Page 1
Wood Swivel Stool
Page 1 of 2
Counter Stool
Barstool
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required.
QTYCODE HARDWARE
14
1
2
3
4
5
6
7
M6 x 50mm Allen Bolts
4
M6 x 40mm Allen Bolts
4
M6 x 35mm Allen Bolts
22
Spring Washers
4
Small Flat Washers
18
Large Flat Washers
1
Allen Wrench
A
QTYCODE COMPONENTSCOMPONENTS CODE QTY
1A B Seat BaseStool Back
4C D Top Support RingLegs 1
E Boom Support Ring1
1
B
D
C
C
C
C
WARNING
• Do not let any sharp objects touch or rub
the surface of the product.
• When assembling, do not let children play
around the working area.
E
CARE & MAINTENANCE: The touch of a so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
• Please confirm all parts are correct before
starng the assembly process.
• Do not ghten all bolts and screws
completely unl the enre unit has been
assembled and set up.
• Be careful if using power tools as they can
over ghten screws and strip threads.
Page 2
Wood Swivel Stool
Counter Stool
Barstool
Page 2 of 2
STEP 1 - Figure 1
1
4
Begin assembly by aaching Seat Base (B) to Stool Back (A).
Once in place, secure each arm of Stool Back (A) using 3
Allen Bolts (1), 3 Spring Washers (4) and 3 Large Flat
Washers (6) per side. Tighen all bolts using Allen
Wrench (G) provided.
6
FIGURE 1
B
A
STEP 2 - Figure 2
Aach each Leg (C) to Top Support Ring (D). During
assembly secure from inside using 2 Allen Bolts (1), 2
Spring Washers (4) and 2 Large Flat Washers (6).
C
FIGURE 2
D
C
2
4
5
2
4
5
C
E
1
C
4
6
STEP 3 - Figure 2
Slowly aach Boom Support Ring (E) in between Legs
(C) using 1 Allen Bolt (2), 1 Spring Washer (4) and 1
Small Flat Washer (5) per leg. Tighten all bolts from
steps 1 to 3.
STEP 4 - Figure 3
Aach swivel plate from Top Support Ring (D) to the
boom of Seat Base (B) using 4 Allen Bolts (3), 4 Spring
Washers (4) and 4 Large Flat Washers (6). Tighten all
bolts using Allen Wrench (7) provided. The assembly is
now complete.
B
FIGURE 3
3
4
D
6
B
CARE & MAINTENANCE: The touch of a so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
Loading...