Page 1
IMPORTANT!! PLEASE READ ENTIRE
INSTRUCTION SHEET BEFORE ASSEMBLY!!
4PCS Seating Set
Identify all parts packed in the carton against the parts list. Remove all protective
materials. Place parts on a non-abrasive surface. If you are missing any parts or
Are unsure how to proceed with assembly, please call customer service center.
Do not attempt to assemble the product if any parts are missing or damaged.
PART LIST
LOVESEAT
Step 1
Place right armrest (B) on a flat, soft surface.
Attach Loveseat seat (D) to the armrest (B) by using bolts (AA) with metal washers (EE)
through each hole of the seat into the right armrest (B).
Repeat for the left armrest (A).
NOTE: Do not fully tighten the bolts.
Left Chair&
A
Loveseat Armrest
Right Chair&
B
Loveseat Armrest
C
Loveseat Back
Loveseat Seat
D
E
Chair Back
Chair Seat
F
Coffee Table Top
G
Coffee Table Leg A
H1
3
3
1
1
2
EE
2
1
2
GG
Coffee Table Tray
I
AA
M6x30mm Bolt
BB
M6x35mm Bolt
M6x16mm Bolt
CC
M6X20mm Bolt
DD
M6 Washer
M6 Plastic Cap
FF
M6 Plastic Cap
12
19
31
31
12
1
Step 2
Attach the Loveseat back(C) to the right armrest (B) by inserting bolts (BB)
with metal washers (EE) through each hole of the loveseat back (C) into the
right armrest (B).
4
8
Repeat for the left armrest (A).
Coffee Table Leg B
H2
2
HH
Allen Wrench
2
- 1-
Page 2
Step 3
Attach Loveseat seat (D) to the Loveseat back (C) by using bolts (BB) with
mental washers (EE) through each hole of the seat into the loveseat back (C).
Tighten all bolts with the Allen wrench (HH).
Cover all bolts with the plastic caps (FF).
Place the cushions on the Loveseat seat.
CHAIR
Step 1
Place right armrest (B) on a flat, soft surface
Attach chair seat (F) to the armrest (B) by using bolts (AA) with metal
washers (EE) through each hole of the seat into the right armrest (B).
Repeat for the left armrest (A).
NOTE: Do not fully tighten the bolts.
Now is ready for your enjoyment.
Step 2
Attach the chair back (E) to the right armrest (B) by inserting bolts
(BB) with metal washers (EE) through each hole of the chair back
(E) into the right armrest (B).
Repeat for the left armrest (A).
- 2-
Page 3
Step 3
Attach chair seat (F) to the chair back (E) by using bolts (BB) with metal
washers (EE) through each hole of the seat into the chair back (E).
Tighten all bolts with the Allen wrench (HH). Cover all bolts with the plastic caps
(FF).
Place the cushions on the chair seat.
COFFEE TABLE
Step 1
Place coffee table top (G) upside down on a flat, soft surface.
Attach the table legs (H1&H2) to table top (G) by inserting bolts (DD)
through the pre-drilled holes in the table top and legs.
Step 2
Attach the table tray (I) to table legs (H1&H2) by inserting bolts (CC)
through the pre-drilled holes in the table tray and legs.
Tighten all bolts with the Allen wrench (HH). Cover all bolts with the
plastic caps (GG).
Now is ready for your enjoyment.
Now is ready for your enjoyment.
-3-
Loading...