Page 1
1.Do not tighten the screws before installation, and then
tighten them one by one after installation.
2. Do not screw too tight, or the material may burst.
3. Use the hexagon wrench, contact the screw with the
short part and turn the long part by hand.
Install No. 3 stakes and No. 2 stakes on the
bottom plate.
Install the No.4 shelf between the NO.2 stake,
fix with screw A
Fix two No. 5 shelf to the third hole of NO.2 stake
and the second hole of NO.3 stake, and fix them
with screw A
Install shelf No. 4 to the fourth hole of stake
No. 2(on the outer side). Fix with screw A
Fix shelf No. 6 to the fifth hole of stake No. 2 and
the third hole of stake No. 3 (on the outer side)
with screw A
Fix shelf No. 7 to the top hole of stake No. 2,
secure with screw A
Loading...