ASSEMBLY INSTRUCTIONS
Description
Dimension
Cube Size : 41”x20.2”x14”
NW: 24.2 LBS
GW: 33 LBS
Parson Chair
Parson Chair
:
: 18”Wx22.5"Dx38.5"H
- 1 -
NOT INCLUDED
BEFORE ASSEMBLY
Thank you for purchasing our product. This product has been designed for easy assembly and long
lasting use. Please take the time to read and follow the assembly instructions carefully
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A
C
Chair back 1
Front Leg 2
B
Seat Frame 1
Parson Chair
- 2 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
Long bolt
1
3
5
7
(M6x80mm)
Short bolt
(M6x40mm)
Flat Washer
(∅6.5x19)
Dowel
(∅10x30)
4
2
10
1
Medium bolt
2
4
6
(M6x60mm)
Lock Washer
(∅6.5x9)
Allen Key
(4mm)
4
10
1
STEP 1
Remove bottom out seat frame (c ) as shown below. After attach Dowel (7) to seat frame (c).
Parson Chair
- 3 -
STEP 2
O
t
h
e
r
w
i
s
e
,
t
h
e
c
h
a
i
r
w
i
l
l
b
e
w
o
b
b
l
y
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen
Key (6). Squeeze frame seat and Chair back when assembly
Note: DO NOT tighten any of the bolts, until the chair is assembled.
STEP 3
Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5).Tighten with Allen Key (6).
Attach bottom removed on the step 1 on seat frame.
.
C
h
e
e
d
c
g
k
e
t
o
s
a
m
r
e
a
k
f
l
e
u
s
s
h
u
r
o
e
r
t
a
w
l
i
o
g
n
e
d
.
c
Parson Chair
- 4 -
STEP 4
Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts.
Parson Chair
- 5 -
Loading...