
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 20 MINUTES
PARTS IDENTIFICATION
PAGE 2 OF 6
A
HEADBOARD
PANEL
1PC
B
C
D BED RAIL 2PCS
E
F CENTER RAIL 1PC
G
HEADBOARD LEG
HEADBOARD LEG
LEFT
RIGHT
STORAGE
FOOTBOARD
CENTER RAIL
SUPPORT WITH
LEVELER
1PC
1PC
1PC
3PCS
H FOOTBOARD LEG 5PCS
I
ROLL SLAT
(8PCS)
1SET

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
2. This product is for home use only and not intended for commercial establishments.
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 6
1
BIG ALLEN WRENCH
(M5 - BLK)
1PC
2
3
4
5
6
7
SMALL
ALLEN WRENCH
(M4- BLK)
FLAT HEAD SCREW
(M4 x 35mm - RBW)
BOLT 2
(M6 x 40mm - RBW)
BOLT 3
(M6 x 50mm - RBW)
BOLT 1
(M6 x 30mm - RBW)
BOLT 4
(M6 x 70mm - RBW)
1PC
22PCS
6PCS
2PCS
1PC
5PCS

Note:Dimension tolerance +5%
INNER SIZE: 61” X 80.31”
INNER SIZE OF DRAWER: 4.92” X 14.56” X 28.11”