Page 1
ASSEMBLY INSTRUCTIONS
TIMER
BACK
LEG
LUMBAR
THIGH
1
1
2
3
HEAT
INTENSITY
2
4
3
INTENSITY
5
MODE
TIMER
MODE
5
4
9
8
7
6
POWER
AUTO
For fastest service on claims, requests for replacement
parts, or questions, please visit our website at
www.comfortproducts.net/support
e-mail: customerservice@comfortproducts.net
Keep your sales receipt as documentation of your ownership.
Page 2
ITEMS ARE NOT SHOWN TO SCALE.
PART DESCRIPTION QTY.
1 Back
Seat
2
3 Right Shoulder
Left Shoulder
4
5 Power Adapter
1
1
1
1
1
TIMER
BACK
LEG
LUMBAR
THIGH
1
5
1
2
4
3
9
INTENSITY
2
8
3
7
4
6
5
MODE
HEAT
POWER
TIMER
INTENSITY
6
Controller
AUTO
MODE
7 Splitter 1
2
1
Page 3
STEP 1
Attach the Back (1) to the Seat (2) by interlocking the metal pieces at the back of the cushions as shown.
( 1 )
( 2 )
STEP 2
Attach the Right (3) and Left (4) Shoulder to the Back by sliding them onto the brackets on each side of the Back, as shown.
( 4) -L
On the left side of the seat
( 3) -R
there is a USB port for charging
devices.
SB
U
3
Page 4
FUNCTION INSTRUCTIONS
TO ENABLE MASSAGE FUNCTION
Splitter. Connect the Splitter to the two remaining BLACK plugs. Connect the RED plugs together and then the
WHITE plugs together. Plug into a power source.
TIMER
BACK
LEG
LUMBAR
THIGH
1
HEAT
INTENSITY
5
2
4
3
9
INTENSITY
8
3
7
4
6
5
MODE
POWER
TIMER
AUTO
MODE
1
2
(6)
(5)
Black Power
Adapter Plug
TO USE MASSAGE CONTROL
This massage chair is designed with 8 vibration motors and
soothing heat function at the lumbar area.
To engage the massage press the POWER button. Change the
mode, zone, intensity, and heat as desired.
You can also switch to the auto setting by pressing the AUTO
button. This will cycle through the modes at one minute each.
For the manual setting, press any one of the zone buttons. You
may now manually select which zones to engage up to all 4 at
once. (NOTE: pressing the MODE button takes you back out of the
manual setting)
Black Controller Plug
Red Plugs
White Plugs
Splitter
SAFETY AND MAINTENANCE
(7)
Do not use the massage motors for more than 60 minutes
at a time. Always unplug the power adapter when massage
is not in use.
If you have any health concerns about using the massage
feature, consult your physician.
Do not use the massage motors when wet.
To clean the upholstery, unplug the adapter, and spot clean
with leather or vinyl cleaner.
Use the chair to seat only one person at a time.
If the massage does not work, make sure all connections
This screen
shows the time
remaining.
Press HEAT to
activate heat
in lumbar area
Set TIMER at
10, 20, or 30
minutes.
9
Four massage
ZONES
Five levels
of INTENSITY
Nine massage
MODES
Turn POWER on
before adjusting
settings
USB SPECIFICATIONS
Input: 12V-1A
Output: 5A-2A
OTHER INFORMATION
It is normal for the massage motors to be somewhat loud,
especially on high intensity.
The heater produces only a mild heat. It is not designed to get
TIMER
THIGH
MODE
TIMER
BACK
LUMBAR
5
4
3
5
6
POWER
8
7
LEG
1
1
2
3
HEAT
INTENSITY
4
2
very hot.
INTENSITY
AUTO
MODE
4
Page 5
5
Page 6
SAFETY AND MAINTENANCE
• DO NOT stand on the chair. DO NOT use the chair as a stepladder.
• Use this product for seating one person at a time.
• Avoid contact with sharp objects to prevent puncturing the fabric.
• To clean, spot clean only using a damp towel and mild cleaner. First test on a small, obscure area of fabric.
• Chair weight limit not to exceed 300 lbs.
LIMITED WARRANTY
6
Loading...