STEP 2:
PARTS
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts that
may have come loose inside the carton during shipment.
Before you start assembly: Please read all instructions carefully before beginning the assembly process. It is
recommended that 2 people work together during assembly to prevent personal injury and to ensure that heavy or
cumbersome parts are not damaged during the process.
CAUTION: For your safety, this product requires two people to lift.
PARTS LIST DESCRIPTION PARTS LIST DESCRIPTION
A
B
C
D
E
F
G
H
ASSEMBLY STEPS
STEP 1:
Taking the barstool parts out of the box and
remove the dust cover. Place parts on a soft and
secure surface.
PICTURE QTY PICTURE QTY
M
I
J
K
L
N
O
Bolt:5/16"-2-1/2"
Flat Washer
Spring washer
dowels
Bolt:5/16"-2"
Screw
screwdriver
INSIDE
Seat frame
Back of chair
Right front leg
Left front leg
Right side crossbar
Left side crossbar
front crossbar
Allen wrench
1 8
1 9
1 9
1 2
1 1
1 6
1 1
1
Align the seat frame(A) to back(B) by using the
location dowels (L) to make sure the holes are in
position,insert the middle hole by using flat
washer (J), spring washer(K), bolt(M) with Allen
wrench(H) ,and repeat the same way to the rest
holes of back (B) but using the bolt (I) ,and
attach the right front leg (C) and left front leg (D)
to the seat frame (A) by using flat washer (J),
spring washer(K), bolt(I) with Allen
wrench(H),but do not tighten ,connecting the
front legs (C&D) with the front crossbar(G) ,the
front legs and back(B) with right side crossbar(E)
and left side crossbar (F) by using the screw(N)
with screwdiver(O)
STEP 3:
Check that all parts are secured. Turn the barstool
upside on a level place to make sure legs are
level ,then tighten all the parts ,and assembly is
complete.
Loading...