Page 1
Assembly Instruction
P
d
t
N
s
complete!
-Upholstered Bar Stools(set of 2)
lease check that you have all the parts listed before you start assembling,if you do fin
hat something is missing,do not continue assembly,please contact us immediately.
OTE:Please do not completely tighten all the hardware until the entire assembly i
Part List
No. Description Diagram
1
Backrest
Seat Frame
2
Front Legs
3
4
5
6
7
(Left)
Front Legs
(Right)
Side stretcher
(Left)
Side stretcher
(Front)
Side stretcher
(Right)
Hareware
Qty
pcs
1
1
1
1
1
1
1
No. Description Diagram
A
B
C
D
E
F
G
H
Dowel
Short Bolt
Middle Bolt
Long Bolt
Flat Washer
Spring Washer
Allen Key
Selftapping
Screw
5/16*57mm
5/16*52mm
5/16*90mm
10*30
5/16
5/16
M5
8*45
Qty
pcs
1
2
4
4
10
10
1
6
Page 2
Step 1 Step 2
Open the velcro strips on the edge of the seat frame,
attach the seat frame (2) to the backrest (1), using the
Stick the dowel(A) in the seat frame(2)
allen key (G) to fully fasten 6pcs bolt (B and D), 6pcs
flat washer (E) and 6pcs spring washer (F).
Step 3 Step 4
Insert the side strechers(5) and (7) as showed in
above figure.
Step 5
Secure with 6pcs selftapping screw(H) as showed in above figure. Note: If you have
trouble inserting the strechers , loosen the bolts slightly to allow for extra space.Turn
stool upright on its legs and place on a flat,level floor, make sure that the stool is
level and square. Tighten all the bolts completely with Allen key(G).
Using the allen key(G) to fasten 4pcs bolt(C) and
4pcs flat washer(E)and 4pcs spring washer(F).
Loading...