Page 1
Hall Tree & Storage Bench
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
BASE UNIT PART LIST
A.
Seat
1 pc.
D.
Front Panel
1 pc.
HARDWARE LIST
Head Cap Bolt
(short)
3 pcs.(+ 1 extra)
E.
Back Panel
1 pc.
B.
Side Panel
C.
Side Panel
.1pc
1 pc.
F.
Base
1 pc.
Wood Screw
(for Spring Support)
4 pcs.(+1 extra)
Hex Wrench
1 pc.
Head Cap Bolt
(long)
8 pcs.(+1 extra)
Cross Dowel
8 pcs.(+1 extra)
Tools Required For Assembly : Phillips screwdriver
Spring Support
1 pc.
Wood Plug
8 pcs. (+1 extra)
Page 2
Assembly Instructions
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you may need to tighten up
the Head Cap Bolts in the future.
Head Cap Bolt
(long)
STEP 1
Insert Cross Dowels into the
holes of Front Panel (D) and
Back Panel (E).
Attach the Side Panel (B) and (C)
to the Front Panel and Back Panel
with Head Cap Bolts.(See figure 1)
Wood Screw
B
STEP 2
Turn over the Seat (A).
Cross Dowel
E
E
D
Figure 1
Cross Dowel
C
Head Cap Bolt
(long)
A
Figure 2
STEP 3
Attach the Seat (A) to the unit
with Head Cap Bolts (short).
Place the Base (F) into the storage unit.
STEP 4
Attach Spring Support to the
Seat (A) with Wood Screws.
(See figure 2)
Head Cap Bolt
(short)
F
A
Cover all holes with
Wood Plugs
Page 3
Hall Tree & Storage Bench
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
TOP UNIT PART LIST
G.
Top
1 pc.
HARDWARE LIST
J.
Upper
Back Frame
1 pc.
K.
Back Frame
2pcs.
L.
Lower
Back Frame
1 pc.
H.
Side Panel
M.
Arm
1 pc.
I.
Side Panel
.1pc
1 pc.
N.
Arm
1 pc.
Head Cap Bolt
(short)
20 pcs.(+1 extra)
Hook
4 pcs.
Tools Required For Assembly : Phillips screwdriver
Wood Screw
8 pcs.
(+1 extra)
Wood Plug
8 pcs.
(+1 extra)
Page 4
STEP 1
Assembly Instructions 2/3
Attach the Hooks to the Upper Back Frame (J)
with Wood Screws.
(See figure 3)
K
K
L
J
Figure 3
J
STEP 2
Assemble the Lower Back Frame(L),
Upper Back Frame (J) and Back Frame (K).
Head Cap Bolt (short)
H
STEP 3
Attach the Side Frame (H) and (I)
to the assembled unit with Head Cap Bolts.
I
Head Cap Bolt (short)
Page 5
Assembly Instructions 3/3
Head Cap Bolt (short)
G
M
H
Head Cap Bolt (short)
N
STEP 4
Attach the Top (G) to the
Attach the Arm (M) and (N) to the Side Panels with Head Cap Bolts.
Side Panel (H) and (I) with Head Cap Bolts.
I
STEP 5
Place the Top Unit onto the Base Unit and
attach with Head Cap Bolts.
Head Cap Bolt (short)
STEP 6
Cover all holes with
Wood Plugs
Head Cap Bolt (short)
Loading...