Page 1
HEADBOARD ASSEMBLY INSTRUCTIONS
PARTS LIST:
(A) M8 bolts x4
(B) Big Washers x4
(C) Wrench x1
(D) M6 Bolts x4
(E) Small Washers x4
(F) Nuts x4
(G) Headboard Mount x2
(H) Wall Mount x2
(I) Screws x16
(J) Drywall Anchor x8
(K) Hex key 65mm
(L) Hex key 70mm
(A)
(D)
(G)
(K)
(L)
STEP 1
Remove the headboard from the box and
lay it face down on the ground. Open the
velcro panel on the back and remove both
the legs and hardware.
STEP 2
Using two (A) M8 bolts, two (B) big washers
and the provided holes, secure both legs to
the headboard at your desired height with
the (L) hex key provided. (see Figure 1)
(B) (C)
(E)
(H)
(F)
Figure 1
Figure 2
(G) Headboard Mount
(I)
(J)
(G) Headboard Mount
(A) M8 Bolts
(B) Big Washers
Mounting Block
Mounting Block
(A) M8 Bolts
(B) Big Washers
Legs
(G) Headboard Mount
(G) Headboard Mount
STEP 3
(recommended)
Using the mounting blocks on the back of your headboard,
screw the two (G) headboard mounts to the top of your
headboard with the provided (I) screws. Using the remaining
(I) screws, attach the (H) wall mounts to your wall. Make sure
to place the wall mounts at the correct height to pair with
your previously installed (G) headboard mounts (see figure
2). If no wall studs are available to secure the headboard to
your wall, use the provided (J) drywall anchors instead. Lift
the headboard and lower into place to join the (G) and (H)
mounts together.
STEP 4
With the front side of the headboard facing the bed frame,
attach the headboard to the frame using the (D) M6 bolts
and (K) hex key, (E) small washers and (F) nuts.
If your bed frame doesn’t fit the headboard, use the provided
modification plates to secure the bed frame to the headboard. More
instructions are included with the plates.
Failure to follow these warnings and assembly instructions could result in
serious injury or death. Read all instructions before assembling the
headboard. Keep the assembly instructions for future use. Before each usage
or assembly, inspect the headboard for damaged hardware, or missing parts.
DO NOT use the headboard if any parts are missing or broken. If replacement
parts and instructional literature are needed contact the manufacturer. DO
NOT substitute parts.
Figure 3
Bed Frame
(G) Headboard Mount
Wall
(I) Screws x4
(I) Screws x4
(H) Wall Mount
(J) Drywall Anchor x4
(if needed in step 3)
Headboard
Top of the Headboard
(E) Small Washers
(F) Nuts
(D) M6 Bolts
Page 2
LIFETIME LIMITED WARRANTY
WHAT IS COVERED
This warranty covers any defects in
materials or workmanship, with the
exceptions stated below.
HOW LONG COVERAGE LASTS
This warranty runs for as long as the
original purchaser owns the product.
WHAT IS NOT COVERED
The warranty applies only to the original
purchaser and does not cover: (a) wear
and tear; (b) improper maintenance,
misuse, or alteration; (c) repair by
unauthorized representatives; (d) damage
resulting from transit or handling; or (e)
transportation costs.
HOW STATE LAW APPLIES
This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state.
The foregoing warranty shall be exclusive and
in lieu of any other warranty, express or
implied, including warranties of
merchantability and fitness for a particular
purpose and all other warranties otherwise
arising by operation of law, course of dealing,
custom, trade, or otherwise. Neither the seller
nor the manufacturer shall be liable for any
injury, loss or damage, direct or consequential
arising out of the use or inability to use this
product.
WHAT WE WILL DO
We will repair, replace, or refund any
product that proves to be defective in
materials or workmanship.
HOW TO GET SERVICE
E-mail us to submit your warranty claim.
Please keep your receipt so that we may
process your warranty request.
Loading...