Page 1
3 PCS SADDLE SET
PAGE 1 OF 6
ASSEMBLY INSTRUCTIONS
Page 2
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS :
1. Remove hardware from plastic bag and sort by size.
2. Please check to see that all hardware and part are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION:
A
B
C
D
E
F
G
H
LEFT CHAIR LEG
(MARK WITH '1')
RIGHT CHAIR LEG
(MARK WITH '2')
CUSHION SEAT WITH FRAME
LONG STRETCHER
SHORT STRETCHER
TABLE TOP
LEG FRAME
TRESTLE BAR
HARDWARE IDENTIFICATION:
4PCS
4PCS
2PCS
4PCS
4PCS
1PC
2PCS
1PC
1
2
3
4
5
6
7
8
9
ALLEN WRENCH
LONG BOLT
BARREL NUT
LOCK WASHER
FLAT WASHER
WOOD PLUG
PAN HEAD SCREW
DOWEL
SHORT BOLT
1PC
6PCS
6PCS
8PCS
8PCS
6PCS
16PCS
12PCS
8PCS
Page 3
PAGE 3 OF 6
ASSEMBLY INSTRUCTIONS
STEP 1
Place cushion seat upside down on soft surface. Hand tighten
left leg to the seat frame using short bolt, lock washer and flat
washer.
A
1
5
LOOSELY TIGHTEN
MARKED WITH '2'
9
4
MARKED WITH '1'
STEP 2
Hand tighten right leg to the seat frame using short bolt,
lock washer and flat washer. Insert short stretcher into the
two legs.
B
5
4
E
9
1
LOOSELY TIGHTEN
C
MARKED WITH '2'MARKED WITH '1'
STEP 3 STEP 4
Hand tighten another left leg to the seat frame using short
bolt, lock washer and flat washer. Insert long stretcher into
the two left legs.
1
9
LOOSELY
TIGHTEN
5
4
A
D
Hand tighten another right leg to the seat frame using short
bolt, lock washer and flat washer. Insert long stretcher and
short stretcher into the legs.
C
MARKED WITH '2'
E
D
B
MARKED WITH '1'
MARKED WITH '2'
Page 4
ASSEMBLY INSTRUCTIONS
PAGE 4 OF 6
STEP 5
Tighten all short bolts (from step 1 to 4) with Allen wrench.
STEP 6
Insert screw into the bottom of stretchers and tighten with screw driver (Not provided).
5
4
9
1
STEP 7
Complete.
7
Page 5
ASSEMBLY INSTRUCTIONS
PAGE 5 OF 6
STEP 8
Place table top upside down on soft surface, then insert dowels into table aprons. Align and fasten left leg frame to table top
using long bolt and barrel nut and tighten with Allen wrench.
8
8
3
2
G
1
F
STEP 9
Insert dowels into trestle bar. Align and fasten trestle bar to leg frame using long bolt and barrel nut and tighten with Allen
wrench.
G
8
8
3
H
2
1
Page 6
PAGE 6 OF 6
ASSEMBLY INSTRUCTIONS
STEP 10
Align and fasten right leg frame to table top and trestle bar using long bolt and barrel nut and tighten with Allen wrench.
3
3
G
2
H
1
2
1
G
STEP 11
Insert wood plug into leg frames.
6
Loading...