Page 1
29’’ SADDLE STOOL
ASSEMBLY INSTRUCTIONS
WARNING
1. Do not use this product unless all screws and bolts are securely
tightened.
2. Check that all screws and bolts are tight every three months or as
needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.
LIMITED WARRANTY
Our chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option we will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by us.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor, freight
or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of us. The warranty
does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of
injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by us.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail or toll free parts number.
Page 2
PARTS LIST
(A) Saddle Seat (1 PC) (B1) Leg (2 PCS)
(B2) Leg (2 PCS)
(D) Long Stretcher (2 PCS)
(C) Short Stretcher (2 PCS)
HARDWARE LIST
DRAWINGNO DESCRIPTION SIZE QUANTITY
1
2
Bolt 8 PCS5/16’’ x 2’’
Wood Screw
1 3/4’’
8 PCS
3
4
5
Phillips screwdriver also needed for assembly (not provided)
Lock Washer
Flat Washer
Allen Wrench
5/16’’
5/16’’
5 mm
8 PCS
8 PCS
1 PC
Page 3
STEP 1
(D)
(D)
(B2)
STEP 2
(B1)
(B2)
(2)
(C)
DO NOT FULLY TIGHTEN SCREWS
(B1)
(B1)
(2)
DO NOT FULLY TIGHTEN SCREWS
(B2)
Page 4
STEP 3
(B)
(4)
(3)
(1)
(5)
APPLY FIRM PRESSURE TO ALIGN. FULLY TIGHTEN ALL BOLTS & SCREWS
Loading...