Page 1
1 / 7
INSTRUCTION MANUAL
Part List
Description
Qty.
Drawings
A
Bolt(T1-M5*12)
18
B
Nut(M6)
20
C
Bolt(T2-M6*12)
4
D
Spacer(M6)
4
E
Allen Wrench
1
F
Screwdriver
1
G
Rotary Grill Set Screw
2
H
Lid Ring
1
I1
Frame A
2
I2
Frame B
2
J
Bowl
1
Please check all packing material carefully before discarding, as some parts
may be encased in the packing material.
Part List
Page 2
2 / 7
K
Log Grate
1
L
Mesh Lid
1
M
Fixed Mount
2
N
Rotate Grill Axel A
1
O
Rotate Grill Axel B
1
P
Fixed Fork Claw
2
Q1
Ladder Frame A
2
Q2
Ladder Frame B
2
R
Poker
1
S
Corner Post
4
T1
Ceramic tile A
4
T2
Ceramic tile B
4
T3
Ceramic tile C
4
U
Plastic feet
4
Page 3
3 / 7
Special Warnings
Check local bylaws before using the fire pit.
NOT for use by children. Keep children and pets away from the fire pit.
Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
NEVER leave burning fire pit unattended and always extinguish fire
completely before leaving the fire pit.
Keep the fire pit at least 20 feet away from any flammable surface or
dwelling.
DO NOT use near flammable or combustible objects or materials.
Always use gloves and protective glasses when loading the fire pit or
extinguishing the fire.
Have a fire extinguisher available near the fire pit in case of emergency.
Operation Instructions
Please use Poker (provided) when handling.
We do not recommend pouring water over the fire unless necessary. The
fire should be allowed to expire on its own.
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years. The
frame structure of this unit is made of powder-coated steel extrusion and
should resist rusting under normal use. Should rusting occur, we suggest using
a steel brush on the affected area followed by a spray coating of high
temperature anti-rust paint. For additional rust proofing of the bowl, grate
and mesh lid we recommend that a coat of high temperature primer is applied
before use. You may cover the fire pit with a Protective Cover when the fire
pit is not in use. Ensure the fire pit has completely cooled down before using
the Protective Cover.
Assembly Instructions
Estimated Assembly Time: 20 Minutes.
DO NOT over tighten hardware!
Page 4
4 / 7
Step 1. Place Mantle parts on a soft, even clean surface with the groove sides upwards
to form a rectangle. Connect each by using Bolts (A). (View Fig 1)
Step 2.Put Plastic feet(U) on the Corner Post l (S). (View Fig 2) .
Step 3.Mount Ladder Frame A(Q1) and Ladder Frame B(Q2) to the studs
(pre-installed) on the Corner Posts (S)by using Nut(B). (View Fig 3)
Page 5
5 / 7
Step 4 . Attach the Frame (I) to Corner Post (S) by using Bolts (C)、Spacer(D) and Nut(B).
M
(View Fig 4)
Step 5. Attach the Fixed Mount (M) to Ladder Frame B(Q2) by using Bolts (A).(View Fig 5)
Step 6. Attach the Fixed Fork Claw (P) to Rotate Grill Axel A(N) and Rotate Grill Axe B（O）
by using Rotary Grill Set Screw(G)
.(View Fig 6)
Page 6
6 / 7
Step 7.Affix Lid Ring (H) to the Mesh Lid (L) by screwing the lid ring into the upper hole of the mesh lid.
(View Fig 7)
Step 8.Place Square Bowl (J) on the base。(View Fig 8)
Step 9.Put Log Grate (K) in the Square Bowl (J). (View Fig 9)
Step 10. Place the mesh lid(L) on the square bowl. (View Fig 10)
.
Page 7
7 / 7
Step 11. Place the Rotate on Fixed Moun(M). (View Fig 11)
FIG12
Step 12. Place the Ceramic tile on Frame(A).(View Fig 12)
WARNING!
The use of alcohol, prescription or non-prescription drugs may impair
the ability to properly assemble or safely operate this fire pit.
When using this fire pit, exercise the same precautions you would with
any open fire.
Do not use this fire pit for indoor heating. Toxic carbon monoxide fumes
can accumulate and cause asphyxiation or death.
Loading...