Page 1
Happy?
Please leave us a review!
You can make others happy too!
A
R
N
R
T
A
Y
W
1
1
R
Y
A
E
Page 2
IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY.
Safety
For domestic use only.
Don't tighten all the bolts before the product is fully assembled.
It would be useful to ask someone to help you assemble
the product.
Periodic structural checks of this product should be
undertaken, do not use if you have any doubts about its
Do not stand on the seat and table.
Do not sit on the armrest and table.
Do not let children play with this product.
Maximum load per seat: 250 lbs.
At the beginning of the season
product are secure, do not use if you have any doubts
At the end of the season
This product should be stored under cover during
prolonged spells of adverse weather (wet or cold) and
also during the winter (ideally in a garden shed or
garage).
Always clean and dry thoroughly before storage.
- 1 -
Page 3
Tips for Cushions
In order to compress the package, we put the cushions in
the gap of some parts. So there may be crinkle on the fabric.
Don’t worry. Just flap every corner of the cushion evenly and
it will get back into its original shape soon.
1
3
2
OK
- 2 -
Page 4
COMPONENT LIST - LOVESEAT
Item
no.
B
B1
C
D
E
Reference
Image
Description Qty.
Right Armrest
Left Armrest
Seat Base
Seat Back
Washer
1
1
1
1
12
F
G
M6X20
Head Cap Screws
M6X40
Head Cap Screws
- 3 -
2
10
Page 5
COMPONENT LIST - LOVESEAT
Item
no.
L
S
T
Reference
Image
Description Qty.
Allen Key
Seat Cushion
Back Cushion
1
1
2
NOTE:
When tightening the Screws, tighten sequentially.
DO NOT tighten any Screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
bolts and execute this same process.
If the Loveseat is not stable it could lead to damage to the product.
- 4 -
Page 6
Attach the Seat Back (D) to the Right Armrest (B) by securing
1
with M6*40 Head Cap Screws (G) and Washers (E). Do this in 2
places.
D
E
G
B
x1
E
G
x1
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 5 -
Page 7
Attach the Seat Base (C) to the Seat Back (D) and the Right
E
F
2
Armrest (B) by securing with M6*40 Head Cap Screws (G)
and Washers (E). Do this in 4 places.
Attach the Seat Base (C) to the Right Armrest (B) by securing
with M6*20 Head Cap Screws (F) and Washers (E). Do this in
1 places.
C
B
G
E
x1
x4
D
x5
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 6 -
Page 8
Attach the Left Armrest (B1) to the Seat Base (C) and the
E
F
3
Seat Back (D) by securing with M6*40 Head Cap Screws (G)
and Washers (E). Do this in 4 places.
Attach the Left Armrest (B1) to the Seat Base (C) by securing
with M6*20 Head Cap Screws (F) and Washers (E). Do this in
1 places.
B
D
C
B1
x1
G
E
x3
E
G
x1
x5
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 7 -
Page 9
Tighten all 12 Screws into place with Allen Key (L).
4
Loveseat is completed.
L
x12
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED,
LOOSEN ALL THE SCREWS AND GO BACK STEP
1 AND RESTART ASSEMBLY.
- 8 -
Page 10
5
Place the Loveseat on a level surface.Place Seat Cushions
(S) and Pillows (T) on the Loveseat. Your Loveseat is ready
for use.
T
S
- 9 -
Page 11
COMPONENT LIST - TABLE
Item
no.
H
J
M
O
P
Reference
Image
Description Qty.
Table Base
Table Top
Table Leg
Table Leg
Table Leg
1
1
1
1
2
E
E1
F
Washer
Plastic Washer
M6X20
Head Cap Screws
- 10 -
16
2
2
Page 12
COMPONENT LIST - TABLE
Item
no.
Reference
Image
Description Qty.
M6X35
G
L
I
Head Cap Screws
Allen Key
Table Cushion
14
1
1
NOTE:
When tightening the Screws, tighten sequentially.
DO NOT tighten any Screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
bolts and execute this same process.
If the Table is not stable it could lead to damage to the product.
- 11 -
Page 13
Attach the Table Base (H) to the Table Leg (M)&(O) by securing
1
with M6*35 Head Cap Screws (G) and Washers (E). Do this in 6
places.
E
G
x6
M
H
O
x6
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 12 -
Page 14
Attach the Table Legs (P) to the Table Leg (M)&(O) by
2
securing with M6*35 Head Cap Screws (G) and Washers (E).
Do this in 8 places.
E
G
P
M
x8
P
O
x8
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 13 -
Page 15
Attach the Table Top (J) to the Table Leg (M) by securing with
3
M6*20 Head Cap Screws (F) and Washers (E) & Washers (E1).
Do this in 2 places.
J
E1
E
F
P
M
P
O
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 14 -
Page 16
Tighten all 16 Screws into place with Allen Key (L).
4
Table is completed.
L
x16
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED,
LOOSEN ALL THE SCREWS AND GO BACK STEP
1 AND RESTART ASSEMBLY.
- 15 -
Page 17
5
Place the Table on a level surface and adjust height for balance.
Place the Table Cushion (I) on the table. Your Table is ready for
use.
I
Adjust Pre-installed levellers
height for balance
Adjust height
for balance
- 16 -
Adjust low
for balance
Loading...