Page 1
GROMMET CURTAIN INSTALLATION INSTRUCTIONS
Getting started:
Please read through all instructions carefully before you begin installation. Carefully remove your new curtains from their packaging. Before hanging your
curtains, We recommend that you have them professionally pressed to remove fold lines and wrinkles. If you need to remove the wrinkles yourself it is
recommended that you use a garment steamer after the draperies are hung. If you do not have access to a garment steamer the panels can be steamed from the
back of the drape using a steam iron.
NEVER make contact directly with the face of the curtain, especially silk, faux silk, or Velvet panels. Making contact with these fabrics can permanently damage
the fabric and leave a mark that cannot be removed.
Installing Your Grommet Curtains:
You are now ready to hang your curtains.
1. Starting from the front side of the panel thread the rod into the first hole on either end of the panel.
Continue weaving the rest of the grommets on to the rod.
Dressing Your Curtains:
To help the curtain hang properly, and create a ripple, slide the rings next to each other on the rod and pull the fabric between the rings forward.
If you steam the folds in place it will help “train” the curtains so that the folds/ripples stay in place after they are opened and closed.
Care & Cleaning:
If the curtain is dusty, simply vacuum over it using an upholstery attachment. For stubborn stains or overall deep cleaning,
professional on-site service is recommended.
Loading...