ASSEMBLY INSTRUCTIONS
Description : RECTANGULAR DINING TABLE 36"x66" WITH BUTTERFLY LEAF
Dimension : W.36" x D.54"(66") x H.30"
Cube Size : 56.2”x38.3”x5.7” NW: 94.6 LBS
GW: 101.2 LBS
Rectangular Dining Table 36"x66" with butterfly leaf
- 1 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability.
Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have
the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1
B Table Leg 4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all
of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
3
Bolt
(M8x70)
Flat Washer
( Φ8.5xΦ19mm)
8
8
Rectangular Dining Table 36"x66" with butterfly leaf
- 2 -
Lock washer
2
( Φ8.5xΦ11mm)
4
Allen key
(M4mm)
8
1
STEP 1
Attach legs (B) to the top (A) with Bolts (1) and washers (2), (3). Tighten with the Allen Key (4).
B
B
B
B
A
STEP 2
Unlatch 2 end pieces of table top by the latches underneath table top. Pull the 2 ends of the
table top apart.
x2
Rectangular Dining Table 36"x66" with butterfly leaf
- 3 -
STEP 3
Unfold the butterfly leaf with the apron at both ends straightened up as shown on the Step 3.
Place flattened butterfly leaf at the center of the table. Then push two end pieces inward
making sure all pins & holes aligned. Latch them together by the 4 latches underneath table
top.
x4
Rectangular Dining Table 36"x66" with butterfly leaf
- 4 -
Loading...