Red Barrel Studio W005405790 Owner Manual

Copper Rail Fire Pit

WARNING

FOR YOUR SAFETY

1. Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.

2. Read the installation, operation, and
maintenance instructions thoroughly
before installing or servicing this
equipment.

3. Failure to follow these instructions

could result in re or explosion, which

could cause property damage, personal
injury, or death.

WARNING

For Outdoor Use Only

Questions, problems, missing parts?

WARNING

This product can expose you to chemicals
including carbon monoxide which is known to the
State of California to cause birth defects or other

reproductive harm.

ATTACH YOUR
RECEIPT HERE

Keep a copy of your proof of

purchase or order conrmation

which will be needed if you
need to contact us about
warranty coverage.

Purchase Date:

Before returning to your retailer, our exceptional customer service is available.

TABLE OF CONTENTS

Table of Contents Page 2

Before You Begin

Page 2

Package Contents Page 3

Safety Information Page 4

Assembly Page 5

Care and Maintenance Page 7

Warranty Information Page 8

BEFORE YOU BEGIN

Please read and understand this entire manual before attempting to assemble, operate or install this

appliance. If you have any questions regarding the product, please call us toll-free, email us or go

online and live chat.

This manual contains important information about the assembly, care and maintenance of this fire

pit. General safety information is presented in the first few pages and is also located throughout

this manual. Keep this manual for future reference and to educate new users of this appliance.

2

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A
B

D

C

G

E

F

A
B

C
D
E
F

G

Screen Handle 1

Fire Screen 1

Fire Bowl 1

Copper Rail Segment 4

Screen Support Bracket 4

Leg 4

Fire Tool 1

HARDWARE CONTENTS

H

M6 Nut

Qty: 5

I

M6x12 bolt

Qty: 12

J

M6x40 Bolt

Qty: 8

3

SAFETY INFORMATION

WARNING

FOR YOUR SAFETY

1. This appliance is for outdoor use only, and
shall NOT be used in a building, garage or
any other enclosed area.

2. Do NOT use this re pit for indoor heating.

TOXIC carbon monoxide fumes can
accumulate and cause asphyxiation.

3. This re pit is NOT for commercial use.

4. This re pit is NOT to be operated by

children.

5. This re pit is NOT to be used in or on boats

or recreational vehicles.

6. Always use in accordance with all
applicable local, state and national codes.

Contact your local re department for

details on outdoor burning.

7. When using this re pit, exercise the same
precautions you would with any open re.

8. The use of alcohol, prescription or
non-prescription drugs may impair the
consumer’s ability to properly assemble or

safely operate this re pit.

9. Do NOT use this re pit without reading the

entire “Owner’s Manual”.

10. This re pit is for use with dry, seasonal

hardwood. It will burn hotter, more
completely and create less smoke.

11. Do NOT burn charcoal briquets, lump

charcoal, manufactured logs, driftwood,
trash, leaves, paper, cardboard, plywood,
painted or stained or pressure treated
wood. Avoid using softwoods such as pine
or cedar that can throw sparks.

12. Do NOT alter this re pit in any manner.

13. Do NOT use this re pit until it is

COMPLETELY assembled and all parts are
securely fastened and tightened.

14. Do NOT store or use gasoline or other

ammable vapors or liquids in the vicinity

of this or any other appliance.

15. Do NOT store or use an LP gas cylinder

within 10 feet (3.05m) of this re pit while

it is in operation.

16. Do NOT use this re pit near automobiles,

trucks, vans or recreational vehicles.

17. Do NOT use in an explosive atmosphere.
Keep outdoor area clean and free from
combustible materials, gasoline and other

ammable liquids.

18. Do NOT use this re pit under any

overhead or near any unprotected
combustible constructions. Avoid using
near or under overhanging trees and
shrubs.

19. Always use this re pit on a hard,

level non-combustible surface such
as concrete, rock or stone. An asphalt
or blacktop surface may not be acceptable
for this purpose. Do NOT use on wooden
decks.

20. Always empty this re pit before each use.

21. Do NOT wear ammable or loose clothing
when operating this re pit.

22. Do NOT use in windy conditions.

23. Do NOT use this re pit unless re screen

is securely in place.

24. Do NOT use gasoline, kerosene, diesel

fuel, lighter uid or alcohol to light or
relight res.

25. Keep all electrical cords away from a hot

re pit.

26. All surfaces of this re pit are hot when in

operation. To avoid burns, do NOT touch

re pit until it has completely cooled

unless you are wearing protective gear
(Potholders, gloves, BBQ mittens, hot pads
& etc.). Never touch ashes or coals to see if
they are hot.

27. Do NOT leave a lit re pit unattended,

especially around children and pets.

28. Do NOT attempt to move or store this re

pit until all ashes and coals are completely
extinguished.

29. Do NOT remove ashes or coals until they
are completely and fully extinguished.

30. Use heat-resistant gloves or hot pads
when contacting handles.

31. Use long, sturdy re pit tools when adding

or moving logs.

32. Do NOT overload the re pit. Do not add
additional rewood until the re burns

down. NOTICE: If any portion of the bowl

lid or spark guards of this re pit are

glowing red it is overloaded.

33. Do NOT lean over this re pit when

lighting or when in use.

