt (M6*40mm) 3

Allen Key(M6) 1

Allen Key(M8) 1

Page 3 OF 10

Before
Beginning
Assembly:

OVERVIEW

x7

Chair Backrest (A)

x3

M6*40x
3

M8x7

M6x1

M6x3

M8x1

M8*25x
7

Right Wing(B1)

Left Wing(B2)

Chair Base(C)

Left Hind Leg(E2)

Front Leg (D)

FRONTFACING

This Recliner Chair has multiple parts and may require up to some 30 minutes
to assemble.To give you an overview of the Recliner Chair parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions herebelow to familiarise the parts and steps before
assembly.

Page 4 OF 10

Step 1

x3

M6x3

x7

M8x7

M8x
7

Inner Box
withLegs

and

Hardware

M6

Chair Base(C)

Inner Box

M6x
3

M8

x2

Place the Chair Base(C) on a clean,non-marring surface.
Take out the four wooden legs and Hardware from inner box,as picture shown
on above.

Step 2

Inner Box

Footres

t

Left Wing(B2)

Chair Base(C)

Right Wing(B1)

Turn the Chair Base(C) upside down on a clean,non-marring surface.
Extend the Footrest to open.
Carefully take out inner box stowed as shown above.
Open it, and you will find Right Wings (B1) & Left Wing (B2).
Stow the Footrest to original position.

Step 3

①

①

D

Chair Base(C)

Front Leg (D)

Page 5 OF 10

Position the Chair Base(C) on its back，as shown on .
Attach the Front Leg (D) to Chair Base(C) with Plastic Washer(①) by turning

the legs clockwise as shown.
Repeat the same step to install the remaining Front Leg(D).

Note: The use of Plastic Washer(①) are OPTIONAL and are especially
useful to help alleviate slight wobbleness. Some Legs may need more

than one Plastic Washer(①) whilst some Legs may not need any.

Step 4

Right Hind Leg(E1)

Left Hind Leg(E2)

E1

⑧

⑤

④
②

Front Leg (D)

Chair Base(C)

Attach the Right Hind Leg(E1) and Left Hind Leg(E2)to Chair Base(C) with
Bolt(⑤) ,Washer Ring (④),Washer(②) with Allen Key(⑧)by turning the legs

clockwise as shown.

Step 5

Chair Backrest (A)

Left Wing(B2)

Right Wing(B1)

Page 6 OF 10

Position the Chair Backrest(A) on it's right side.
Align the mounting positions of the Left Wing(B2) with left side of Chair
Backrest (A).
Then slide Left Wing(B2) forward by hand to make sure it locks into the
position as shown in the picture.

Repeat the same step to install the Right Wing(B1)．

Step 6

Left Wing(B2)

Right Wing(B1)

⑦

⑥

Chair Backrest (A)

Attach Left Wing(B2) to the Chair Backrest(A) using Bolts(⑥) and Washer(③)
with Allen Key(⑦). As picture shown .
Repeat the same step to install the Right Wing(B1)．

Fully tighten it until secure.

③

Step 7

Right Wing(B1)

Front Leg (D)

Chair Backrest (A)

Chair Base(C)

Hind Leg(E)

With assistance from your adult partner,hold up the fully assembled
Chair Backrest (A) with Right Wings(B1) and Left Wing(B2),stand behind the
chair. Insert the small metal arms on the sides of the Chair Backrest(A) into
the prefabricated slide lock gadget on the Chair Base(C) as shown above.
Firmly but gently,push the Chair Backrest (A)downwards until the Chair

Backrest(A ) is fully slotted and locked into position.

Page 7 OF 10

Step 8

Smooth down the fabric flap on the Chair Backrest.

Step 9

Make sure all parts are connected and securely locked into position.
Your Chair is ready for use.

Step 10

Hind Leg(E)

Chair Backrest (A)

Left Wing(B2)

Chair Base(C)

Right Wing(B1)

Disassembly Note:Open the flap on the Chair Backrest(A),use a
screwdriver(Don't use fingers) pressing outward on the metal ear on the
preattached Metal Bracket on one side of the Chair Base(C),with assistance
of you adult partner to keep the Chair Base(C) in place, pull out the Chair
Backrest(A) upward at the same time,repeat the same step for another
side.Then the Chair Backrest(A) can be taken out.

Page 8 OF 10

User Instructions.

Recliner Chair

Please read the Instruction Manual below carefully before use.
This is a Recliner Chair. At anytime in a reclined seat position or in the upright

position. You may enjoy the rocking motion by using your body weight in a
back-front rocking motion.

Supervise children, when in use of this Recliner.

Do not let children stand in front of or behind the Push Back Chair when
opening or closing the footrest.Do not put your hands inside the Footrest when
opening or closing the footrest.Do not sit any armrest of this Push Back Chair.

To get into a reclined posture - To Recline backrest

Sit into the seat.
Place your feet apart .
Place your left and right arm onto the armrest.
Synchronise a backward push with your arms.
Use your body weight and push backwards into the seat into a fully reclined
position.

To get out of chair - move Seatback into Upright Position

Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Where necessary, use either your arms help lift- push yourself out of the seat.

Page 9 OF 10

Page 10 OF 10