Page 1
Label Picture Description QTY
A Chair Base 1
B Chair Backrest 1
Assembly Instructions
Caution: You must read this before you proceed
Glider Recliner with Swivel
Part List
Page 1 OF 10
Page 2
C Left Wing 1
D Right Wing 1
Before
Begining
Assembly:
Assembly Preparation
Page 2 OF 10
Page 3
Assembly Steps
This Recliner Chair has multiple parts and may require about 30 minutes
to assemble. To give you an overview of the Recliner Chair parts, the
above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.
Take the Chair Backrest(B) out from Chair Base(A).
Place the Chair Base(A) facedown on a clean, non-marring surface.
Overview
Step 1
FRONT FACING
Chair Backrest (B)
Chair Base (A)
Left Wing (C)
A
Right Wing (D)
B
B
Page 3 OF 10
Page 4
Step 2
Step 3
Take out the non-woven bags from the bottom of Chair Base(A) and
open the non-woven bags to take out the Left Wing(C) and Right
Wing(D).
With assistance from your adult partner, hold up the Chair Backrest(B),
and stand behind the Chair Base(A).
Insert the small metal arms on the sides of the Chair Backrest(B) into
the prefabricated slide lock gadget on the Chair Base(A) as shown
above.
Firmly but gently, push the Backrest downwards until it is fully slotted
and locked into position.
B
A
C
D
Insert
Page 4 OF 10
Page 5
Step 5
Align the mounting brackets of the Right Wing(D) with those on the right
side of Chair Backrest(B).
Then slide mounting brackets together until they lock into position as
shown above.
Step 4
Repeat the same process to align the Left Wing(C) with those on the
Left side of Chair Backrest(B).
D
D
B
A
Insert
Insert
B
A
C
A
B
D
C
Page 5 OF 10
Page 6
Step 6
Make sure all parts are connected and securely locked into position.
Your Recliner Chair is ready for use.
This Recliner Chair can only be used on a flat, level surface.
Step 7
Smooth down the fabric flap on the Chair Backrest(B).
Run your hands down both sides of the flap, from top to bottom, allowing
the velcro tape to adhere to the flap under the seat of the Recliner Chair.
Velcro
B
A
Page 6 OF 10
Page 7
Step 8
Step 9
Disassembly Instructions
Pull up on the Right Wing(D) and the Left Wing(C) one by one until to be
taken off from the Backrest(B) as pictured .
To Disassemble Recliner:
Open the flap on the Backrest(A), use a screwdriver (Don't use your
fingers) pressing outward on the metal ear on the preattached Metal
Bracket on one side of the Chair Base(B).
With assistance of your adult partner to keep the Chair Base(B) in place,
pull the Backrest(A) upward at the same time, repeat the same step for
another side.
D
C
D
B
C
A
C
A
A
B
B
Page 7 OF 10
Page 8
Warning
This is a Recliner Chair. At anytime in a reclined seat position or in the upright
position. You may enjoy the rocking motion by using your body weight in a backfront rocking motion, and swivel motion as well.
Supervise children, when in use of this Recliner.
Keep hands and feet clear of the footrest mechanism and any gaps.
Do not allow children to play on the chair.
Always leave the chair in an upright and closed position after use.
Do not sit on the arms of the recliner.
Do not stand upon the recliner.
Only the occupant should operate the chair.
User Instructions.
Glider Recliner With Swivel
Please read the Instruction Manual below carefully before use.
Page 8 OF 10
Page 9
To move the Chair back into the Upright position:
Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your feet to push the Footrest down.
The Chair will automatically lock when it is in the fully upright position.
Where necessary, use your arms help lift/push yourself out of the seat
To get into the Recline position:
Sit into the seat.
Open the trigger on the outside of right armrest.
Use your body weight and push backwards into the seat into a fully reclined
position.
Page 9 OF 10
Page 10
Page 10 OF 10
Loading...