Page 1
CHAIR SIDE TABLE CHARGING STATION
ASSEMBLY INSTRUCTIONS
Before assembling your side table, please read through these
instructions carefully and familiarize yourself with the different parts.
READY
TO
ASSEMBLE
Adult assemblyAdult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Flat washer - 4 pcs Wooden dowel 3/8 X 1 1/4” - 4 pcs
A E
Allen wrench - 1 pc
C
JCB M8 - 4 pcs Wood screw - 8 pcs
B
Spare - 1 pc
Wooden dowel 1/4” X 1 1/4” - 4 pcs
D
Spare - 1 pc
PARTS LIST
01
TOP PANEL 1 PC
02
LEG
03
SIDE PANEL
04
LOWER SHELF
4 PCS
2 PCS
1 PC
01
04
03
Spare - 1 pc
F
Spare - 2 pcs
02
03
Page 1 of 3
Page 2
CHAIR SIDE TABLE CHARGING STATION
Step 1
02
Attach the legs (02) to the top panel (01) using flat washers (A) and JCB (B), tighten
with Allen wrench (C), as shown below.
02
A
02
B
02
02
01
A
B
A
B
Adult assemblyAdult assembly
Install wooden dowels (D) and (E) into the
locator holes on (03) and (04) as shown below.
03
D
03
D
E
D
D
E
04
E
E
note: panel in center
F
STEP 3STEP 2
Attach first side panel (03) to side table
aligning the dowels with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (F).
F
03
F
Adult assemblyAdult assembly
Page 2 of 3
Page 3
CHAIR SIDE TABLE CHARGING STATION
Step 4
Attach second side panel (03) the same as the first but place the lower shelf (04)
in position by aligning the wooden dowels with the holes in the side panel.
04
03
Adult assemblyAdult assembly
Step 5
Apply presure to eliminate any gap between the lower shelf and the side panel
and fix in place using wood screw (F).
F
F
F
Adult assemblyAdult assembly
Congratulations!
Your side table is now ready for use.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Page 3 of 3
Loading...