34. Do NOT place a hot re screen or hot re

pit tools onto combustible surfaces such as
grass, wooden deck or furniture.

35. Avoid breathing smoke from the re and

avoid getting it into your eyes.

36. This re pit should be thoroughly

inspected and cleaned on a regular basis.

37. After a period of storage and/or non-use,
check for signs of damage and creosote
build-up. Do NOT operate until necessary
repairs and/or cleanup are executed.

38. Deaths, serious injury or damage to
property may occur if the above is not
followed exactly.

CAUTION: It is not recommended to use this re pit (re place) on a wooden or other combustible surface or any surface that is not entirely

resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely

resistant to high heat, you must use a non-ammable and heat resistant material such as concrete pavers, brick or stone between the re pit
(re place) and the surface

4

ASSEMASSEMBLbl YY

PREPARATION

Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service or email.

Place all parts on a soft, level surface for assembly. You will need a screwdriver for assembly.
Estimated Assembly Time: 30 Minutes | DO NOT over tighten hardware!

Attach Fire Screen Handle A to Fire Screen B

1

using Nut H. Securely tighten.

Hardware Used: H Nut (M6) x 1

Attach the Grate Brackets E to the inside of the Fire

2

Bowl C: insert a Bolt I into one of the small holes

near the rim of the bowl. Slide the eyelet of a Grate

Bracket onto the Bolt and secure with a Nut H. Repeat
to install remaining 3 Grate Brackets.

Hardware Used: I Bolt (M6x12) x 4

H Nut (M6) x 4

Attach each Leg F to the outside of the Fire Bowl C by

3

inserting 2 Bolts I through the eyelets near the bottom of
the Fire Bowl into the threaded holes of the Leg. Repeat to
install remaining 3 Legs.

Hardware Used: I Bolt (M6x12) x 8

2

3

5

ASSEMASSEMBLbl YY

Insert the end of 1 Copper Rail Segment D into the

the top of 1 Leg F. Insert the opposite end of the Copper Rail

4

Segment into the ring of the adjacent Leg. Secure by inserting a

J into each ring's eyelets (closest to the segment you are

Bolt

installing), and through the Copper Rail Segment.

but do not fully tighten, leaving room for adjustment. Repeat to
install remaining 3 Copper Rail Segments. When all 4 Copper Rail

Segments are installed, check for alignment, then fully tighten all
hardware.

Hardware Used: J Bolt

Place

the Fire Screen B on top of the fire pit. Make sure to

use the Fire Tool G to add or move logs or for removing/

5

replacing the Fire Screen B.

Your Fire Pit is ready to enjoy!

(M6x40) x 8

ring at

Gently tighten

4

5

6

CARE & MAINTENANCE

INSPECTING:

This outdoor re pit should be inspected on a regular basis to ensure product

safety and longer product life.

Do NOT attempt to inspect this outdoor re pit until the re is COMPLETELY out

and re pit is COOLED COMPLETELY.

1. Check handle on Spark Guard/Fire Screen to make sure it is secure.

2. Check all parts for signs of damage or rust.

3. If you nd any damaged parts, do NOT operate until repairs and/or

replacement has been done.

CLEANING:

This outdoor re pit should be cleaned on a regular basis to promote a

safer experience and longer product life. NOTE: After repeated use, a slight

discoloration of the nish may occur.

Do NOT attempt to clean this outdoor re pit until the re is COMPLETELY out

and the re pit has cooled completely.

Do NOT use oven cleaner or abrasive cleaners as they will damage this product.

Our products are made to resist

premature rusting. However,

eventually, all metals will rust.

Some environments promote

premature rusting of metals. For

best results, at the

or other corrosion, use an emery

cloth, metal-grade sand paper or a

rotary tool to buff away the blemish

and touch up the spot with rust-

resistant spray paint available at

local hardware stores.

rst sign of rust

Do NOT clean any part of this outdoor re pit in a self cleaning oven as it may

damage the nish.

1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.

2. For stubborn surfaces, use a citrus based degreaser and a nylon scrubbing

brush.

3. Rinse with clean water.

4. Remove built-up creosote from components with a chimney cleaning

product.

STORAGE:

Do NOT move or store this outdoor re pit until the re is COMPLETELY out and

the re pit has cooled COMPLETELY.

1. Once the re is out, coals are cold and outdoor re pit is cool to the touch,

remove ashes and dispose of properly.

2. It is best to cover the outdoor re pit with a protective vinyl cover.

3. Store assembled in a location away from children and pets.

NOTE: If you do not use a protective cover for your re pit, then store this

outdoor re pit in a dry location to maximize product life.

7

Important Notice

Do NOT return to place of purchase—for customer service and

LIMITED WARRANTY

Customers in the Contiguous US

This product is warranted for a period of 1 year from original purchase date
against defects in materials and workmanship under normal use. This
warranty does NOT cover normal wear/weathering, exposure to water,
freezing temperatures, oils, fluids, or chemicals, OR use in a commercial

application if model is not designated as a commercial model. At our sole

discretion, products under warranty will be repaired and/or replaced at no
charge to the customer. Returns sent back to us must be sent via prepaid freight

in the original retail packaging.

issues contact our Customer Service Center or go online and live chat.

All assembly instruction presentations are the property of us and are protected by U.S. copyrights and trademarks. All rights reserved.

warranty