Page 1
1/6
STANDARD BED
IMPORTANT NOTE
1. PLEASE CHECK THAT ALL PARTS ARE PRESENT BEFORE YOU START
THE ASSEMBLY OF YOUR FURNITURE.
2. FOR THE PROTECTION OF YOUR FURNITURE, PLACE ALL PARTS ON A
CLEAN AND SMOOTH SURFACE TO PREVENT ANY DAMAGE.
3. DO NOT USE POWER TOOLS TO ASSEMBLE THE BED.
4. PLEASE PERIODICALLY CHECK ALL FITTINGS AND RE-TIGHTEN AS
NECESSARY.
5. DO NOT USE THE BED UNLESS ALL BOLTS AND SCREWS ARE FIRMLY
SECURED.
6. NEED PARTS OR ASSISTANCE? EMAIL US.
7. YOU CAN ASSEMBLE IT WITH OUR PACKAGING TOOLS OR WITH A
HOME ELECTRIC DRILL, AS SHOWN BELOW.
Page 2
PART LIST
(1)Headboard Pane x 1pc
(4)Side Rail II x 2pcs
(7)Support Leg II x 2pcs
(2)Footboard x 1pc
(5)Leg x 2pcs
(8)Headboard support
x 2pcs
(3)Side Rail I x 2pcs
(6)Support Leg x 6pcs
(9)Centre Support Bar
x 2pcs
(10)Slat x 2pcs
(11)Support Bar x 4pcs
HARDWARE LIST
(H1)Bolt M8 x 20mm x 4pcs
(H4)Spring Washer x 22pcs (H5)Flat Washer x 34pcs (H6)Allen Key M5 x 1pc
(H7)Screw M4 x 30mm
x 18pcs
(H2)Bolt M8 x 35mm
x 24pcs
(H8)Screw M4 x 45mm
x 6pcs
(H3)Bolt M8 x 40mm x 6pcs
2/6
Page 3
8
H6
H3
H4
H5
STEP 1 SCREW LEGS (5) INTO FOOTBOARD (2).
3/6
X 2
STEP 3 FIXING SUPPORT LEG II (7) TO SIDE RAIL I (3) AND SIDE RAIL II (4). SECURE
USING FIXINGS (H2), (H4), (H5) AND (H6).
X 2
X 2
STEP 2 FIXING HEADBOARD SUPPORT (8) TO HEADBOARD PANE (1). SECURE USING
FIXINGS (H3), (H4), (H5) AND (H6).
2
2
1
1
3
4
3
4
5
7
7
8
8
H6
H2
H4
H5
Page 4
STEP 5 FIXING Support Bar (11) TO SIDE RAIL I (3) AND SIDE RAIL II (4). SECURE USING
FIXINGS (H2), (H5) AND (H6).
4/6
10mm
X 2
X 4
STEP 4 FIXING SIDE RAIL I (3) AND SIDE RAIL II (4) TO HEADBOARD SUPPORT (8).
SECURE USING FIXINGS (H1), (H4), (H5) AND (H6).FIXING SIDE RAIL I (3) AND SIDE
RAIL II (4) TO FOOTBOARD (2). SECURE USING FIXINGS (H2), (H4), (H5) AND (H6).
10mm
X 2
2
2
2
1
3
4
3
4
3
4
3
4
3
4
3 & 4
8
8
8
8
11
H6
H6
H6
H2
H5
H5
H4
H1
H2
H4
H5
Page 5
10
5/6
STEP 6 FIXING SUPPORT LEG (6) TO CENTRE SUPPORT BAR (9) BY USING (H8).
X 2
X 3
STEP 7 FIXING SLAT (10) TO SUPPORT BAR (11) AND CENTRE SUPPORT BAR (9) BY
USING (H7).
6
6
6
6
6
6
10
9
9
H8
H8
H8
H7
H7
X 6
10
9
9
3
4
3 & 4
Page 6
10
6/6
Job Complete !
In the interest of our environment please dispose of all packaging thoughtfully.
STEP 8 FIXING SLAT (10) TO SUPPORT BAR (11) AND CENTRE SUPPORT BAR (9) BY
USING (H7).
X 3
10
H7
H7
X 6
10
9
3 & 4
4
3
Loading...