Page 1
Caution :You must read this before you proceed
Right Arm Sofa
Label Picture Description QTY
A Seat Frame 1
B Backrest 1
C Back Cushion 1
D Leg 4
E Right Arm 1
1 of 8
Page 2
Label Picture Description QTY
①
②
③
④
⑤
⑥
⑦
Before Beginning Assembly:
Washer Ring 7
Allen key 1
Bolt M8*50mm 3
Bolt M8*20mm 2
Spring Washer 4
Flat Washer 4
Connecting Piece 1
2 of 8
Page 3
Seat Frame (A)
Back Cushion (C)
Backrest ( B)
Right Arm (E)
Leg (D)
Leg (D)
Leg (D)
FRONT FACING
This Right Arm Sofa has multiple parts and may require up to some 30
minutes to assemble. To give you an overview of the Right Arm Sofa
parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Step 1
A
E
C
Position the seat Frame (A) on its back,as shown.
Unzip to open pouch and remove the 4 wooden legs , Back Cushion ( C )
and hardware, close the pouch.
3 of 8
Page 4
Step 2
A
Stand the Seat Frame (A) up as show in the left Picture.
Attach the Connecting Piece(⑦) to Seat Frame (A) using Bolts(④), Spring
Washers(⑤), and Flat Washer (⑥) with Allen Key(②) as shown in the
right picture.
Step 3
A
E
Attach the Right Arm (E) to Seat Frame (A) on the other side by using
Bolts(③), Spring Wa shers(⑤), and Flat Washer (⑥) with Allen Key(②) as
shown in the picture.
Step 4
D
Washer Ring(①)
A
E
D
D
4 of 8
Page 5
Install the Legs(D) into the bottom of the Seat Frame (A) by placing a
Washer Ring(①) onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at
each Corner of the Bottom of the Seat(A).
Tighten by turning the Legs clockwise.
Note: The use of Washer Rings(①) are OPTIONAL and are especially
useful to help alleviate slight wobbles. Some Legs may need more than
one Washer Ring whilst some Legs may not need any.
Position arm sofa right side up and test for stability on a Level Surface.
Add or remove Washer Rings(①) where needed to achieve stability.
Step 5
D
D
D
Seat Frame (A)
D
Cover the bottom of the Seat Frame (A) with the non-woven fabric.
Smooth down the Magic Tape on all four sides of the Seat by hand.
Step 6
Backrest (B)
Right
Arm(E)
Seat Frame (A)
5 of 8
Page 6
Position right arm sofa right side up.
Align the mounting positions on the Seat Frame (A) .
Insert the Backrest (B) into the Seat Frame (A) as shown in above picture.
Step 7
Back
Cushion (C)
Put the Back Cushion(C) on the Right Arm Sofa.
Step 8
Your Right Arm Sofa is ready for use.
Your Right Arm Sofa can only be used on a flat, level surface.
6 of 8
Page 7
If you already purchased 2 or more than 2 products, Please
p
read on
Step 1
⑦
⑦
⑦
⑦
Connecting the two sofas by using the pre-fixed Connecting Piece (⑦) as
shown in the picture.
Step 2
2.1
Ste
Step2.2
Step2.3
Step2.4
Note: This is optional step in case we want to connect all sofas in a set
together and to match the environment of your home.
7 of 8
Page 8
8 of 8
Loading...