Red Barrel Studio W003416241 Installation & Assembly

Converting to Chaise Lounge position

Lift the leg rest cushion and push the support leg back to the bottom of the cushion,
then carefully place the cushion on the floor.

To Ottoman

4 of 4

PARTS AND HARDWARE

Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.

Converting to Bed

Lift the backrest all the way upwards until the last click is heard (which unlocks the mechanism) and
carefully return to a flat position. Next, open the two shortest skirt covers and lift the chair cushion
upwards until it stops. Then lift the bottom cushion by the support leg to flip over the cushion and
rest the support leg on the floor. Fix the two short skirt covers the base frame by magnet. Finally,
place the pillow as desired.

Ottoman Unit

1x

THIS UNIT DOES NOT REQUIRE ANY ASSEMBLY

Pillow

1x

OPERATING YOUR UNIT

Converting to Chair

Lift up all four sides of the ottoman skirting. Standing at the side of the unit, lift the top seat
cushion completely upright, fix the two longest skirt covers to the magnet, then lift the support
leg of the headrest (second cushion) and flip it over. Next, carefully set down the top upright
seat cushion, fix the two short skirt covers to the base frame by magnet and then convert the
backrest as desired with the sound of each click. Finally place the pillow as desired.

Converting to Chaise

Standing at the side of the unit, lift the back-rest to the desired position and secure it in
place by releasing to the sound of a click. Place the pillow as desired.

2 of 4

3 of 4